A trifluoropropyl-containing silphenylene-siloxane terpolymer for high temperature gas chromatography

Polysiloxanes-based stationary phases containing methoxy-substituted tetraphenyl–phenyl groups for gas chromotographic separations

3,4-Di(4-methoxy phenyl)-2,5-diphenyl phenyl grafted polysiloxane (MTP) and 3,4-di(3,4,5-trimethoxy phenyl)-2,5-diphenyl phenyl grafted polysiloxane (TMP) were synthesized and statically coated on fused silica capillary columns.

Separation characteristics of wall-coated open-tubular columns for gas chromatography

The application of the solvation parameter model for the classification of wall-coated open-tubular columns for gas chromatography is reviewed. A system constants database for 50 wall-coated open-tubular columns at five equally spaced temperatures between 60 and 140 degrees C is constructed and statistical and chemometric techniques used to identify stationary phases with equivalent selectivity, the effect of monomer chemistry on selectivity, and the selection of stationary phases for method development. The system constants database contains examples of virtually all commercially available common stationary phases.

Determination of the minimum allowable operating temperature of stationary phases in capillary columns by inverse gas chromatography

A method was developed to determine the minimum allowable operating temperature (MiAOT) of wall coated open tubular capillary columns. Two polyethylene glycol and fourteen polysiloxanes phases with different side groups (methyl, phenyl, cyanopropyl, trifluoropropyl, n-octyl) and backbone stiffening units (tetramethyl-p-silphenylene, tetramethyl-p,p'-sildiphenylene ether, carborane) were investigated by inverse gas chromatography. A sigmoidal profile of temperature versus column efficiency was found for almost all phases, as the column efficiency increased with temperature. The MiAOT was defined as that temperature where the column efficiency is half of its original value at elevated temperatures. It was found that the MiAOT of a stationary phase is approx. 60 K higher than its glass transition temperature.

Approaches for the coating of capillary columns with highly phenylated stationary phases for high-temperature GC

Two highly phenylated tetramethyl-p-silphenylene-diphenylsiloxane copolymers were coated on fused silica capillary columns and used as stationary phases in GC. The copolymers offered new insights into the coating process and column preparation due to their physicochemical properties. The fused silica capillary surface had to be pretreated in various ways to achieve a homogeneous film and a well deactivated surface: etching with ammonium bifluoride; leaching with sodium hydroxide and hydrochloric acid; silylation with tetraphenyldimethyldisilazane and triphenylsilylamine. Droplet formation was observed on tetraphenyldimethyldisilazane silylated surfaces leading to capillary columns with low separation efficiency. The topology of inhomogeneous films was investigated by light microscopy, scanning electron microscopy, and Auger electron spectroscopy. It became apparent that the stationary phase did not form droplets but islands, which are connected by a wetting layer according to the Stranski-Krastanov growth mode. Both copolymers are potential stationary phases for high-temperature GC with promising properties. They offer a higher overall polarity than 75% phenyl, 25% methyl-polysiloxanes in combination with increased thermal stability and reduced bleed levels.