Starch-metal complexes and metal compounds

Reactive extrusion fabrication of thermoplastic starch with Ca2+ heterodentate coordination structure for harvesting multiple-reusable PBAT/TPS films

Creating multiple-reusable PBAT/TPS (PT) films presents a novel solution to reduce carbon emissions from disposable packaging, addressing challenges like the high creep of PBAT and the glycerol migration of TPS. Consequently, adopting reactive extrusion to fabricate reversible cross-linking TPS with high shape memory performance, low migration, and homogeneous dispersion in PBAT matrix was a fascinating strategy. Herein, starch, glycerol and CaCl2 (calcium chloride) were extruded to fabricate TPS-Ca with Ca2+ heterodentate coordination structure and confirmed by XPS, 1H NMR and temperature-dependent FTIR. The results of DMA, dynamic rheology, flow activation energy and SEM revealed that TPS-Ca exhibited significant temperature-sensitive reversible properties and robust melt flow capability, enabling micro-nano scale dispersion in PBAT. Noteworthy, PBAT/TPS-Ca (PT-Ca) would recover 100 % length within 20 s by microwave heating after being loaded under the hygrothermal environment. Meanwhile, the migration weight of glycerol decreased from 2.5 % to 1.2 % for the heat-moisture-treated PBAT/TPS (HPT) and PBAT/TPS-Ca (HPTCa). Remarkably, the tensile strength and elongation at the break of HPT-Ca increased to 20.0 MPa and 924 %, respectively, due to reduced stress concentration sites in the phase interface. In summary, our study provides a streamlined strategy for fabricating multiple-reusable PT, offering a sustainable solution to eliminate carbon emissions linked to disposable plastic.

Novel and safe debranched starch-zinc complexes with endoconcave structure as zinc supplements

Zinc deficiency is a serious risk to human health and growth, especially in children. The development of zinc supplements can effectively reduce this harm. Here, a series of debranched starch‑zinc complexes (DS-Zn) were prepared, whose zinc complexation was inversely proportional to the amylopectin content in the debranched starch (DS). The physicochemical properties of DS-Zn were characterized using the conductivity, XRD, iodine staining and thermogravimetry. Combined with XPS, solid-state 13C NMR and IR, it was elucidated that the structure of DS-Zn is endoconcave structure with 2-O and 3-O of DS on the inner side and 6-O of DS on the outer side, where zinc is located. The DS-Zn exhibits good biosafety including blood, cellular and mutagenicity. In vitro simulations of digestion and zinc-deficient cellular models showed that DS-Zn was more tolerant to the gastrointestinal environment and more effective in zinc supplementation (increased by 33 %) than inorganic zinc supplements. Utilizing the compressibility of starch, DS-Zn was prepared as a more palatable oral cartoon tablet for children. This study will provide important support to advance the development and application of novel starch-based zinc nutritional supplements.

Generation of Sulfonated Lignin-Starch Polymer and Its Use As a Flocculant

This paper reports the polymerization of tall oil lignin (TOL), starch, and 2-methyl-2-propene-1-sulfonic acid sodium salt (MPSA), a sulfonate-containing monomer, in a three-component system to generate flocculants for colloidal systems. By utilizing the advanced 1H, COSY, HSQC, HSQC-TOCSY, and HMBC NMR techniques, it was confirmed that the phenolic substructures of TOL and the anhydroglucose unit of starch were covalently polymerized by the monomer to generate the three-block copolymer. The molecular weight, radius of gyration, and shape factor of the copolymers were fundamentally correlated to the structure of lignin and starch, as well as the polymerization outcomes. The deposition behavior of the copolymer, studied by a quartz crystal microbalance with dissipation (QCM-D) analysis, revealed that the copolymer with a larger molecular weight (ALS-5) deposited more and generated more compact adlayer than the copolymer with a smaller molecular weight on a solid surface. Owing to its higher charge density, molecular weight, and extended coil-like structure, ALS-5 produced larger flocs with faster sedimentation in the colloidal systems, regardless of the extent of agitation and gravitational force. The results of this work provide a new approach to preparing a lignin-starch polymer, i.e., a sustainable biomacromolecule with excellent flocculation performance in colloidal systems.

Biodegradable Binary and Ternary Complexes from Renewable Raw Materials

The aim of this paper is to investigate the interactions between polysaccharides with different electrical charges (anionic and neutral starches) and proteins and fats in food ingredients. Another objective is to understand the mechanisms of these systems and the interdependence between their properties and intermolecular interactions. At present, there are not many studies on ternary blends composed of natural food polymers: polysaccharides of different electrical charge (anionic and neutral starches), proteins and lipids. Additionally, there are no reports concerning what type of interactions between polysaccharide, proteins and lipids exist simultaneously when the components are mixed in different orders. This paper intends to fill this gap. It also presents the application of natural biopolymers in the food and non-food industries.

Preparation and Characterization of Potato Starch Copolymers with a High Natural Polymer Content for the Removal of Cu(II) and Fe(III) from Solutions

Cross-linked potato starch (StMBA) and starch-g-polyacrylamide materials with a high content of natural polymer from 60 to 90 wt.% (St60–St90) were synthesized by double chemical-chemical modification (grafting and cross-linking). Eco-friendly starch absorbents were tested for removal of Cu²⁺ and Fe³⁺ from aqueous solutions. The characteristics of the obtained materials (Fourier transform infrared (FTIR), differential scanning calorimetry (DSC), thermal analysis (TGA), X-Ray Diffraction (XRD) and laser scanning microscopy (LSM)) confirmed their diversity in terms of composition and structure. The effect of N,N’-Methylenebisacrylamide (MBA) and polyacrylamide (PAM) content in the starch graft copolymers, treatment time and concentration of metal ions on adsorption efficiency were investigated. The adsorption efficiency for StMBA was 14.0 mg Cu²⁺/g and 2.9 mg Fe³⁺/g, regardless of the initial concentration of ions, whereas for starch graft copolymer St60 it was 23.0 mg Cu²⁺/g and 21.2 mg Fe³⁺/g. Absorption of Fe(III) was persisted even after 2 days. Pseudo-second order model was used to investigate the adsorption mechanisms. It was found that in addition to the chemical adsorption of ions on the surface, there is sorption inside the polymer network and chelating mechanism may dominate. Satisfactory results were attributed to the adequate grafting of PAM onto starch, the ability to form complexes with metal cations and changes in material structure.