The role of BCS (biopharmaceutics classification system) and BDDCS (biopharmaceutics drug disposition classification system) in drug development

No QTc prolongation with CDK 4/6 inhibitor FCN-437c: results of a concentration-QTc analysis from a dedicated study in adult healthy subjects

Cardiotoxicity and QT interval prolongation have been a common cause of withdrawal of drugs from the market. FCN-437c is an oral, second-generation, potent, and selective CDK4/6 inhibitor for the treatment of patients with HR+/HER2- metastatic breast cancer. A single-center, double-blind, randomized, and placebo-controlled clinical study in healthy subjects was conducted to investigate the QTc prolongation potential of FCN-437c utilizing Concentration-QTc (C-QTc) modeling approach. FCN-437c was administered at doses of 300, and 400 mg with single oral administration, along with placebo, in 18 healthy subjects. Electrocardiograms (ECGs) through 24 h holter monitor and blood samples were collected. The Cmax of 400 mg single dose in healthy subjects is similar to that from therapeutic dose 200 mg QD at steady state in patients with cancer. The 90% CI upper limit of ΔΔQTcF at the Cmax geometric mean in both dose groups were <10 ms. It is concluded that FCN-437c has low risk of prolonging the QT interval at therapeutic dose.

Systematic Review Registration

https://clinicaltrials.gov/study/NCT06290466?term=NCT06290466&rank=1, identifier [NCT06290466].

Beyond Cytotoxic Potency: Disposition Features Required to Design ADC Payload

Antibody-drug conjugates (ADCs) have demonstrated impressive clinical usefulness in treating several types of cancer, with the notion of widening of the therapeutic index of the cytotoxic payload through the minimization of the systemic toxicity. Therefore, choosing the most appropriate payload molecule is a particularly important part of the early design phase of ADC development, especially given the highly competitive environment ADCs find themselves in today. The focus of the current review is to describe critical attributes/considerations needed in the discovery and ultimately development of cytotoxic payloads in support of ADC design. In addition to potency, several key dispositional characteristics including solubility, permeability and bystander effect, pharmacokinetics, metabolism, and drug-drug interactions, are described as being an integral part of the integrated activities required in the design of clinically safe and useful ADC therapeutic agents.

Generality of Enhancing the Dissolution Rates of Free Acid Amorphous Solid Dispersions by the Incorporation of Sodium Hydroxide

The incorporation of a counterion into an amorphous solid dispersion (ASD) has been proven to be an attractive strategy to improve the drug dissolution rate. In this work, the generality of enhancing the dissolution rates of free acid ASDs by incorporating sodium hydroxide (NaOH) was studied by surface-area-normalized dissolution. A set of diverse drug molecules, two common polymer carriers (copovidone or PVPVA and hydroxypropyl methylcellulose acetate succinate or HPMCAS), and two sample preparation methods (rotary evaporation and spray drying) were investigated. When PVPVA was used as the polymer carrier for the drugs in this study, enhancements of dissolution rates from 7 to 78 times were observed by the incorporation of NaOH into the ASDs at a 1:1 molar ratio with respect to the drug. The drugs having lower amorphous solubilities showed greater enhancement ratios, providing a promising path to improve the drug release performance from their ASDs. Samples generated by rotary evaporation and spray drying demonstrated comparable dissolution rates and enhancements when NaOH was added, establishing a theoretical foundation to bridge the ASD dissolution performance for samples prepared by different solvent-removal processes. In the comparison of polymer carriers, when HPMCAS was applied in the selected system (indomethacin ASD), a dissolution rate enhancement of 2.7 times by the incorporated NaOH was observed, significantly lower than the enhancement of 53 times from the PVPVA-based ASD. This was attributed to the combination of a lower dissolution rate of HPMCAS and the competition for NaOH between IMC and HPMCAS. By studying the generality of enhancing ASD dissolution rates by the incorporation of counterions, this study provides valuable insights into further improving drug release from ASD formulations of poorly water-soluble drugs.

Impact of Colloidal Drug-Rich Droplet Size and Amorphous Solubility on Drug Membrane Permeability: A Comprehensive Analysis

This study aimed to investigate the impact of amorphous solubility and colloidal drug-rich droplets on drug absorption. The amorphous solubility of cilnidipine (CND) in AS-HF grade of hypromellose acetate succinate (HPMC-AS) solution was significantly reduced compared to that in non-polymer solution due to AS-HF partitioning into the CND-rich phase. In contrast, AS-LF grade of HPMC-AS has minimal effect on the amorphous solubility. The size of colloidal CND-rich droplets formed in the CND-supersaturated solution was less than 100 nm in the presence of AS-HF, while 200-450 nm in the presence of AS-LF. When the CND concentrations were near the amorphous solubility, CND membrane flux was reduced in the presence of AS-HF due to the decrease in the amorphous solubility of CND. However, the CND flux increased with the increase in CND-rich droplets, especially in the AS-HF solution. The size reduction of the CND-rich droplets led to their effective diffusion into the unstirred water layer, enhancing CND flux. In higher CND concentration regions, the CND flux became higher in the AS-HF solution than in the AS-LF solution. Thus, it is essential to elucidate the drug concentration-dependent impact of the colloidal drug-rich droplets on the drug absorption performance to optimize supersaturating formulations.

Investigating pharmacokinetic profiles of Centella asiatica using machine learning and PBPK modelling

Physiologically based pharmacokinetic (PBPK) modeling serves as a valuable tool for determining the distribution and disposition of substances in the body of an organism. It involves a mathematical representation of the interrelationships among crucial physiological, biochemical, and physicochemical parameters. A lack of the values of pharmacokinetic parameters can be challenging in constructing a PBPK model. Herein, we propose an artificial intelligence framework to evaluate a key pharmacokinetic parameter, the intestinal effective permeability (Peff). The publicly available Peff dataset was utilized to develop regression machine learning models. The XGBoost model demonstrates the best test accuracy of R-squared (R2, coefficient of determination) of 0.68. The model is then applied to compute the Peff of asiaticoside and madecassoside, the parent compounds found in Centella asiatica. Subsequently, PBPK modeling was conducted to evaluate the biodistribution of the herbal substances following oral administration in a rat model. The simulation results were evaluated and validated, which agreed with the existing in vivo studies in rats. This in silico pipeline presents a potential approach for investigating the pharmacokinetic parameters and profiles of drugs or herbal substances, which can be used independently or integrated into other modeling systems.

Quantitative Investigation of Intestinal Drug Absorption Enhancement by Drug-Rich Nanodroplets Generated via Liquid-Liquid Phase Separation

Drug-rich droplets formed through liquid-liquid phase separation (LLPS) have the potential to enhance the oral absorption of drugs. This can be attributed to the diffusion of these droplets into the unstirred water layer (UWL) of the gastrointestinal tract and their reservoir effects on maintaining drug supersaturation. However, a quantitative understanding of the effect of drug-rich droplets on intestinal drug absorption is still lacking. In this study, the enhancement of intestinal drug absorption through the formation of drug-rich droplets was quantitatively evaluated on a mechanistic basis. To obtain fenofibrate (FFB)-rich droplets, an amorphous solid dispersion (ASD) of FFB/hypromellose (HPMC) was dispersed in an aqueous medium. Physicochemical characterization confirmed the presence of nanosized FFB-rich droplets in the supercooled liquid state within the FFB/HPMC ASD dispersion. An in situ single-pass intestinal perfusion (SPIP) assay in rats demonstrated that increased quantities of FFB-rich nanodroplets enhanced the intestinal absorption of FFB. The effective diffusion of FFB-rich nanodroplets through UWL would partially contribute to the improved FFB absorption. Additionally, confocal laser scanning microscopy (CLSM) of cross sections of the rat intestine after the administration of fluorescently labeled FFB-rich nanodroplets showed that these nanodroplets were directly taken up by small intestinal epithelial cells. Therefore, the direct uptake of drug-rich nanodroplets by the small intestine is a potential mechanism for improving FFB absorption in the intestine. To quantitatively evaluate the impact of FFB-rich droplets on the FFB absorption enhancement, we determined the apparent permeabilities of the FFB-rich nanodroplets and dissolved FFB based on the SPIP results. The apparent permeability of the FFB-rich nanodroplets was 110-130 times lower than that of dissolved FFB. However, when the FFB-rich nanodroplet concentration was several hundred times higher than that of dissolved FFB, the FFB-rich nanodroplets contributed significantly to FFB absorption improvement. The present study highlights that drug-rich nanodroplets play a direct role in enhancing drug absorption in the gastrointestinal tract, indicating their potential for further improvement of oral absorption from ASD formulations.

Medication use in a cohort of adults with chronic intestinal failure: A prospective cross-sectional study

BACKGROUND

Oral drug therapy may be compromised in chronic intestinal failure (IF) because of alterations in absorption and transit. Only scarce literature is available on which medication patients with chronic IF take in daily life. The aim was to describe the medication use in these patients.

METHODS

A medication history was obtained from adults with chronic IF treated in our tertiary care IF center. Degree of polypharmacy, drug classes, Biopharmaceutics Classification System classes, route of administration, and formulation of drugs were analyzed.

RESULTS

From October 2019 until December 2020, 72 patients (35 patients with short bowel syndrome [SBS] and 37 patients without SBS) were included. Polypharmacy was seen in 85.7% of patients with SBS and 75.7% of patients without SBS. The top three drug classes were proton-pump inhibitors, vitamin D or acetaminophen, and antimotility medication or laxatives/benzodiazepines. Approximately 25% of the drugs were classified as Biopharmaceutics Classification System class I drugs. In patients with SBS (78%) and patients without SBS (74.9%), most medication was taken orally, requiring gastrointestinal absorption of the active substance to be pharmacologically active. Most of these medications (77% in patients with SBS and 80.8% in patients without SBS) were formulated as a capsule or tablet, requiring disintegration and dissolution in the gastrointestinal tract before absorption can take place.

CONCLUSION

Polypharmacy was observed in most patients with chronic IF. Most medication was taken orally in formulations requiring disintegration, dissolution, and gastrointestinal absorption, which could be compromised in chronic IF.

Neural Network Models for Predicting Solubility and Metabolism Class of Drugs in the Biopharmaceutics Drug Disposition Classification System (BDDCS)

BACKGROUND AND OBJECTIVE

The biopharmaceutics drug disposition classification system (BDDCS) categorizes drugs into four classes on the basis of their solubility and metabolism. This framework allows for the study of the pharmacokinetics of transporters and enzymatic metabolization on biopharmaceuticals, as well as drug-drug interactions in the body. The objective of the present study was to develop computational models by neural network models and structural parameters and physicochemical properties to estimate the class of a drug in the BDDCS system.

METHODS

In this study, deep learning methods were utilized to explore the potential of artificial and convolutional neural networks (ANNs and CNNs) in predicting the BDDCS class of 721 substances. The structural parameters and physicochemical properties [Abraham solvation parameters, octanol-water partition (log P) and over the pH range 1-7.5 (log D), number of rotatable bonds, hydrogen bond acceptor numbers, as well as hydrogen bond donor count] are calculated with various software. These compounds were then split into a training set consisting of 602 molecules and a test set of 119 compounds to validate the models.

RESULTS

The results of this study showed that neural network models using applied parameters of the drug, i.e., log D and Abraham solvation parameters, are able to predict the class of solubility and metabolism in the BDDCS system with good accuracy.

CONCLUSIONS

Neural network models are well equipped to deal with the relations between the structural parameters and physicochemical properties of drugs and BDDCS classes. In addition, log D is a more suitable parameter compared with log P in predicting BDDCS.

Improving Oral Bioavailability of Herbal Drugs: A Focused Review of Self-Emulsifying Drug Delivery System for Colon Cancer

One of the most frequent malignancies in the world is colon cancer. Both men and women are affected in the same way. The colon, which makes up the last part of the digestive system and is where water and minerals from food waste are absorbed, is vulnerable to cancer. The most suitable technique of drug administration is oral administration. Aqueous solubility is low in more than 40% of novel chemical entities, resulting in poor oral drug administration. In the formulation of oral medications, low inconsistent bioavailability is a major challenge. Increasing medication bioavailability is one of the most difficult aspects of pharmacological development. Self-nano-emulsifying drug delivery systems (SNEDDS) have been a potential platform for biopharmaceutical classification system class II and IV drugs for oral delivery. Enhanced bioavailability and solubility, control of toxicity, pharmacological effects, improved stability, improved tissue macrophage dispersion, prolonged delivery, and resistance to physical and chemical degradation are just a few benefits of SNEDDS for herbal drugs. To increase activity and address problems associated with herbal drugs, nanosized modern drug delivery technologies are expected to have a promising future. Improved patient compliance, fewer problems with liquid SNEDDS filled in capsules, and enhanced stability SNEDDS are all benefits of converting liquid SNEDDS to solid oral dosage forms or solid SNEDDS. SNEDDS differs from previous solubility augmentation methods due to its biodegradable components, simplicity of large-scale production, and range of drug-targeting possibilities.

Effect of Buffer pH and Concentration on the Dissolution Rates of Sodium Indomethacin-Copovidone and Indomethacin-Copovidone Amorphous Solid Dispersions

The incorporation of counterions into amorphous solid dispersions (ASDs) has been proven to be effective for improving the dissolution rates of ionizable drugs in ASDs. In this work, the effect of dissolution buffer pH and concentration on the dissolution rate of indomethacin-copovidone 40:60 (IMC-PVPVA, w/w) ASD with or without incorporated sodium hydroxide (NaOH) was studied by surface area-normalized dissolution to provide further mechanistic understanding of this phenomenon. Buffer pH from 4.7 to 7.2 and concentration from 20 to 100 mM at pH 5.5 were investigated. As the buffer pH decreased, the IMC dissolution rate from both ASDs decreased. Compared to IMC-PVPVA ASD, the dissolution rate decrease from IMCNa-PVPVA ASD was more resistant to the decrease of buffer pH. In contrast, while buffer concentration had a negligible impact on the IMC dissolution rate from IMC-PVPVA ASD, the increase of buffer concentration significantly reduced the IMC dissolution rate from IMCNa-PVPVA ASD. Surrogate evaluation of microenvironment pH modification by the dissolution of IMCNa-PVPVA ASD demonstrated the successful elevation of buffer microenvironment pH and the suppression of such pH elevation by the increase of buffer concentration. These results are consistent with the hypothesis that the dissolution rate enhancement by the incorporation of counterions originates from the enhanced drug solubility by ionization and the modification of diffusion layer pH in favor of drug dissolution. At the studied drug loading (∼40%), relatively congruent release between IMC and PVPVA was observed when IMC was ionized in ASD or in solution, highlighting the importance of studying the ionization effect on the congruent release of ASDs, especially when drug ionization is expected in vivo. Overall, this work further supports the application of incorporating counterions into ASDs for improving the dissolution rates of ionizable drugs when enabling formulation development is needed.

Exploring LIPIDs for their potential to improves bioavailability of lipophilic drugs candidates: A review

This review aims to provide a thorough examination of the benefits, challenges, and advancements in utilizing lipids for more effective drug delivery, ultimately contributing to the development of innovative approaches in pharmaceutical science. Lipophilic drugs, characterized by low aqueous solubility, present a formidable challenge in achieving effective delivery and absorption within the human body. To address this issue, one promising approach involves harnessing the potential of lipids. Lipids, in their diverse forms, serve as carriers, leveraging their unique capacity to enhance solubility, stability, and absorption of these challenging drugs. By facilitating improved intestinal solubility and selective lymphatic absorption of porously permeable drugs, lipids offer an array of possibilities for drug delivery. This versatile characteristic not only bolsters the pharmacological efficacy of drugs with low bioavailability but also contributes to enhanced therapeutic performance, ultimately reducing the required dose size and associated costs. This comprehensive review delves into the strategic formulation approaches that employ lipids as carriers to ameliorate drug solubility and bioavailability. Emphasis is placed on the critical considerations of lipid type, composition, and processing techniques when designing lipid-based formulations. This review meticulously examines the multifaceted challenges that come hand in hand with lipid-based formulations for lipophilic drugs, offering an insightful perspective on future trends. Regulatory considerations and the broad spectrum of potential applications are also thoughtfully discussed. In summary, this review presents a valuable repository of insights into the effective utilization of lipids as carriers, all aimed at elevating the bioavailability of lipophilic drugs.

Comparative Evaluation of Particle Size Reduction, Salt Formation, and Amorphous Formulation on the Biopharmaceutical Performance of a Weak Base Drug Candidate

Various approaches have been developed to enhance the solubility or dissolution rate for the delivery of poorly water-soluble molecules. In this work, guided by an in silico solubility sensitivity analysis for oral absorption, a comparative assessment of the biopharmaceutical performance of a jet-milled free base, a tosylate salt, and a 50:50 (w/w) amorphous solid dispersion (ASD) with hydroxypropyl methylcellulose acetate succinate (HPMCAS) of a weak base drug candidate, GDC-3280, was conducted. Successful particle size reduction without amorphization or form change was confirmed for the jet-milled free base. The potential of solubility enhancement and desupersaturation risk were identified for tosylate salt and ASD formulation by measurements of tosylate salt solubility product constant (Ksp) and amorphous solubility of GDC-3280. In vitro dissolution testing demonstrated dissolution rate improvement for the jet-milled free base when compared with the unmilled free base and confirmed solubility enhancement followed by desupersaturation for GDC-3280 tosylate salt and ASD formulation. A crystallization inhibitor, hydroxypropyl methylcellulose (HPMC), was found to slow down the desupersaturation of tosylate salt solution, providing general insights for the development of pharmaceutical salts with disproportionation risks. Finally, a pharmacokinetic study in dogs showed that the in vivo exposure increased by 1.7- to 2-fold for the tosylate salt and ASD formulation compared with the jet-milled free base, consistent with the in silico solubility sensitivity analysis for the fraction of drug absorbed. Overall, this work provides insights into the evaluation of multiple formulation approaches for enhancing the biopharmaceutical performance of poorly water-soluble drugs.

Probing Molecular Packing of Amorphous Pharmaceutical Solids Using X-ray Atomic Pair Distribution Function and Solid-State NMR

The structural investigation of amorphous pharmaceuticals is of paramount importance in comprehending their physicochemical stability. However, it has remained a relatively underexplored realm primarily due to the limited availability of high-resolution analytical tools. In this study, we utilized the combined power of X-ray pair distribution functions (PDFs) and solid-state nuclear magnetic resonance (ssNMR) techniques to probe the molecular packing of amorphous posaconazole and its amorphous solid dispersion at the molecular level. Leveraging synchrotron X-ray PDF data and employing the empirical potential structure refinement (EPSR) methodology, we unraveled the existence of a rigid conformation and discerned short-range intermolecular C-F contacts within amorphous posaconazole. Encouragingly, our ssNMR 19F-13C distance measurements offered corroborative evidence supporting these findings. Furthermore, employing principal component analysis on the X-ray PDF and ssNMR data sets enabled us to gain invaluable insights into the chemical nature of the intermolecular interactions governing the drug-polymer interplay. These outcomes not only furnish crucial structural insights facilitating the comprehension of the underlying mechanisms governing the physicochemical stability but also underscore the efficacy of synergistically harnessing X-ray PDF and ssNMR techniques, complemented by robust modeling strategies, to achieve a high-resolution exploration of amorphous structures.

Crushed Tablet Administration for Patients with Dysphagia and Enteral Feeding: Challenges and Considerations

Dysphagia is increasingly common in older adults; it is especially prevalent in long-term care settings. Patients with dysphagia likely require pharmacologic treatment for multiple comorbidities but may find it difficult or impossible to swallow oral medications. Administering crushed medications mixed with a soft food or liquid vehicle, or via a feeding tube, is a common strategy to circumvent swallowing difficulties in patients with dysphagia. However, inappropriate medication use and improper crushing technique can reduce the medication dose a patient receives, alter medication pharmacokinetics and pharmacodynamics, and compromise treatment efficacy and patient safety. Clinical judgment is needed to identify medications that can and cannot be crushed, select a crushing methodology and vehicle for administering crushed medications, and create a strategy for administering multiple medications. A coordinated effort from the entire care team-including physicians, pharmacists, nurses, advanced practice providers, speech therapists, patients, and caregivers-is necessary to develop and implement an individualized plan for administering medications to patients with dysphagia. This review details the current literature regarding the administration of medications that have been altered, such as by crushing tablets or opening capsules, for patients with dysphagia or who are receiving enteral feeding and provides recommendations on best practices.

A Perspective on Model-Informed IVIVC for Development of Subcutaneous Injectables

Subcutaneously administered drugs are growing in popularity for both large and small molecule drugs. However, development of these systems - particularly generics - is slowed due to a lack of formal guidance regarding preclinical testing and in vitro - in vivo correlations (IVIVC). Many of these methods, while appropriate for oral drugs, may not be optimized for the complex injection site physiologies, and release rate and absorption mechanisms of subcutaneous drugs. Current limitations for formulation design and IVIVC can be supported by implementing mechanistic, computational methods. These methods can help to inform drug development by identifying key drug and formulation attributes, and their effects on drug release rates. This perspective, therefore, addresses current guidelines in place for oral IVIVC development, how they may differ for subcutaneously administered compounds, and how modeling and simulation can be implemented to inform design of these products. As such, integration of modeling and simulation with current IVIVC systems can help in driving the development of subcutaneous injectables.

Use of surfactant-based amorphous solid dispersions for BDDCS class II drugs to enhance oral bioavailability: A case report of resveratrol

This paper aimed to improve in vitro dissolution/solubility as well as inhibit intestinal metabolism and thus enhance oral bioavailability for a BDDCS class II drug by constructing surfactant-based amorphous solid dispersions using resveratrol (RES) as a model drug. After preliminary screening of polymers and surfactants, and subsequent prescription optimization, two optimized spray-drying RES-polymer-surfactant ASDs were obtained and exhibited a significant increase in solubility of RES by 2.69-3.45-fold compared to crystalline RES, and by 1.13-1.56-fold compared to corresponding RES-polymer ASDs, maintaining a higher concentration in the dissolution process. A metabolism study using everted sacs showed that two optimized ASDs reduced the concentration ratio of RES-G to RES to 51.66%-52.05% of crystalline RES on the serosal side of the rat everted intestinal sac at 2 h. Consequently, these two RES-polymer-surfactant ASDs achieved significantly higher exposure of RES in the plasma with significant enhancements in C_max (2.33-2.35-fold higher than crystalline RES, and 1.72-2.04-fold higher than corresponding RES-polymer ASDs), and in AUC _0-∞ (3.51-3.56-fold higher than crystalline RES, and 1.38-1.41-fold higher than corresponding RES-polymer ASDs). These advantages of the RES-polymer-surfactant ASDs in oral absorption of RES were attributed to solubilization by ASDs and metabolic inhibition by UGT inhibitors. The introduction of surfactants including EL and Lab to ASDs plays an important role in inhibiting glucuronidation and further improving solubility. This study demonstrated that such surfactant-based amorphous solid dispersions may serve as a new approach to increase the oral absorption of BDDCS class II drugs.

Oral bioavailability of bioactive compounds; modulating factors, in vitro analysis methods, and enhancing strategies

Foods are complex biosystems made up of a wide variety of compounds. Some of them, such as nutrients and bioactive compounds (bioactives), contribute to supporting body functions and bring important health benefits; others, such as food additives, are involved in processing techniques and contribute to improving sensory attributes and ensuring food safety. Also, there are antinutrients in foods that affect food bioefficiency and contaminants that increase the risk of toxicity. The bioefficiency of food is evaluated with bioavailability which represents the amount of nutrients or bioactives from the consumed food reaching the organs and tissues where they exert their biological activity. Oral bioavailability is the result of some physicochemical and biological processes in which food is involved such as liberation, absorption, distribution, metabolism, and elimination (LADME). In this paper, a general presentation of the factors influencing oral bioavailability of nutrients and bioactives as well as the in vitro techniques for evaluating bioaccessibility and is provided. In this context, a critical analysis of the effects of physiological factors related to the characteristics of the gastrointestinal tract (GIT) on oral bioavailability is discussed, such as pH, chemical composition, volumes of gastrointestinal (GI) fluids, transit time, enzymatic activity, mechanical processes, and so on, and the pharmacokinetics factors including BAC and solubility of bioactives, their transport across the cell membrane, their biodistribution and metabolism. The impact of matrix and food processing on the BAC of bioactives is also explained. The researchers' recent concerns for improving oral bioavailability of nutrients and food bioactives using both traditional techniques, for example, thermal treatments, mechanical processes, soaking, germination and fermentation, as well as food nanotechnologies, such as loading of bioactives in different colloidal delivery systems (CDSs), is also highlighted.

PEGylated Erlotinib HCl Injectable Nanoformulation for Improved Bioavailability

The present study was undertaken to synthesize PEGylated monomethoxy poly (ethylene glycol)-poly (ε-Caprolactone) (mPEG-PCL) block copolymer and formulate Erlotinib HCl-loaded mPEG-PCL nanoparticles for enhancing the bioavailability of the drug. Using the ring-opening polymerization technique, PEGylated mPEG-PCL block copolymer was synthesized, and the structure of the copolymer was characterized using FTIR, ¹H-NMR, and DSC techniques. The solvent evaporation approach was used to effectively encapsulate Erlotinib HCl within block copolymeric nanoparticles. Erlotinib HCl-loaded mPEG-PCL nanoparticles had a mean particle size of 146.5 ± 2.37 nm and a zeta potential of -27.8 ± 2.77 mV. The nanoparticles had a percent entrapment efficiency of 80.78 ± 0.09%. The in vitro drug release of Erlotinib HCl-loaded copolymeric nanoparticles showed a slow and sustained release behavior which could be maintained for up to 72 h. The Korsmeyer-Peppas fitting findings indicated that the drug release process followed a non-Fickian diffusion mechanism. The pharmacokinetic (PK) behavior of the developed nanoformulation was studied in albino Wistar rats, and the relative bioavailability of the optimized NP formulation given by intravenous route was found to be 187.33%. The PK data suggested that Erlotinib HCl-loaded mPEG-PCL copolymeric nanoparticles can dramatically alter the PK behavior of Erlotinib HCl and greatly improve the drug's bioavailability by as much as three times when compared to the oral formulation. As a result, it was established that the block copolymeric nanoparticles have promise for the effective encapsulation of Erlotinib HCL for an injectable formulation with increased bioavailability.

Assessment of food effects during clinical development

Food-drug interactions frequently hamper oral drug development due to various physicochemical, physiological and formulation-dependent mechanisms. This has stimulated the development of a range of promising biopharmaceutical assessment tools which, however, lack standardized settings and protocols. Hence, this manuscript aims to provide an overview of the general approach and the methodology used in food effect assessment and prediction. For in vitro dissolution-based predictions, the expected food effect mechanism should be carefully considered when selecting the level of complexity of the model, together with its drawbacks and advantages. Typically, in vitro dissolution profiles are then incorporated into physiologically based pharmacokinetic models, which can estimate the impact of food-drug interactions on bioavailability within 2-fold prediction error, at least. Positive food effects related to drug solubilization in the GI tract are easier to predict than negative food effects. Preclinical animal models also provide a good level of food effect prediction, with beagle dogs remaining the gold standard. When solubility-related food-drug interactions have large clinical impact, advanced formulation approaches can be used to improve fasted state pharmacokinetics, hence decreasing the fasted/fed difference in oral bioavailability. Finally, the knowledge from all studies should be combined to secure regulatory approval of the labelling instructions.

Simplifying the Extended Clearance Concept Classification System (EC3S) to Guide Clearance Prediction in Drug Discovery

PURPOSE

The Extended Clearance Concept Classification System was established as a development-stage tool to provide a framework for identifying fundamental mechanism(s) governing drug disposition in humans. In the present study, the applicability of the EC3S in drug discovery has been investigated. In its current format, the EC3S relies on low-throughput hepatocyte uptake data, which are not frequently generated in a discovery setting.

METHODS

A relationship between hepatocyte uptake clearance and MDCK permeability was first established along with intrinsic clearance from human liver microsomes. The performance of this approach was examined by categorizing 64 drugs into EC3S classes and comparing the predicted major elimination pathway(s) to that observed in humans. As an extension of the work, the ability of the simplified EC3S to predict human systemic clearance based on intrinsic clearance generated using in-vitro metabolic systems was evaluated.

RESULTS

The assessment enabled the use of MDCK permeability and unscaled unbound intrinsic clearance to generate cut-off criteria to categorize compounds into four EC3S classes: Class 12ab, 2cd, 34ab, and 34cd, with major elimination mechanism(s) assigned to each class. The predictivity analysis suggested that systemic clearance could generally be predicted within threefold for EC3S class 12ab and 34ab compounds. For classes 2cd and 34cd, systemic clearance was poorly predicted using in-vitro systems explored in this study.

CONCLUSION

Collectively, our simplified classification approach is expected to facilitate the identification of mechanism(s) involved in drug elimination, faster resolution of in-vitro to in-vivo disconnects, and better design of mechanistic pharmacokinetic studies in drug discovery.

Structural Determinants of Indole-2-carboxamides: Identification of Lead Acetamides with Pan Antimycobacterial Activity

Tuberculosis (TB), caused by Mycobacterium tuberculosis (M.tb), is one of the leading causes of death in developing countries. Non-tuberculous mycobacteria (NTM) infections are rising and prey upon patients with structural lung diseases such as chronic obstructive pulmonary disease (COPD) and cystic fibrosis. All mycobacterial infections require lengthy treatment regimens with undesirable side effects. Therefore, new antimycobacterial compounds with novel mechanisms of action are urgently needed. Published indole-2-carboxamides (IC) with suggested inhibition of the essential transporter MmpL3 showed good potency against whole-cell M.tb, yet had poor aqueous solubility. This project focused on retaining the required MmpL3 inhibitory pharmacophore and increasing the molecular heteroatom percentage by reducing lipophilic atoms. We evaluated pyrrole, mandelic acid, imidazole, and acetamide functional groups coupled to lipophilic head groups, where lead acetamide-based compounds maintained high potency against mycobacterial pathogens, had improved in vitro ADME profiles over their indole-2-carboxamide analogs, were non-cytotoxic, and were determined to be MmpL3 inhibitors.

Oncology phase I trial design and conduct: time for a change - MDICT Guidelines 2022

In 2021, the Food and Drug Administration Oncology Center of Excellence announced Project Optimus focusing on dose optimization for oncology drugs. The Methodology for the Development of Innovative Cancer Therapies (MDICT) Taskforce met to review and discuss the optimization of dosage for oncology trials and to develop a practical guide for oncology phase I trials. Defining a single recommended phase II dose based on toxicity may define doses that are neither the most effective nor the best tolerated. MDICT recommendations address the need for robust non-clinical data which are needed to inform trial design, as well as an expert team including statisticians and pharmacologists. The protocol must be flexible and adaptive, with clear definition of all endpoints. Health authorities should be consulted early and regularly. Strategies such as randomization, intrapatient dose escalation, and real-world eligibility criteria are encouraged whereas serial tumor sampling is discouraged in the absence of a strong rationale and appropriately validated assay. Endpoints should include consideration of all longitudinal toxicity. The phase I dose escalation trial should define the recommended dose range for later testing in randomized phase II trials, rather than a single recommended phase II dose, and consider scenarios where different populations may require different dosages. The adoption of these recommendations will improve dosage selection in early clinical trials of new anticancer treatments and ultimately, outcomes for patients.

Emerging Role of Biopharmaceutical Classification and Biopharmaceutical Drug Disposition System in Dosage form Development: A Systematic Review

Biopharmaceutical classification system (BCS) is an advanced tool used for classifying medicines based on dissolution, water solubility, and intestinal permeability, which affect the absorption of active pharmaceutical ingredients (API) from immediate-release solid oral forms. It is useful to the formulation researchers to develop novel dosage forms based on modernistic rather than experimental approaches. The current review focuses on the fundamentals, objectives, guidance of BCS, characteristics of BCS drugs, their importance and applications of BCS. This review explains the challenges in drug development in terms of solubility and in vivo disposition. In the current review, new strategies for improving BCS II drug solubility as well as biopharmaceutical drug disposition properties which are utilized throughout the early stages of drug development and commercialization are mainly discussed.

Exploring a Bioequivalence Failure for Silodosin Products Due to Disintegrant Excipients

Some years ago, excipients were considered inert substances irrelevant in the absorption process. However, years of study have demonstrated that this belief is not always true. In this study, the reasons for a bioequivalence failure between two formulations of silodosin are investigated. Silodosin is a class III drug according to the Biopharmaceutics Classification System, which has been experimentally proven by means of solubility and permeability experiments. Dissolution tests have been performed to identify conditions concordant with the non-bioequivalent result obtained from the human bioequivalence study and it has been observed that paddles at 50 rpm are able to detect inconsistent differences between formulations at pH 4.5 and pH 6.8 (which baskets at 100 rpm are not able to do), whereas the GIS detects differences at the acidic pH of the stomach. It has also been observed that the differences in excipients between products did not affect the disintegration process, but disintegrants did alter the permeability of silodosin through the gastrointestinal barrier. Crospovidone and povidone, both derivatives of PVP, are used as disintegrants in the test product, instead of the pregelatinized corn starch used in the reference product. Permeability experiments show that PVP increases the absorption of silodosin-an increase that would explain the greater C_max observed for the test product in the bioequivalence study.

Physical aging of hydroxypropyl methylcellulose acetate succinate via enthalpy recovery

Amorphous solid dispersions (ASDs) utilize the kinetic stability of the amorphous state to stabilize drug molecules within a glassy polymer matrix. Therefore, understanding the glassy-state stability of the polymer excipient is critical to ASD design and performance. Here, we investigated the physical aging of hydroxypropyl methylcellulose acetate succinate (HPMCAS), a commonly used polymer in ASD formulations. We found that HPMCAS exhibited conventional physical aging behavior when annealed near the glass transition temperature (T_g). In this scenario, structural recovery was facilitated by α-relaxation dynamics. However, when annealed well below T_g, a sub-α-relaxation process facilitated low-temperature physical aging in HPMCAS. Nevertheless, the physical aging rate exhibited no significant change up to 40 K below T_g, below which it exhibited a near monotonic decrease with decreasing temperature. Finally, infrared spectroscopy was employed to assess any effect of physical aging on the chemical structure of HPMCAS, which is known to be susceptible to degradation at temperatures 30 K above its T_g. Our results provide critical insights necessary to understand better the link between the stability of ASDs and physical aging of the glassy polymer matrix.

Reliable Prediction of Caco-2 Permeability by Supervised Recursive Machine Learning Approaches

The heterogeneity of the Caco-2 cell line and differences in experimental protocols for permeability assessment using this cell-based method have resulted in the high variability of Caco-2 permeability measurements. These problems have limited the generation of large datasets to develop accurate and applicable regression models. This study presents a QSPR approach developed on the KNIME analytical platform and based on a structurally diverse dataset of over 4900 molecules. Interpretable models were obtained using random forest supervised recursive algorithms for data cleaning and feature selection. The development of a conditional consensus model based on regional and global regression random forest produced models with RMSE values between 0.43–0.51 for all validation sets. The potential applicability of the model as a surrogate for the in vitro Caco-2 assay was demonstrated through blind prediction of 32 drugs recommended by the International Council for the Harmonization of Technical Requirements for Pharmaceuticals (ICH) for validation of in vitro permeability methods. The model was validated for the preliminary estimation of the BCS/BDDCS class. The KNIME workflow developed to automate new drug prediction is freely available. The results suggest that this automated prediction platform is a reliable tool for identifying the most promising compounds with high intestinal permeability during the early stages of drug discovery.

Transport and Permeation Properties of Dapivirine: Understanding Potential Drug-Drug Interactions

The dapivirine (DPV) vaginal ring was developed by the nonprofit International Partnership for Microbicides (IPM) for reducing the risk of HIV infection. A clinical study (IPM 028) showed that concomitant use of the DPV ring and miconazole (MIC) altered DPV pharmacokinetic profile. In this work, we investigated whether or not DPV transport and permeation contributed to the observed DPV-MIC interaction. Our study evaluated the interaction between DPV and several transporters that are highly expressed in the human female reproductive tract, including MRP1, MRP4, P-gp, BCRP, and ENT1, using vesicular and cellular systems. We also evaluated the impact of DPV/MIC on cellular tight junctions by monitoring transepithelial electrical resistance with the Ussing chamber. Lastly, we evaluated the effect of MIC on DPV permeability across human cervical tissue. Our findings showed that DPV was not a substrate of MRP1, MRP4, P-gp, BCRP, or ENT1 transporters. Additionally, DPV did not inhibit the activity of these transporters. DPV, MIC, and their combination also did not disrupt cellular tight junctions. MIC did not affect DPV tissue permeability but significantly reduced DPV tissue levels. Therefore, our results suggest that the DPV-MIC interaction is not due to these five transporters, altered tight junction integrity, or altered tissue permeability.

Continuous Manufacturing and Molecular Modeling of Pharmaceutical Amorphous Solid Dispersions

Amorphous solid dispersions enhance solubility and oral bioavailability of poorly water-soluble drugs. The escalating number of drugs with poor aqueous solubility, poor dissolution, and poor oral bioavailability is an unresolved problem that requires adequate interventions. This review article highlights recent solubility and bioavailability enhancement advances using amorphous solid dispersions (ASDs). The review also highlights the mechanism of enhanced dissolution and the challenges faced by ASD-based products, such as stability and scale-up. The role of process analytical technology (PAT) supporting continuous manufacturing is highlighted. Accurately predicting interactions between the drug and polymeric carrier requires long experimental screening methods, and this is a space where computational tools hold significant potential. Recent advancements in data science, computational tools, and easy access to high-end computation power are set to accelerate ASD-based research. Hence, particular emphasis has been given to molecular modeling techniques that can address some of the unsolved questions related to ASDs. With the advancement in PAT tools and artificial intelligence, there is an increasing interest in the continuous manufacturing of pharmaceuticals. ASDs are a suitable option for continuous manufacturing, as production of a drug product from an ASD by direct compression is a reality, where the addition of multiple excipients is easy to avoid. Significant attention is necessary for ongoing clinical studies based on ASDs, which is paving the way for the approval of many new ASDs and their introduction into the market.

Hydroxypropyl methylcellulose acetate succinate as an exceptional polymer for amorphous solid dispersion formulations: A review from bench to clinic

Amorphous solid dispersions (ASDs) are a proven system for achieving a supersaturated state of drug, in which the concentration of drug is greater than its crystalline solubility. The usage of Hydroxypropyl Methylcellulose Acetate Succinate (HPMCAS) in the development of ASDs has grown significantly, as evidenced by the fact that majority of commercially approved ASD formulations are based on HPMCAS. HPMCAS has been widely utilized as a solubility enhancer and precipitation inhibitor or stabilizer to achieve supersaturation and inhibit crystallization of drugs in the gastrointestinal tract. The characteristics of HPMCAS ASDs such as less hygroscopic, strong drug-polymer hydrophobic interactions, high solubilization efficiency, greater potential to generate, maintain drug supersaturation and crystallization inhibition outperform other polymeric carriers in ASD development. Furthermore, combining HPMCAS with other polymers or surfactants as ternary ASDs could be a viable approach for enhancing oral absorption of poorly soluble drugs. This review discusses the concepts of supersaturation maintenance or precipitation inhibition of HPMCAS in the ASD formulations. In addition, the mechanisms underlying for improved dissolution performance, oral bioavailability and stability of HPMCAS ASDs are explored.

Strategies for enhancing the oral bioavailability of cannabinoids

INTRODUCTION

Oral administration of cannabinoids is a convenient route of administration in many cases. To enhance the poor and variable bioavailability of cannabinoids, selected strategies utilizing proper delivery systems have been designed. Low solubility in the GI aqueous media is the first and most critical barrier. Thereafter, cannabinoids can reach the systemic blood circulation via the portal vein that is associated with significant hepatic first pass metabolism (FPM) or bypass it via lymphatic absorption.

AREAS COVERED

The solubility obstacle of cannabinoids is mainly addressed with lipid-based formulations such as self-nanoemulsifying drug delivery systems (SNEDDS). Certain lipids are used to overcome the solubility issue. Surfactants and other additives in the formulation have additional impact on several barriers, including dictating the degree of lymphatic bioavailability and hepatic FPM. Gastro-retentive formulation is also plausible.

EXPERT OPINION

Comparison of the role of the same SNEDDS formulation, cyclosporine vs. cannabinoids, when used to elevate the oral bioavailability of different compounds, is presented. It illustrates some similarities and major mechanistic differences obtained by the same SNEDDS. Thus, the different influence over the absorption pathway illuminates the importance of understanding the absorption mechanism and its barriers to properly select appropriate strategies to achieve enhanced oral bioavailability.

Development of a Microgram Scale Video-Microscopic Method to Investigate Dissolution Behavior of Poorly Water-Soluble Drugs

Poor aqueous solubility is a common characteristic of new drug candidates, which leads to low or inconsistent oral bioavailability. This has sparked an interest in material efficient testing of solubility and dissolution rate. The aim was to develop a microgram scale video-microscopic method to screen the dissolution rates of poorly water-soluble drugs. This method was applied to six drugs (carvedilol, diazepam, dipyridamole, felodipine, fenofibrate, and indomethacin) in fasted state simulated intestinal fluid (FaSSIF), of indomethacin in buffer with varying pH, and of diazepam and dipyridamole in customized media. An additional aim was to track phase transformations for carbamazepine in FaSSIF. The dissolution rates and particle behavior of the drugs were investigated by tracking particle surface area over time using optical video-microscopy. Applying miniaturized UV spectroscopic dissolution resulted in a similar grouping of dissolution rates and pH effects, as for the video-microscopic setup. Using customized media showed that lysophospholipid enhanced the dissolution rate of diazepam and dipyridamole. The video-microscopic setup allowed for the nucleation of transparent particles on dissolving carbamazepine particles to be tracked over time. The developed setup offers a material efficient screening approach to group drugs according to dissolution rate, where the use of optical microscopy helps to achieve a high sample throughput.

Consideration of Fractional Distribution Parameter fd in the Chen and Gross Method for Tissue-to-Plasma Partition Coefficients: Comparison of Several Methods

PURPOSE

The tissue-to-plasma partition coefficient (K_p) describes the extent of tissue distribution in physiologically-based pharmacokinetic (PBPK) models. Constant-rate infusion studies are common for experimental determination of the steady-state K_p,ss, while the tissue-plasma concentration ratio (C_T/C_p) in the terminal phase after intravenous doses is often utilized. The Chen and Gross (C&G) method converts a terminal slope C_T/C_p to K_p,ss based on assumptions of perfusion-limited distribution in tissue-plasma equilibration. However, considering blood flow (Q_T) and apparent tissue permeability (f_upPS_in) in the rate of tissue distribution, this report extends the C&G method by utilizing a fractional distribution parameter (f_d).

METHODS

Relevant PBPK equations for non-eliminating and eliminating organs along with lung and liver were derived for the conversion of C_T/C_p values to K_p,ss. The relationships were demonstrated in rats with measured C_T/C_p and K_p,ss values and the model-dependent f_d for 8 compounds with a range of permeability coefficients. Several methods of assessing K_p were compared.

RESULTS

Utilizing f_d in an extended C&G method, our estimations of K_p,ss from C_T/C_p were improved, particularly for lower permeability compounds. However, four in silico methods for estimating K_p performed poorly across tissues in comparison with measured K_p values. Mathematical relationships between K_p and K_p,ss that are generally applicable for eliminating organs with tissue permeability limitations necessitates inclusion of an extraction ratio (ER) and f_d.

CONCLUSION

Since many different types/sources of K_p are present in the literature and used in PBPK models, these perspectives and equations should provide better insights in measuring and interpreting K_p values in PBPK.

Effects of Elagolix on the Pharmacokinetics of Omeprazole and its Metabolites in Healthy Premenopausal Women

This study evaluated the effect of repeated doses of elagolix on the pharmacokinetics of omeprazole and its metabolites in healthy premenopausal female subjects. Adult premenopausal female subjects (N = 20) received a single oral dose of omeprazole (40 mg) on Day 1 and Day 11 and oral doses of elagolix (300 mg) twice-daily on Days 3 to 11. Serial blood samples for assay of omeprazole and its metabolites were collected for 24 hours after dosing on Days 1 and 11. Pharmacokinetic parameters were calculated for omeprazole, 5-hydroxyomeprazole and omeprazole sulfone; and were compared between Day 1 and Day 11. Pharmacogenetic testing was performed for CYP2C19 variant alleles and the results were used to compare the magnitude of elagolix-omeprazole DDI between the different genotype subgroups. Administration of elagolix 300 mg twice-daily for 9 days increased omeprazole exposure by 1.8-fold and decreased the metabolite-to-parent ratio for 5-hydroxyomeprazole by ~60%. Conversely, there was an increase in the metabolite-to-parent ratio for omeprazole sulfone by 25%. Elagolix increased omeprazole exposures by 2- to 2.5-fold in CYP2C19 Extensive and Intermediate Metabolizer subjects, but decreased omeprazole exposures by 40% in Poor Metabolizer subjects. Exposures of 5-hydroxyomeprazole decreased by 20-30% in all genotype subgroups, and omeprazole sulfone exposures increased by ~3-fold in Extensive and Intermediate Metabolizer subjects. Elagolix is a weak inhibitor of CYP2C19 and exposure of CYP2C19 substrates may be increased upon coadministration with elagolix. Omeprazole may exhibit drug interactions due to multiple mechanisms other than CYP2C19-mediated metabolism; complicating the interpretation of results from omeprazole DDI studies.

Concentration and composition dependent aggregation of Pluronic- and Poly-(2-oxazolin)-Efavirenz formulations in biorelevant media

Many drugs and drug candidates are poorly water-soluble. Intestinal fluids play an important role in their solubilization. However, the interactions of intestinal fluids with polymer excipients, drugs and their formulations are not fully understood. Here, diffusion ordered spectroscopy (DOSY) and nuclear Overhauser effect spectroscopy (NOESY), complemented by cryo-TEM were employed to address this. Efavirenz (EFV) as model drug, the triblock copolymers Pluronic® F-127 (PF127) and poly(2-oxazoline) based pMeOx-b-pPrOzi-b-pMeOx (pOx/pOzi) and their respective formulations were studied in simulated fed-state intestinal fluid (FeSSIF). For the individual polymers, the bile interfering nature of PF127 was confirmed and pure pOx/pOzi was newly classified as non-interfering. A different and more complex behaviour was however observed if EFV was involved. PF127/EFV formulations in FeSSIF showed concentration dependent aggregation with separate colloids at low formulation concentrations, a merging of individual particles at the solubility limit of EFV in FeSSIF and joint aggregates above this concentration. In the case of pOx/pOzi/EFV formulations, coincident diffusion coefficients for pOx/pOzi, lipids and EFV indicate joint aggregates across the studied concentration range. This demonstrates that separate evaluation of polymers and drugs in biorelevant media is not sufficient and their mixtures need to be studied to learn about concentration and composition dependent behaviour.

The Systems of Naringenin with Solubilizers Expand Its Capability to Prevent Neurodegenerative Diseases

BACKGROUND

Naringenin (NAR) is a flavonoid with excellent antioxidant and neuroprotective potential that is limited by its low solubility. Thus, solid dispersions with β-cyclodextrin (β-CD), hydroxypropyl-β-cyclodextrin (HP-β-CD), hydroxypropylmethylcellulose (HPMC), and microenvironmental pH modifiers were prepared.

METHODS

The systems formation analysis was performed by X-Ray Powder Diffraction (XRPD) and Fourier-transform infrared spectroscopy (FT-IR). Water solubility and dissolution rates were studied with a pH of 1.2 and 6.8. In vitro permeability through the gastrointestinal tract (GIT) and the blood-brain barrier (BBB) was assessed with the parallel artificial membrane permeability assay (PAMPA) assay. The antioxidant activity was studied with the 2,2'-azinobis-(3-ethylbenzothiazoline-6-sulfonic acid (ABTS) and cupric ion reducing antioxidant capacity (CUPRAC) assays, while in vitro enzymes studies involved the inhibition of acetylcholinesterase, butyrylcholinesterase, and tyrosinase. For the most promising system, in silico studies were conducted.

RESULTS

NAR solubility was increased 458-fold by the solid dispersion NAR:HP-β-CD:NaHCO₃ in a mass ratio of 1:3:1. The dissolution rate was elevated from 8.216% to 88.712% in a pH of 1.2 and from 11.644% to 88.843% in a pH of 6.8 (within 3 h). NAR GIT permeability, described as the apparent permeability coefficient, was increased from 2.789 × 10^-6 cm s^-1 to 2.909 × 10^-5 cm s^-1 in an acidic pH and from 1.197 × 10^-6 cm s^-1 to 2.145 × 10^-5 cm s^-1 in a basic pH. NAR BBB permeability was established as 4.275 × 10^-6 cm s^-1. The antioxidant activity and enzyme inhibition were also increased. Computational studies confirmed NAR:HP-β-CD inclusion complex formation.

CONCLUSIONS

A significant improvement in NAR solubility was associated with an increase in its biological activity.

Overview of nanoparticulate strategies for solubility enhancement of poorly soluble drugs

Poor aqueous solubility and poor bioavailability are major issues with many pharmaceutical industries. By some estimation, 70-90% drug candidates in development stage while up-to 40% of the marketed products are poorly soluble which leads to low bioavailability, reduced therapeutic effects and dosage escalation. That's why solubility is an important factor to consider during design and manufacturing of the pharmaceutical products. To-date, various strategies have been explored to tackle the issue of poor solubility. This review article focuses the updated overview of commonly used macro and nano drug delivery systems and techniques such as micronization, solid dispersion (SD), supercritical fluid (SCF), hydrotropy, co-solvency, micellar solubilization, cryogenic technique, inclusion complex formation-based techniques, nanosuspension, solid lipid nanoparticles, and nanogels/nanomatrices explored for solubility enhancement of poorly soluble drugs. Among various techniques, nanomatrices were found a promising and impeccable strategy for solubility enhancement of poorly soluble drugs. This article also describes the mechanism of action of each technique used in solubilization enhancement.

Development of a Once-Daily Modified-Release Formulation for the Short Half-Life RIPK1 Inhibitor GSK2982772 using DiffCORE Technology

Purpose

GSK2982772 is a selective inhibitor of receptor-interacting protein kinase-1 (RIPK1) with a short 2- to 3-h half-life. In a previous modified-release (MR) study, a matrix monolithic formulation (80% GSK2982772 released over 12 h) provided a once-daily (QD) pharmacokinetic (PK) profile in the fasted state; however, it was susceptible to food effects. The current study evaluated the safety and PK of MR formulations using GSK proprietary DiffCORE™ technology.

Methods

Part A evaluated PK following single-dose (240 mg) fasted and fed (high-fat meal) administration of three DiffCORE MR formulations within pre-defined in vitro extremes of 80% GSK2982772 released over 12 h (MR-12 h) to 80% GSK2982772 released over 18 h (MR-18 h) versus an immediate-release formulation. Part B evaluated MR-16 h (120–960 mg) in different prandial states.

Results

Pharmacokinetic profiles for all MR formulations and doses tested in the fasted and fed states were consistent with QD dosing.

Conclusions

The DiffCORE technology overcame the food effect vulnerability observed with the matrix monolithic formulation. The MR-16 h formulation was selected for further clinical development as a QD dosing regimen (NCT03649412 September 26, 2018).

Supplementary Information

The online version contains supplementary material available at 10.1007/s11095-021-03124-7.

Untangling Absorption Mechanisms and Variability in Bioequivalence Studies Using Population Analysis

PURPOSE

Both inter-individual (IIV) and inter-occasion (IOV) variabilities are observed in bioequivalence studies. High IOV may be a cause of problems on the demonstration of bioequivalence, despite strict measures are taken to control it. The objective of this study is to investigate further means of controlling IIV by optimizing study design of crossover studies.

METHODS

Data from 18 bioequivalence studies were used to develop population pharmacokinetics (popPK) models to characterize the absorption and disposition processes of 14 drugs, to estimate IOV for each drug substance and to evaluate possible correlations with biopharmaceutical properties of drug substances, classified in accordance to the Biopharmaceutics Drug Disposition Classification System (BDDCS).

RESULTS

Plasma-pharmacokinetics profiles for the 14 drugs analyzed were successfully described using popPK. The pharmacokinetic parameters that showed greater variability were first-order rate constant of absorption, duration of the zero-order absorption process, relative bioavailability and time of latency. ISCV% estimated for C_max seems to correlate with the log-Dose-Number for Class 1, 2 and 3, despite no direct correlation was observed between popPK model residual variability (RUV) and ISCV%. Nevertheless, higher RUV estimates were observed for Class 2 drugs in comparison to Class 1 and 3.

CONCLUSION

Pharmacokinetic parameters related to drug absorption showed greater variability. Ingestion of the IMP along with 240 mL of water showed to standardize gastric emptying. Given the dependency between C_max variability and dose-solubility ratio, for classes 2 and 4, ad libitum water intake may increase C_max and AUC ISCV%. A water ingestion standardization until the expected T_max of the drug is suggested.

Effect of sex and food on the pharmacokinetics of different classes of BCS drugs in rats after cassette administration

The cassette dosing technique is employed in the drug discovery stage of non-clinical studies to obtain pharmacokinetic data from multiple drug candidates in a single experiment. The objective of the current investigation was to evaluate the effect of sex and food on the selected pharmacokinetic parameters of four biopharmaceutical classification system (BCS) drugs (BCS-I: propranolol, BCS-II: diclofenac, BCS-III: atenolol, and BCS-IV: acetazolamide) utilizing cassette dosing in male and female rats under fed and fasting conditions. Different animal groups were dosed intravenous (i.v) and oral at 1 and 10 mg/kg, respectively, in the form of cassette at a dose of 5 mL/kg. Blood samples were analyzed by liquid chromatography-tandem mass spectrometry. Pharmacokinetics parameters were calculated using Phoenix software version 8.1. A significant increase (p < 0.05) of the area under the plasma concentration-time (AUC_0-last) was observed for diclofenac and acetazolamide in females over males after i.v dosing. Additionally, acetazolamide showed greater instantaneous concentration at the time of dosing, and clearance in females (p < 0.05) compared to males after i.v administration. After oral dosing, propranolol exhibited significant variations (p < 0.05) in the maximum drug concentration (C_max), AUC_0-last, the volume of distribution (V_d), and bioavailability in females as compared to males under fed state. Diclofenac showed significant changes (p < 0.05) in AUC_0-last, and clearance (Cl) in females as compared to males under fasting and fed state. However, acetazolamide exhibited a significant enhancement (p < 0.05) in AUC_0-last, V_d, and Cl in fasting females than the males. The data here illustrates that there is an appreciable difference in AUC and C_max values exist in male and female rats under fed and fasting conditions administered with the cassette dosing of tested BCS class drugs.

Smart design approaches for orally administered lipophilic prodrugs to promote lymphatic transport

Challenges to effective delivery of drugs following oral administration has attracted growing interest over recent decades. Small molecule drugs (<1000 Da) are generally absorbed across the gastrointestinal tract into the portal blood and further transported to the systemic circulation via the liver. This can result in a significant reduction to the oral bioavailability of drugs that are metabolically labile and ultimately lead to ineffective exposure and treatment. Targeting drug delivery to the intestinal lymphatics is attracting increased attention as an alternative route of drug transportation providing multiple benefits. These include bypassing hepatic first-pass metabolism and selectively targeting disease reservoirs residing within the lymphatic system. The particular physicochemical requirements for drugs to be able to access the lymphatics after oral delivery include high lipophilicity (logP>5) and high long-chain triglyceride solubility (> 50 mg/g), properties required to enable drug association with the lipoprotein transport pathway. The majority of small molecule drugs, however, are not this lipophilic and therefore not substantially transported via the intestinal lymph. This has contributed to a growing body of investigation into prodrug approaches to deliver drugs to the lymphatic system by chemical manipulation. Optimised lipophilic prodrugs have the potential to increase lymphatic transport thereby improving oral pharmacokinetics via a reduction in first pass metabolism and may also target of disease-specific reservoirs within the lymphatics. This may provide advantages for current pharmacotherapy approaches for a wide array of pathological conditions, e.g. immune disease, cancer and metabolic disease, and also presents a promising approach for advanced vaccination strategies. In this review, specific emphasis is placed on medicinal chemistry strategies that have been successfully employed to design lipophilic prodrugs to deliberately enable lymphatic transport. Recent progress and opportunities in medicinal chemistry and drug delivery that enable new platforms for efficacious and safe delivery of drugs are critically evaluated.

Mechanistic Investigation of Drug Supersaturation in the Presence of Polysorbates as Solubilizing Additives by Solution Nuclear Magnetic Resonance Spectroscopy

The introduction of solubilizing additives has historically been an attractive approach to address the ever-growing proportion of poorly water-soluble drug (PWSD) compounds within the modern drug discovery pipeline. Lipid-formulations, and more specifically micelle formulations, have garnered particular interest because of their simplicity, size, scalability, and avoidance of solid-state limitations. Although micelle formulations have been widely utilized, the molecular mechanism of drug solubilization in surfactant micelles is still poorly understood. In this study, a series of modern nuclear magnetic resonance (NMR) methods are utilized to gain a molecular-level understanding of intermolecular interactions and kinetics in a model system. This approach enabled the understanding of how a PWSD, 17β-Estradiol (E2), solubilizes within a nonionic micelle system composed of polysorbate 80 (PS80). Based on one-dimensional (1D) ¹H chemical shift differences of E2 in PS80 solutions, as well as intermolecular correlations established from 1D selective nuclear Overhauser effect (NOE) and two-dimensional NOE spectroscopy experiments, E2 was found to accumulate within the palisade layer of PS80 micelles. A potential hydrogen-bonding interaction between a hydroxyl group of E2 and a carbonyl group of PS80 alkane chains may allow for stabilizing E2-PS80 mixed micelles. Diffusion and relaxation NMR analysis and particle size measurements using dynamic light scattering indicate a slight increase in the micellar size with increasing degrees of supersaturation, resulting in slower mobility of the drug molecule. Based on these structural findings, a theoretical orientation model of E2 molecules with PS80 molecules was developed and validated by computational docking simulations.

Ciprofibrate-Loaded Nanoparticles Prepared by Nanoprecipitation: Synthesis, Characterization, and Drug Release

Ciprofibrate (CIP) is a highly lipophilic and poorly water-soluble drug, typically used for dyslipidemia treatment. Although it is already commercialized in capsules, no previous studies report its solid-state structure; thus, information about the correlation with its physicochemical properties is lacking. In parallel, recent studies have led to the improvement of drug administration, including encapsulation in polymeric nanoparticles (NPs). Here, we present CIP's crystal structure determined by PXRD data. We also propose an encapsulation method for CIP in micelles produced from Pluronic P123/F127 and PEO-b-PCL, aiming to improve its solubility, hydrophilicity, and delivery. We determined the NPs' physicochemical properties by DLS, SLS, ELS, SAXS and the loaded drug amount by UV-Vis spectroscopy. Micelles showed sizes around 10-20 nm for Pluronic and 35-45 nm for the PEO-b-PCL NPs with slightly negative surface charge and successful CIP loading, especially for the latter; a substantial reduction in ζ-potential may be evidenced. For Pluronic nanoparticles, we scanned different conditions for the CIP loading, and its encapsulation efficiency was reduced while the drug content increased in the nanoprecipitation protocol. We also performed in vitro release experiments; results demonstrate that probe release is driven by Fickian diffusion for the Pluronic NPs and a zero-order model for PEO-b-PCL NPs.

A hydrogel-based implantable multidrug antitubercular formulation outperforms oral delivery

We present a non-immunogenic, injectable, low molecular weight, amphiphilic hydrogel-based drug delivery system (TB-Gel) that can entrap a cocktail of four front-line antitubercular drugs, isoniazid, rifampicin, pyrazinamide, and ethambutol. We showed that TB-Gel is more effective than oral delivery of the combination of four drugs in reducing the mycobacterial infection in mice. Results show that half the dose of chemotherapeutic drugs is sufficient to achieve a comparable therapeutic effect to that of oral delivery.