Preparation, characterization and antibacterial mechanism of the chitosan coatings modified by Ag/ZnO microspheres

Overview of strategies to improve the antibacterial property of dental implants

The increasing number of peri-implant diseases and the unsatisfactory results of conventional treatment are causing great concern to patients and medical staff. The effective removal of plaque which is one of the key causes of peri-implant disease from the surface of implants has become one of the main problems to be solved urgently in the field of peri-implant disease prevention and treatment. In recent years, with the advancement of materials science and pharmacology, a lot of research has been conducted to enhance the implant antimicrobial properties, including the addition of antimicrobial coatings on the implant surface, the adjustment of implant surface topography, and the development of new implant materials, and significant progress has been made in various aspects. Antimicrobial materials have shown promising applications in the prevention of peri-implant diseases, but meanwhile, there are some shortcomings, which leads to the lack of clinical widespread use of antimicrobial materials. This paper summarizes the research on antimicrobial materials applied to implants in recent years and presents an outlook on the future development.

An ecofriendly coaxial antibacterial and anticorrosion nanofiber pullulan-ethyl cellulose embedded with carvacrol coating for protection against marine corrosion

Coaxial electrospun coatings with antibacterial and anticorrosion properties have a marked potential to protect against corrosion in marine environments. Ethyl cellulose is a promising biopolymer for corrosion caused by microorganisms owing to its high mechanical strength, nontoxicity, and biodegradability. In this study, a coaxial electrospun coating loaded with antibacterial carvacrol (CV) in the core and anticorrosion pullulan (Pu) and ethyl cellulose (EC) as a shell layer was successfully fabricated. The formation of core-shell structure was confirmed using transmission electron microscopy. Pu-EC@CV coaxial nanofiber had small diameters, uniform distribution, smooth surface, strong hydrophobicity, and no fractures. Electrochemical impedance spectroscopy was used to analyze corrosion of the electrospun coating surface in a medium containing bacterial solution. The results indicated significant corrosion resistance of the coating surface. In addition, the antibacterial activity and mechanism of coaxial electrospun were studied. The Pu-EC@CV nanofiber coating exhibited excellent antibacterial properties by effectively increasing the permeability of cell membranes and killing bacteria, as determined by plate counts, scanning electron microscopy, cell membrane permeability, and the activity of alkaline phosphatase. In summary, the coaxial electrospun pullulan-ethyl cellulose embedded with CV coating can be used as antibacterial and anticorrosion materials and may have potential applications in the field of marine corrosion.

Amoxicillin encapsulated in the N-2-hydroxypropyl trimethyl ammonium chloride chitosan and N,O-carboxymethyl chitosan nanoparticles: Preparation, characterization, and antibacterial activity

This is a report on the encapsulation amoxicillin (AMX) in the N-2-Hydroxypropyl trimethyl ammonium chloride chitosan (N-2-HACC) and N,O-carboxymethyl chitosan (CMCS) nanoparticles (NPs) for biomedical applications. The N-2-HACC/CMCS NPs have broad-spectrum antibacterial properties. In order to achieve sustained and slow drug release, improve drug transport efficiency and bioavailability, prolong drug residence time, and reduce pollution, we synthesized highly efficient, easily absorbed and rapidly degradable nano-formulation veterinary antibiotics in this study. The N-2-HACC/CMCS NPs were used for the encapsulation of AMX, and the cytocompatibility, in vitro release, in vivo drug release kinetics and antimicrobial activity of N-2-HACC/CMCS/AMX NPs were investigated. The NPs displayed a round shape and smooth surface, and the NPs allowed the sustained release of AMX at a much slower rate than that of non-coated AMX. The NPs exhibited excellent cytocompatibility and the antimicrobial activity against Escherichia coli, Acinetobacter baumannii, Streptococcus pneumoniae and Staphylococcus aureus. Moreover, the NPs could store at 4 °C, -20 °C and 25 ± 5 °C for 30 d. These results suggested that the N-2-HACC/CMCS NPs could be availed as a candidate for drug delivery carrier to achieve sustained and slow release, improve bioavailability, prolong residence time at the target site, and reduce the dosage of drug.

Classification and research progress of implant surface antimicrobial techniques

Due to the good biocompatibility and ideal mechanical property, titanium implants have been widely used in dental clinic and orthopedic surgery. However, bacteria induced infection can cause per-implant inflammation and decrease the success rate of implant surgery. Therefore, developing antimicrobial techniques is essential to successful application of titanium implants. Many surface antimicrobial techniques, including antimicrobial coating and surface modifications, have been explored and they always exert antimicrobial effect by reducing bacterial adhesion, inhibiting their metabolism, or destructing cell structure. In this paper, different surface antimicrobial techniques and their recent research progress are reviewed to provide a brief insight on this area.

Proteomics of Streptococcus mutans to Reveal the Antibiofilm Formation Mechanism of Ag/ZnO Nanocomposites with Light-Emitting Diode Radiation

Introduction

As a biofilm-associated disease, dental caries benefits from nanoparticle (NP)-based therapies. Streptococcus mutans (S. mutans) is a primary aetiologic agent for dental caries development. We successfully applied a synergistic therapy of Ag/ZnO nanocomposites combined with light-emitting diode (LED) radiation to inhibit S. mutans biofilms. However, the antibiofilm mechanism has not been fully elucidated, and little is known about the biofilm formation ability of bacteria that survive NP-based therapies.

Methods

This study explored the antibiofilm formation mechanism of this synergistic therapy by an integrated approach based upon proteomics.

Results

Synergistic therapy killed 99.8% of bacteria, while the biofilm formation ability of 0.2% surviving bacteria was inhibited. The proteomic responses of S. mutans to synergistic therapy were comprehensively characterized to unveil the mechanism of bacterial death and biofilm formation inhibition of the surviving bacteria. In total, 55 differentially expressed proteins (12 upregulated and 43 downregulated) were recorded. The bioinformatic analysis demonstrated that cellular integrity damage and regulated expression of structure-associated proteins were the main reasons for bacterial death. In addition, the proteomic study indicated the potential inhibition of metabolism in surviving bacteria and provided a biofilm-related network consisting of 17 differentially expressed proteins, explaining the multiantibiofilm formation actions. Finally, we reported and verified the inhibitory effects of synergistic therapy on sucrose metabolism and D-alanine metabolism, which disturbed the biofilm formation of surviving bacteria.

Conclusion

Our findings demonstrated that synergistic therapy killed most bacteria and inhibited the surviving bacteria from forming biofilms. Furthermore, the antibiofilm formation mechanism was revealed by proteomics analysis of S. mutans after synergistic therapy and subsequent metabolic studies. Our success may provide a showcase to explore the antibiofilm formation mechanism of NP-based therapies using proteomic studies.

Fabrication and characterization of polylactic acid coaxial antibacterial nanofibers embedded with cinnamaldehyde/tea polyphenol with food packaging potential

Polylactic acid (PLA) is a promising food packaging material with biocompatible, nontoxic and biodegradable. In order to reduce the deterioration of aquatic products caused by microorganisms, PLA coaxial nanofiber films with cinnamaldehyde (CMA), tea polyphenol (TP) and its composite as core materials were prepared by using coaxial electrospinning technology. Its microscopic morphology and structure were characterized separately, and its thermal stability, wettability and mechanical properties were determined. The antibacterial activity and antibacterial mechanism of nanofiber films were studied with Shewanella putrefaciens (S. putrefaciens) which is the dominant spoilage of aquatic products as the target of action. The results show that the CMA/TP (m/m = 2:5)-PLA coaxial nanofibers have small diameter, uniform distribution, smooth surface, no pores and fracture. At the same time, the film has strong hydrophobicity, good thermal stability and mechanical properties. Its antibacterial performance is better than that of single-core nanofiber films, which effectively destroys the cell membrane of S. putrefaciens, increases the permeability of cell membrane, and interferes with the synthesis and expression of its protein. The coaxial nanofiber films with CMA, TP and its composite as core material can be used as a fresh-keeping material with antibacterial properties, and has potential application value in the field of food preservation.

C-coordinated O-carboxymethyl chitosan Cu(II) complex exerts antifungal activity by disrupting the cell membrane integrity of Phytophthora capsici Leonian

Damage to the cell membrane is an effective method to prevent drug resistance in plant fungal diseases. Here, we proposed a negative remodeling model of the cell membrane structure induced by the C-coordinated O-carboxymethyl chitosan Cu (II) complex (O-CSLn-Cu). FITC-labeled O-CSLn-Cu (FITC-O-CSLn-Cu) was first synthesized via a nucleophilic substitution reaction and confirmed by FT-IR. FITC-labeled O-CSLn-Cu could pass through the fungal cell membrane, as detected by confocal laser scanning microscopy (CLSM) coupled with fluorescein isothiocyanate (FITC)-fluorescence. O-CSLn-Cu treatment led to apparent morphological changes in the membranes of P. capsici Leonian and giant unilamellar vesicles (GUVs) by transmission electron microscopy (TEM). Then, we performed component analysis of the cell membrane from the P. capsici Leonian affected by O-CSLn-Cu with a particular interest in membrane physicochemical properties. Many unsaturated fatty acids (UFAs) and key enzymes promoting UFA synthesis of the cell membrane were downregulated. Similarly, a large number of membrane proteins responsible for substance transport and biochemical reactions were downregulated. Furthermore, O-CSLn-Cu treatments increased plasma membrane permeability with significant leakage of intercellular electrolytes, soluble proteins and sugars, and lipid peroxidation with decreasing membrane fluidity. Finally, aquaporin 10 was proven to be a potential molecular target sensitive to antimicrobial agents according to composition analysis of membrane structure and immunohistochemistry.