An evaluation of the robustness of the Tanaka characterization protocol for reversed-phase liquid chromatography columns

Comparison of three stationary phases in the separation of polyphenyls by liquid chromatography

We present herein new analytical protocols for the separation and structural elucidation of polyphenyls. Three commercially available chromatographic stationary phases are compared in the separation of these non-polar, unfunctionalized, positional isomers. Baseline separation of nine terphenyl and quaterphenyl isomers is achieved in under ten minutes using a rapid gradient elution HPLC method. Complete separation of these, and a further five polyphenyls, is demonstrated. We finally present a linear correlation between solvent accessible surface area and the retention times of these closely related compounds.

Octadecylimidazolium ionic liquids-functionalized carbon dots and their precursor co-immobilized silica as hydrophobic chromatographic stationary phase with enhanced shape selectivity

In this work, 1-vinyl-3-octadecylimidazolium bromide ionic liquids ([C₁₈VIm]Br) and their derived carbon dots (ImC₁₈CDs) were prepared, [C₁₈VIm]Br and ImC₁₈CDs were grafted on the silica to obtain Sil-ImC₁₈ and Sil-ImC₁₈CDs, respectively, and they were also co-grafted on silica which named Sil-ImC₁₈/CDs. Compared with Sil-ImC₁₈ and Sil-ImC₁₈CDs columns, Sil-ImC₁₈/CDs column exhibited enhanced selectivity for separation of tetracyclic/tricyclic polycyclic aromatic hydrocarbon (PAH) isomers, and butylbenzene isomers in reversed-phase liquid chromatography, which may be due to the synergistic effect between ImC₁₈CDs and [C₁₈VIm]Br, the π-π interaction between imidazolium and analytes, etc. Meanwhile, the retention behavior of Sil-ImC₁₈/CDs was further evaluated and compared with the commercial C₁₈ column using different classes of analytes, including standard test mixtures of Tanaka, Engelhardt, SRM869b, SRM870. The results demonstrated that co-grafted column exhibited superior separation performance. And this column was applied to determine the contents of calycosin-7-glucoside, ononin, calycosin and formononetin in the extract of Radix Astragali, which were found that the concentration was 0.25 mg mL^-1, 0.15 mg mL^-1, 0.13 mg mL^-1 and 0.30 mg mL^-1, respectively.

Column Classification/Characterisation of Strong Cation Exchange Phases for the Liquid Chromatographic Analysis of Small Molecular Weight Bases

A simple, rapid and robust protocol for the characterisation of strong cation exchange columns for the analysis of small molecular weight bases is described. A range of ten different phases were characterised, and the resultant selectivity and retention factors analysed using Principal Component Analysis. The score plots for the first and second principal components described 83% of the variability within the dataset. Score plots highlighted the large chromatographic differences observed between the phases, the validity of which was established using a larger range of bases. All the strong cation exchange materials demonstrated a synergistic mixed mode (i.e. ion exchange and hydrophobic) retention mechanism. Principal Component Analysis also highlighted the potential difficulty in locating suitable strong cation exchange “back-up” columns for the analysis of small molecular weight bases in that the characterised columns all displayed very different selectivities. The robustness of the protocol was confirmed by a factorial design experiment.

Investigation into reversed phase chromatography peptide separation systems part I: Development of a protocol for column characterisation

A protocol was defined which utilised peptides as probes for the characterisation of reversed phase chromatography peptide separation systems. These peptide probes successfully distinguished between differing stationary phases through the probe's hydrophobic, electrostatic, hydrogen bonding and aromatic interactions with the stationary phase, in addition, to more subtle interactions such as the phase's ability to separate racemic or isomeric probes. The dominating forces responsible for the chromatographic selectivity of peptides appear to be hydrophobic as well as electrostatic and polar in nature. This highlights the need for other types of stationary phase ligands with possibly mixed mode functionalities / electrostatic / polar interactions for peptide separations rather than the hydrophobic ligands which dominate small molecule separations. Selectivity differences are observed between phases, but it appears that it is the accessibility differences between these phases which play a crucial role in peptide separations i.e. accessibility to silanols, the hydrophobic acetonitrile / ligand layer or a thin adsorbed water layer on the silica surface.

Column Characterization and Selection Systems in Reversed-Phase High-Performance Liquid Chromatography

Reversed-phase high-performance liquid chromatography (RP-HPLC) is the most popular chromatographic mode, accounting for more than 90% of all separations. HPLC itself owes its immense popularity to it being relatively simple and inexpensive, with the equipment being reliable and easy to operate. Due to extensive automation, it can be run virtually unattended with multiple samples at various separation conditions, even by relatively low-skilled personnel. Currently, there are >600 RP-HPLC columns available to end users for purchase, some of which exhibit very large differences in selectivity and production quality. Often, two similar RP-HPLC columns are not equally suitable for the requisite separation, and to date, there is no universal RP-HPLC column covering a variety of analytes. This forces analytical laboratories to keep a multitude of diverse columns. Therefore, column selection is a crucial segment of RP-HPLC method development, especially since sample complexity is constantly increasing. Rationally choosing an appropriate column is complicated. In addition to the differences in the primary intermolecular interactions with analytes of the dispersive (London) type, individual columns can also exhibit a unique character owing to specific polar, hydrogen bond, and electron pair donor-acceptor interactions. They can also vary depending on the type of packing, amount and type of residual silanols, "end-capping", bonding density of ligands, and pore size, among others. Consequently, the chromatographic performance of RP-HPLC systems is often considerably altered depending on the selected column. Although a wide spectrum of knowledge is available on this important subject, there is still a lack of a comprehensive review for an objective comparison and/or selection of chromatographic columns. We aim for this review to be a comprehensive, authoritative, critical, and easily readable monograph of the most relevant publications regarding column selection and characterization in RP-HPLC covering the past four decades. Future perspectives, which involve the integration of state-of-the-art molecular simulations (molecular dynamics or Monte Carlo) with minimal experiments, aimed at nearly "experiment-free" column selection methodology, are proposed.

Stationary phase based on cellulose dodecanoate physically immobilized on silica particles for high-performance liquid chromatography

The chemical agent free preparation of a stationary phase using a natural macromolecule was the focus of this paper. Thermal immobilization of cellulose dodecanoate on silica particles was used for the preparation of a stationary phase without the use of chemical reagents. Cellulose modification was performed to produce a hydrophobic macromolecule with solubility in common organic solvents. The new stationary phase was characterized morphologically and physico-chemically, presenting as spherical particles immobilized with a thin cellulose dodecanoate layer. The degree of substitution of cellulose dodecanoate was 1.7, which resulted in a separation mechanism in reversed phase mode, but with lower hydrophobicity and higher steric selectivity, which are properties from cellulose. These characteristics resulted in a stationary phase with intrinsic selectivity that was able to separate mixtures of polar drugs, homologs of an anionic surfactant and omeprazole isomers, which are not well resolved in typical C₁₈ phases. Considering that cellulose is a natural polymer and the preparation method of stationary phase involves only physical processes of silica modification, the final material presents as a stationary phase with specific retention properties coming from both dodecanoate and cellulose.

Effect-directed analysis supporting monitoring of aquatic environments--An in-depth overview

Aquatic environments are often contaminated with complex mixtures of chemicals that may pose a risk to ecosystems and human health. This contamination cannot be addressed with target analysis alone but tools are required to reduce this complexity and identify those chemicals that might cause adverse effects. Effect-directed analysis (EDA) is designed to meet this challenge and faces increasing interest in water and sediment quality monitoring. Thus, the present paper summarizes current experience with the EDA approach and the tools required, and provides practical advice on their application. The paper highlights the need for proper problem formulation and gives general advice for study design. As the EDA approach is directed by toxicity, basic principles for the selection of bioassays are given as well as a comprehensive compilation of appropriate assays, including their strengths and weaknesses. A specific focus is given to strategies for sampling, extraction and bioassay dosing since they strongly impact prioritization of toxicants in EDA. Reduction of sample complexity mainly relies on fractionation procedures, which are discussed in this paper, including quality assurance and quality control. Automated combinations of fractionation, biotesting and chemical analysis using so-called hyphenated tools can enhance the throughput and might reduce the risk of artifacts in laboratory work. The key to determining the chemical structures causing effects is analytical toxicant identification. The latest approaches, tools, software and databases for target-, suspect and non-target screening as well as unknown identification are discussed together with analytical and toxicological confirmation approaches. A better understanding of optimal use and combination of EDA tools will help to design efficient and successful toxicant identification studies in the context of quality monitoring in multiply stressed environments.

A new methodology to determine the isoeluotropic conditions on ultra-performance flash purification stationary phases from analytical reversed liquid chromatography stationary phase

Nowadays, the determination of the experimental chromatographic conditions to be used in Reversed Phase Liquid Ultra-Performance Flash Purification is still challenging. This is due to four different items. In most cases, flash purification stationary phases are not available with geometry of column used in analytical chromatography. The flash purification columns are single-use only. From the point of view of selectivity and retention, few RPLC phases exist with properties of separation identical for analytical and flash purification supports. Characterization methods and databases used for comparing analytical RPLC columns do not include stationary phases for RP flash purification columns. The goal of this work is to develop a new method development strategy which permits the determination of the experimental chromatographic conditions on RP ultra-performance flash purification columns. It relies on the knowledge of any isocratic conditions obtained on any given initial reversed stationary phase. The final conditions to implement on the RP ultra-performance flash purification phase enable either to keep the retention range of a selected solute constant, or to set it around a previously chosen value. The rules of transfer in linear gradient mode are also described. The methodology was valid, whatever the initial RP stationary and mobile phases, for different chemical classes, whatever the bonding, particle diameter, porous or core shell particle, towards different RP alkyl and analogues stationary and mobile phases.

Column selection for pharmaceutical analyses based on a column classification using four test parameters

This paper focuses on the usability of a previously developed column classification system, applied to pharmaceutical analyses. The separation of two drugs from their respective related substances was investigated on 65 new reversed-phase liquid chromatographic columns. The chromatographic procedure for fluoxetine hydrochloride was performed according to the method prescribed in the European Pharmacopoeia monograph while the separation of gemcitabine hydrochloride was carried out according to the United States Pharmacopeia monograph. It was shown that the column ranking system is a helpful tool in the selection of a suitable column.

Stationary phase characterization and method development

The properties of stationary phases and their characterization methods are reviewed. New and significant developments have occurred in the last few years, and new methods for stationary phase characterization have become available. The characterization methods are discussed, and the differences between the different methods are pointed out. In addition, method development approaches are reviewed, with special emphasis on recent developments that employ multiple parameters in parallel. Also, the renewed interest of temperature as a tool in method development is surveyed.

Description and comparison of chromatographic tests and chemometric methods for packed column classification

The main tests developed in last 20 years to investigate the chromatographic behaviour and the stationary phase properties are described in this paper. These properties are the hydrophobicity, depending on the surface area and the bonding density, the number of accessible residual silanol groups having sometimes different acidity, which can interact with neutral solutes by hydrogen bonds or with the ionic form of basic compounds and the shape or steric selectivity, depending on both the functionality of the silanising agent and the bonding density. Two types of tests are performed, either based on key solutes having well defined properties such as phenol, caffeine, amitriptyline, benzylamine, acenaphtene, o-terphenyl, triphenylene, p-ethylaniline, carotenoid pigments, or on retention models (solvation parameter, hydrophobic subtraction) obtained from the analyses of numerous and varied compounds. Thus, the chromatographic properties are either related to selectivities or retention factors calculated from key solutes, or they are described by interaction coefficients provided by multilinear regression from retention models. Three types of comparison methods are used based on these data. First, simple plots allow the study of differences between the columns as regards to one or two properties. Columns located in the same area of the plot display close properties. Second, chemometric methods such as principal component analysis (PCA) or hierarchical cluster analysis (HCA) can be performed to compare columns. In this case, all the studied properties are included in the comparison, done either by data projection to reduce the space in which the information is located (PCA) or by distance calculation and comparison for drawing a classification (HCA). Neighbouring columns are expected to provide identical chromatographic performances. These two chemometric methods can be used together, PCA before HCA. The third way is to calculate a discrimination factor from a reference column, through calculation methods based on the Pythagorean Theorem: the lower this factor, the closer the column properties. Following the presentation of the analytical conditions, the compounds and the data treatments used by the teams working in this field, the pertinence of the different selectivities, i.e. of the different probe solute couples or of the different interaction coefficients, are discussed as regards their discrimination capacity. The accuracy of chemometric treatments in the discrimination of stationary phases having different functionalities (octadecylsiloxane (ODS), cyano, fluorinated, phenyl, polar embedded group or "aqua" type) will be discussed, as well as their performances in the finer ODS discrimination. New two-dimensional plots, from data gained by different studies will be suggested, to improve the classification of stationary phases having different nature of bonded chains.