Effect of high pressure homogenization treatment on the rheological properties of citrus peel fiber/corn oil emulsion

Microfluidized hemp protein isolate: an effective stabilizer for high-internal-phase emulsions with improved oxidative stability

BACKGROUND

Hemp protein isolates (HPIs), which provide a well-balanced profile of essential amino acids comparable to other high-quality proteins, have recently garnered significant attention. However, the underutilized functional attributes of HPIs have constrained their potential commercial applications within the food and agriculture field. This study advocates the utilization of dynamic-high-pressure-microfluidization (DHPM) for the production of stable high-internal-phase emulsions (HIPEs), offering an efficient approach to fully exploit the potential of HPI resources.

RESULTS

The findings underscore the effectiveness of DHPM in producing HPI as a stabilizing agent for HIPEs with augmented antioxidant activity. Microfluidized HPI exhibited consistent adsorption and anchoring at the oil-water interface, resulting in the formation of a dense and compact layer. Concurrently, the compression of droplets within HIPEs gave rise to a polyhedral framework, conferring viscoelastic properties and a quasi-solid behavior to the emulsion. Remarkably, HIPEs stabilized by microfluidized HPI demonstrated superior oxidative and storage stability, attributable to the establishment of an antioxidative barrier by microfluidized HPI particles.

CONCLUSION

This study presents an appealing approach for transforming liquid oils into solid-like fats using HPI particles, all without the need for surfactants. HIPEs stabilized by microfluidized HPI particles hold promise as emerging food ingredients for the development of emulsion-based formulations with enhanced oxidative stability, thereby finding application in the food and agricultural industries. © 2023 Society of Chemical Industry.

Cellulose Isolation from Tomato Pomace: Part II-Integrating High-Pressure Homogenization in a Cascade Hydrolysis Process for the Recovery of Nanostructured Cellulose and Bioactive Molecules

This work proposes a biorefinery approach for utilizing tomato pomace (TP) through a top-down deconstructing strategy, combining mild chemical hydrolysis with high-pressure homogenization (HPH). The objective of the study is to isolate cellulose pulp using different combinations of chemical and physical processes: (i) direct HPH treatment of the raw material, (ii) HPH treatment following acid hydrolysis, and (iii) HPH treatment following alkaline hydrolysis. The results demonstrate that these isolation routes enable the production of cellulose with tailored morphological properties from TP with higher yields (up to +21% when HPH was applied before hydrolysis and approximately +6% when applied after acid or after alkaline hydrolysis). Additionally, the side streams generated by this cascade process show a four-fold increase in phenolic compounds when HPH is integrated after acid hydrolysis compared to untreated sample, and they also contain nanoparticles composed of hemicellulose and lignin, as shown by FT-IR and SEM. Notably, the further application of HPH treatment enables the production of nanostructured cellulose from cellulose pulp derived from TP, offering tunable properties. This approach presents a sustainable pathway for the extraction of cellulose and nanocellulose, as well as the valorization of value-added compounds found in residual biomass in the form of side streams.

Dietary fiber extraction from citrus peel pomace: Yield optimization and evaluation of its functionality, rheological behavior, and microstructure properties

Citrus fruits were widely used in processing and production, generating a large amount of peel pomace and a low utilization rate, resulting in substantial economic losses and environmental risks. It was important to extract compounds from citrus peel pomaces and find suitable preparation methods to improve their yield and physicochemical properties. Grapefruit peel pomace (GP) and navel orange peel pomace (OP) were used as raw materials in this study to prepare green and edible soluble dietary fiber (SDF) and insoluble dietary fiber (IDF). Analysis was done on the effects of solid-liquid ratio, cellulase hydrolysis time, cellulase dosage, and ultrasonic time on dietary fiber (DF) yield. To obtain the best DF preparation conditions, we used range analysis, variance analysis, and orthogonal experimental design. We also analyzed the structural, physicochemical, and rheological characteristics of SDF and IDF. According to the study's findings, SDF and IDF showed a loose and expansive structure with reduced particle size, higher specific surface area, and noticeably better physical and chemical properties after treating GP and OP with ultrasound-assisted composite enzyme method. Both SDF solution and IDF suspension were discovered through rheological analysis to be non-Newtonian pseudoplastic fluids, which was advantageous for expanding their applications in the field of food packaging. In conclusion, DF prepared using the ultrasound-assisted composite enzyme method was an excellent source of edible packaging materials, offering a benchmark for the recycling of other citrus peel wastes and ultimately paving the way for new methods of recycling citrus waste.

Modification of Ginseng Insoluble Dietary Fiber by Enzymatic Method: Structural, Rheological, Thermal and Functional Properties

In this study, the effects of enzymatic modification using cellulase/xylanase on the composition and structural and functional properties of ginseng insoluble dietary fiber (G-IDF) were evaluated. Fourier transform infrared spectroscopy and scanning electron microcopy showed that enzymatic extraction treatment caused obvious structural alterations in ginseng-modified (G-MIDF) samples, which exhibited more porous and completely wrinkled surfaces. Comparing the peak morphology of G-MIDF with untreated IDF using X-ray diffractometry, the G-MIDF sample exhibited split peaks at a 2θ angle of 23.71°, along with the emergence of sharp peaks at 28.02°, 31.78°, and 35.07°. Thermo-gravimetric analysis showed that G-MIDF exhibited a specified range of pyrolysis temperature and is suitable for food applications involving processing at temperatures below 300 °C. Overall, it was evident from rheograms that both G-IDF and G-MIDF exhibited a resemblance with respect to viscosity changes as a function of the shear rate. Enzymatic treatment led to significant (p < 0.05) improvement in water holding, oil retention, water swelling, nitrite ion binding, bile acid binding, cholesterol absorption, and glucose absorption capacities.

The effect of kappa-carrageenan and gum Arabic on the production of guava-banana fruit leather

Guava-banana fruit leather was made by heat-drying a mixture of guava puree, banana puree, sorbitol, kappa-carrageenan or gum Arabic, and water at 60 °C for 8 h in various formulations (F1 to F6). Each formulation was evaluated for its effect on water activity, texture, surface color, proximate composition, pH, ascorbic acid content, antioxidant activity, and sensory properties. Hydrocolloid kappa-carrageenan was found to be the most significant independent variable affecting the desired properties. However, using gum Arabic was more effective at maintaining both water activity and ascorbic acid levels, as well as improving starch digestibility in vitro. In general, there was no discernible effect of the guava to banana ratio in any formulation. While hydrocolloids have no effect on the texture of guava-banana fruit leather, they do affect other sensory characteristics such as color, aroma, taste, and overall. In general, panelists preferred fruit leather made with a 50:50 (F1), 40:60 (F3), or 30:70 (F6) guava-banana ratio and containing kappa-carrageenan.

The Influence of Different Extraction Methods on the Structure, Rheological, Thermal and Functional Properties of Soluble Dietary Fiber from Sanchi (Panax notoginseng) Flower

The influence of different extraction methods, such as acidic (AC), enzymatic (EN), homogenization (H), ultrsonication (U) and alkali (AL), on structure, rheological, thermal and functional properties of soluble dietary fiber (SDF) from Sanchi flower was evaluated in this study. The highest extraction yield (23.14%) was obtained for AL-SDF extract. Glucose (Glc) and galactose (Gal) were found to be the major constituents in Sanchi SDF. Homogenization and Ultrsonication treatments caused significant compaction of pores in the microstructures. FTIR analysis showed increased hydrolysis of pectin and hemicellulose in U, AL and AC-SDF extracts. H-SDF and AC-SDF exhibited similar shear rate change with the rise in shear stress. H-SDF was thermally more stable than other SDF extracts. Among all extraction methods, H-SDF and U-SDF exhibited the highest water holding capacity (WHC), oil-holding capacity (OHC), Bile acid-adsorption capacity (BAC), Cholesterol-adsorption capacity (CAC) and Glucose adsorption capacity (GAC). Thus, Sanchi flower SDF with improved functional properties could be utilized as a functional food ingredient in the development of various food products.

Nano Filling Effect of Nonmeat Protein Emulsion on the Rheological Property of Myofibrillar Protein Gel

Incorporation of vegetable oils through pre-emulsification has received notable attention for delivering polyunsaturated fatty acids to emulsified-type meat products. The two important influencing factors of the rheological property of composite myofibrillar protein (MP) gel are emulsion droplet size and active or inactive interaction between interface and meat proteins. Incorporation of nonmeat protein emulsion (2% protein (w/w), egg-white protein isolate (EPI), porcine plasma protein (PPP), or sodium caseinate (SC)) with different droplet sizes (nano or macro) to a model of 2% MP gel was investigated in this research. The results of drop size measurement showed that 15,000 psi homogenizing could decrease the diameter of emulsion drop from macro- to nanoscale in the range of 324.4−734.5 nm. Active fillers (PPP and EPI emulsions) with nanodroplet size did not influence the viscosity of emulsion-filled composite cold sols but caused positive filling effects on the MP gel matrix after heating, as evidenced by the density microstructure. PPP and EPI nano-emulsion-filled composite MP had a significant high storage modulus enforcement effect, which reached nearly eight times those of other treatments (p < 0.05). Similarly, the results of thermal scanning rheology and a large-deformation mechanical test showed that PPP and EPI emulsions with nanoscale droplets, other than macroscale, had the highest gel strength of heat-induced emulsion-filled composite MP gel (p < 0.05). Overall, these findings will be helpful for selecting the correct pre-emulsified protein and designing the textural properties of foods.

Recent progress in oil-in-water-in-oil (O/W/O) double emulsions

Oil-in-water-in-oil (O/W/O) double emulsions are recognized as an advanced design route for oil structuring that shows promising applications in the pharmaceutical, cosmetic, and food fields. This review summarizes the main research advances of O/W/O double emulsions over the past two decades. It mainly focuses on understanding the preparation strategies, stabilization mechanism, and potential applications of O/W/O double emulsions. Several emulsification strategies are discussed, including traditional two-step emulsification method, phase-inversion approach, membrane emulsification, and microfluidic emulsification. Further, the role of interfacial stabilizers and viscosity in the stability of O/W/O double emulsions will be discussed with a focus on synthetic emulsifiers, natural biopolymer sand solid particles for achieving this purpose. Additionally, analytical methods for evaluating the stability of O/W/O double emulsions, such as advanced microscopy, rheology, and labeling assay are reviewed taking into account potential limitations of these characterization techniques. Moreover, possible innovative food applications are highlighted, such as simulating fat substitutes to decrease the trans- or saturated fatty acid content and developing novel delivery and encapsulation systems. This review paves a solid way for the exploration of O/W/O double emulsions toward large-scale implementation within the food industry.

Cellulose Isolation from Tomato Pomace Pretreated by High-Pressure Homogenization

This work proposes a biorefinery approach for the utilization of agri-food residues, such as tomato pomace (TP), through combining chemical hydrolysis with high-pressure homogenization (HPH), aiming to achieve the isolation of cellulose with tailored morphological properties from underused lignocellulose feedstocks, along with the valorization of the value-added compounds contained in the biomass. Cellulose was isolated from TP using sequential chemical hydrolysis in combination with mechanical pretreatment through HPH. The chemical and structural features of cellulose isolated from TP pretreated by HPH were compared with cellulose isolated from untreated TP through light scattering for particle size distribution, optical and scanning electron microscopy, and Fourier-transform infrared spectroscopy (FT-IR) analysis. HPH pretreatment (80 MPa, 10 passes) not only promoted a slight increase in the yield of cellulose extraction (+9%) but contributed to directly obtaining defibrillated cellulose particles, characterized by smaller irregular domains containing elongated needle-like fibers. Moreover, the selected mild chemical process produced side streams rich in bioactive molecules, evaluated in terms of total phenols and reducing activity. The liquors recovered from acid hydrolysis of TP exhibited a higher biological activity than those obtained through a conventional extraction (80% v/v acetone, 25 °C, 24 h at 180 rpm).

Impact of high-pressure homogenization on the microstructure and rheological properties of citrus fiber

Citrus fiber dispersion with different concentrations (5–25 g/kg) was treated by high-pressure homogenization (90 and 160 MPa) for two cycles. The particle size distribution, hydration properties of powders, morphology and rheological measurements were carried out to study the microstructure and rheological properties changes by high-pressure homogenization (HPH). In conclusion, the HPH can reduce the particle size of fiber, improve the water holding capacity and water binding capacity. Furthermore, fiber shape can be modified from globular cluster to flake-like slices, and tiny pores can be formed on the surface of citrus fiber. The apparent viscosity, storage modulus and loss modulus were increased by HPH whereas the activation energy was reduced. The Hershcel–Bulkley model, Carreau model and Power Law mode were selected to evaluate the rheological properties.