Method development for HILIC assays

An HPLC-ESI-QTOF method to analyze polar heteroatomic species in aviation turbine fuel via hydrophilic interaction chromatography

Aviation turbine fuel is a complex mixture of thousands of compounds. An analytical method using hydrophilic interaction liquid chromatography (HILIC) coupled with electrospray ionization and quadrupole time-of-flight mass spectrometry (ESI-QTOF) was developed for the identification of heteroatomic, polar compounds in aviation turbine fuel. Although compounds containing oxygen, nitrogen, and sulfur functional groups are each found at low levels (<0.1 % by mass) in fuels, their presence can generate significant effects on fuel properties. The HILIC-ESI-QTOF method is a combined separation and detection technique that possesses many advantages including a fast and simple sample preparation-requiring no extraction step therefore ensuring no loss of compounds of interest-and the ability to acquire high-fidelity compound data for chemometric analysis of heteroatomic species in aviation turbine fuel. In the development of the method, it was found that the chromatographic conditions and nature of the injection sample had a significant effect on separation efficiency and repeatability. For a sample dataset optimized using a singular aviation turbine fuel, retention time shift was able to be reduced from 0.4 min to 2.0 % relative standard deviation (RSD) to approximately 0.1 min with RSD of 0.4 % using the newly developed method. In addition, a high number of untargeted molecular features (944) and targeted amines (121) were able to be identified when utilizing optimal method conditions. The specific benefits and limitations of utilizing HILIC techniques with HPLC-ESI-QTOF are also discussed herein. This new method is currently being expanded to include analysis of all heteroatoms and is being applied to real fuel sets. The results of these studies are forthcoming.

Serially coupled column liquid chromatography: An alternative separation tool

Despite the rapid development of liquid chromatography (LC) in recent decades, it remains a challenge to achieve the desired chromatographic separation of complex matrices using a single column. Multi-column LC techniques, particularly serially coupled column LC (SCC-LC), have emerged as a promising solution to overcome this challenge. While more attention has been focused on heart-cutting or comprehensive two-dimensional LC, reviews specifically focusing on SCC-LC, which offers advantages in terms of precision and facile instrumentation, are scarce. Here, our concerns are devoted to the progress summary regarding the instrumentation and applications of SCC-LC. Emphasis is placed on column selection aiming to enlarge peak capacity, selectivity, or both through the optimization of combination types (e.g. RPLC-RPLC, -RPLC-HILIC, and achiral-chiral LC), connection devices (e.g. zero dead volume connector, tubing, and T-type connector), elution program (i.e. isocratic or gradient) and detectors (e.g. mass spectrometer, ultraviolet detector, and fluorescence detector). The application of SCC-LC in pharmaceutical, biological, environmental, and food fields is also reviewed, and future perspectives and potential directions for SCC-LC are discussed. We envision that the review can give meaningful information to analytical scientists when facing heavy chromatographic separation tasks for complicated matrices.

Analytical Problems in Separation of Selenomethionine and Its Oxidative Product in HILIC HPLC

Selenomethionine (SeMet) is one of the main selenium forms in foods and supplements. Determining its presence in natural food samples creates difficulties due to possible oxidation processes. The objective of this study was to evaluate the possible degradation of SeMet in water extracts of green teas, one of the most consumed beverages worldwide. Such a medium has not been investigated at this time. The HILIC-HPLC MS/MS method with different stationary phases was used to achieve the satisfactory separation of SeMet and selenomethionine oxide (SeMetO). The addition of dithiothreitol and β-mercaptoethanol, recommended to ensure that SeMet is kept in the reduced form, was also evaluated. The best separation was achieved using the zwitterionic HILIC stationary phase coupled to mass spectrometry and MeOH with water (85/15, v/v) as the eluent. Extraction was done with hot water with the addition of β-mercaptoethanol. The infusions prepared from Lung-Ching teas (from the Zhejiang Province in China) contained the highest concentration of selenium in a typical cup of tea (12.5–17.3 µg L⁻¹). For other tested teas it decreased in the following order: Yunnan > Dilmah > Lipton. For Lung-Ching teas, the sum of concentrations of SeMet and SeMetO corresponded to about 46–63% of the total selenium in their extracts.

Flexible and hierarchical metal-organic framework composite as solid-phase media for facile affinity-tip fabrication to selectively enrich glycopeptides and phosphopeptides

Micro-tip-based solid-phase microextraction is considered as one of the green and powerful analytical sample preparation techniques, but its efficiency is severely hampered by some basic issues such as tedious fabrication, instability of sorbent bed, and blocking of the tip, especially for biological samples due to low permeability. These issues are tackled by introducing a flexible and hierarchical substrate in the microtip, having good mechanical strength and specific functionality to capture the desired biomolecules. Considering the well-ordered and flexible structure of melamine foam, it was used as a substrate and for hydrophilic interaction chromatography (HILIC). Metal-organic framework, due to its excellent characteristics, was grafted on its surface anchored by self-assembling polydopamine. The resulting material was characterized and packed in the tip by just pressing the material in the conical structure of the tip. This affinity tip established good and tunable permeability and was used to selectively enrich glycopeptides as well as phosphopeptides. The affinity tip demonstrated excellent performance to enrich glycopeptides and phosphopeptides with a low limit of detection up to 0.5 fmol μL^-1 from tryptic digests of horseradish peroxidase and β-Casein, respectively, and was stable up to 5 rounds of enrichment. Moreover, this affinity-tip also exhibited high selectivity up to up to 1:1000 (HRP digest to BSA digest) for glycopeptides and 1:200 (β-Casein digest to BSA digest) for phosphopeptides and demonstrated several other fascinating characteristics such as; excellent size exclusion effect for the omission of large-sized proteins, modest backpressure, reproducibility, reusability, smooth enrichment, and successfully applied to a human saliva sample.

Method Optimisation in Hydrophilic-Interaction Liquid Chromatography by Design of Experiments Combined with Quantitative Structure–Retention Relationships

Accurate prediction of the separation conditions for a set of target analytes with no retention data available is fundamental for routine analytical assays but remains a very challenging task. In this paper, a quality by design (QbD) optimisation workflow capable of discovering the optimal chromatographic conditions for separation of new compounds in hydrophilic-interaction liquid chromatography (HILIC) is introduced. This workflow features the application of quantitative structure−retention relationship (QSRR) methodology in conjunction with design of experiments (DoE) principles and was used to carry out a two-level full factorial DoE optimisation for a mixture of pharmaceutical analytes on zwitterionic, amide, amine, and bare silica HILIC stationary phases, with mobile phases containing varying acetonitrile content, mobile phase pH, and salt concentration. A dual-filtering approach that considers both retention time (tR) and structural similarity was used to identify the optimal set of analytes to train the QSRR in order to maximise prediction accuracy. Highly predictive retention models (average R2 of 0.98) were obtained and statistical analysis of the prediction performance of the QSRR models demonstrated their ability to predict the retention times of new compounds based solely on their molecular structures, with root-mean-square errors of prediction in the range 7.6–11.0 %. Further, the obtained retention data for pharmaceutical test compounds were used to compute their separation selectivity, which was used as input into a DoE optimiser in order to select the optimal separation conditions. Experimental separations performed under the chosen optimal working conditions showed good agreement with the theoretical predictions. To the best of our knowledge, this is the first study of a QbD optimisation workflow assisted with dual-filtering-based retention modelling to facilitate the method development process in HILIC.

Comparison of capillary electrophoresis and zwitterionic-hydrophilic interaction capillary liquid chromatography with ultraviolet and mass spectrometry detection for the analysis of microRNA biomarkers

This study evaluates zwitterionic-hydrophilic interaction capillary liquid chromatography (capZIC-HILIC) and capillary electrophoresis (CE) with ultraviolet (UV) and mass spectrometry (MS) detection for the direct, label-free and multiplex analysis of microribonucleic acids (miRNAs). CapZIC-HILIC-UV and CE-UV methods were first optimized, resulting in similar separations for a mixture of three miRNAs (hsa-iso-miR-16-5p, hsa-let-7g-5p, and hsa-miR-21-5p) but with reversal of elution/migration orders and small differences in repeatability, linearity, limit of detection (LOD) and separation efficiency. The established UV methods were transferred and validated in these terms with mass spectrometry (MS) detection, which allowed identifying the miRNAs and characterizing their post-transcriptional modifications. LOD by capZIC-HILIC-MS was 1 μM of miRNA, around 5 times lower than by CE-MS due to the analyte dilution with the sheathflow CE-MS interface and to the slightly increased abundance of alkali metals adducts in the CE-MS mass spectra. In addition, the suction effect promoted by the nebulizer gas in CE-MS negatively affected the already compromised separations. In contrast, CE-MS showed superior repeatabilities with spiked serum samples, as well as reduced costs, extended capillary column durabilities and shorter conditioning times. The comparison of the different methods allows disclosing the current advantages and disadvantages of capZIC-HILIC and CE for the analysis of miRNA biomarkers.

Rapid analysis of pyridinoline and deoxypyridinoline in biological samples by liquid chromatography with mass spectrometry and a silica hydride column

Pyridinoline and deoxypyridinoline crosslinks are biomarkers found in urine for collagen degradation in bone turnover. For the first time, a rapid, sensitive, and ion-pairing free method is described for the analysis of pyridinoline and deoxypyridinoline using ultra-high performance liquid chromatography with Cogent Diamond Hydride column and detection by Q Exactive hybrid quadrupole-orbitrap high resolution accurate mass spectrometry. The separation was achieved using both isocratic and gradient conditions and run time <5 min under isocratic conditions of 20% acetonitrile in water containing 0.1% formic acid. Pyridoxine was used as an internal standard and relative standard deviation of the retention times of both pyridinoline and deoxypyridinoline were <1%. The limit of detection was 0.082 ± 0.023 μM for pyridinoline and 0.118 ± 0.052 μM for deoxypyridinoline. The limit of quantitation was 0.245 ± 0.070 μM for pyridinoline and 0.354 ± 0.157 μM for deoxypyridinoline. The method was validated by the detection and quantitation of both pyridinoline and deoxypyridinoline in skin and urine samples.

Determination of donepezil in human plasma using ultra performance liquid chromatography-tandem mass spectrometry

An ultra performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) method was developed and validated for the quantification of donepezil in human plasma. Donepezil and donepezil-D4 were extracted from human plasma by liquid-liquid extraction using a mixture of hexane and ethyl acetate (70:30 v/v). The extracted samples were analyzed using a Thermo Hypersil Gold C18 column with 5% acetic acid in 20 mM ammonium acetate buffer (pH 3.3) and 100% acetonitrile as a mobile phase with the 60:40 (v:v) isocratic method, at a flow rate of 0.3 mL/min. The injection volume was 3 µL, and the total run time was 3 min. Inter- and intra-batch accuracies ranged from 98.0% to 110.0%, and the precision was below 8%. The developed method was successfully applied to the quantification of donepezil in human plasma. The mean (standard deviation) maximum concentration and the median (range) time to maximum concentration were 8.6 (2.0) ng/mL and 2.0 h (1.0~5.0 h), respectively, in healthy Koreans after oral administration of 5 mg donepezil.

Determination of olopatadine in human tears by hydrophilic interaction liquid chromatography–MS/MS method

Aim: The objective of the study was development of hydrophilic interaction liquid chromatography–ESI/MS/MS method for the determination of olopatadine in tear matrix. Materials & methods: Separation was performed on Acquity BEH amide column (2.1 × 100 mm, 1.7 μm). The mobile phase was consisted of 0.1% formic acid in water and acetonitrile. Mianserin hydrochloride was implemented as an internal standard. The artificial tear fluid was used as matrix. The tear samples were collected using Schirmer test strips. For the optimization of ultra pressure liquid chromatography conditions, Box–Benhken design was utilized. Results: The optimal values of the ion source and collision cell parameters were found. Quantification was performed in multiple reaction monitoring mode. The optimized method was fully validated. Conclusion: The proposed method was utilized for monitoring of olopatadine in human tear.

Chemometric-assisted method development in hydrophilic interaction liquid chromatography: A review

With an enormous growth in the application of hydrophilic interaction liquid chromatography (HILIC), there has also been significant progress in HILIC method development. HILIC is a chromatographic method that utilises hydro-organic mobile phases with a high organic content, and a hydrophilic stationary phase. It has been applied predominantly in the determination of small polar compounds. Theoretical studies in computer-aided modelling tools, most importantly the predictive, quantitative structure retention relationship (QSRR) modelling methods, have attracted the attention of researchers and these approaches greatly assist the method development process. This review focuses on the application of computer-aided modelling tools in understanding the retention mechanism, the classification of HILIC stationary phases, prediction of retention times in HILIC systems, optimisation of chromatographic conditions, and description of the interaction effects of the chromatographic factors in HILIC separations. Additionally, what has been achieved in the potential application of QSRR methodology in combination with experimental design philosophy in the optimisation of chromatographic separation conditions in the HILIC method development process is communicated. Developing robust predictive QSRR models will undoubtedly facilitate more application of this chromatographic mode in a broader variety of research areas, significantly minimising cost and time of the experimental work.

Bioanalytical Method for the Determination of Hydroxyproline in Mouse Kidney by High-Performance Liquid Chromatography with Tandem Mass Spectrometric Detection

An analytical method was developed and validated for the measurement of hydroxyproline (Hyp) levels in mouse kidney by high-performance liquid chromatography with tandem mass spectrometric detection (LC/MS/MS) using an analytical column specially designed for the LC/MS/MS analysis for intact amino acids. Tissue hydrolyzed with hydrochloric acid could be directly injected into the LC/MS/MS, as well as separated and detected using the deuterium labelled Hyp as an internal standard. The calibration curve showed good linearity from 5 to 500 nmol/mg of tissue; the precision and accuracy, including within- and between-run, were less than 6% and within 100 ± 6%, respectively.

Liquid Chromatography with Electrospray Ionization and Tandem Mass Spectrometry Applied in the Quantitative Analysis of Chitin-Derived Glucosamine for a Rapid Estimation of Fungal Biomass in Soil

This method employs liquid chromatography-tandem mass spectrometry to rapidly quantify chitin-derived glucosamine for estimating fungal biomass. Analyte retention was achieved using hydrophilic interaction liquid chromatography, with a zwitter-ionic stationary phase (ZIC-HILIC), and isocratic elution using 60% 5 mM ammonium formate buffer (pH 3.0) and 40% ACN. Inclusion of muramic acid and its chromatographic separation from glucosamine enabled calculation of the bacterial contribution to the latter. Galactosamine, an isobaric isomer to glucosamine, found in significant amounts in soil samples, was also investigated. The two isomers form the same precursor and product ions and could not be chromatographically separated using this rapid method. Instead, glucosamine and galactosamine were distinguished mathematically, using the linear relationships describing the differences in product ion intensities for the two analytes. The m/z transitions of 180 → 72 and 180 → 84 were applied for the detection of glucosamine and galactosamine and that of 252 → 126 for muramic acid. Limits of detection were in the nanomolar range for all included analytes. The total analysis time was 6 min, providing a high sample throughput method.

Retention Study of Flavonoids Under Different Chromatographic Modes

The goal of this study was to investigate the chromatographic behavior of selected flavonoids from their different subgroups (flavonols, flavanones, flavones and isoflavones) in hydrophilic interaction liquid chromatography (HILIC). Chromatographic measurements were made on two different HILIC columns: cross-linked DIOL (Luna HILIC) and zwitterionic sulfoalkylbetaine (SeQuant ZIC-HILIC). Separation parameters such as the content of acetonitrile and pH of an eluent were studied. On the ZIC column, the retention factors of flavonoids increased with decreasing water content in the mobile phase. The increase in pH of the aqueous component mainly affects the polarity of the analytes. DIOL stationary phase shows more or less apparent dual retention mechanism, HILIC at the acetonitrile (ACN) content ≥75% and reversed phase (RP) with lower content of organic modifier. In the presence of ammonium acetate in the mobile phase, the retention of flavonoids onto the DIOL column increases without change in the selectivity of the separations. The similar effect, but considerably smaller was observed for aglycones on the ZIC column. The retention of studied glycosides (hesperidin, rutin) decreases in the presence of salt in the mobile phase. The significantly higher mass spectrometry sensitivity was observed under HILIC conditions in comparison with the most often used RP LC due to much higher content of ACN in the mobile phase. Finally, under optimal chromatographic conditions, the method was validated and applied for the determination of flavonoids in chamomile (Matricaria chamomilla L.) infusion.

Direct injection HILIC-MS/MS analysis of darunavir in rat plasma applying supported liquid extraction

A novel bioanalytical method was developed and validated for the quantitative determination of darunavir (DRV) in rat plasma by employing hydrophilic interaction chromatography and tandem mass spectrometry (HILIC-MS/MS) with supported liquid extraction (SLE). Irbesartan (IRB) was used as an internal standard (IS). The analyte in rat plasma (200 µL) was isolated through SLE using ethyl acetate as the eluting solvent. The chromatographic separation was achieved on Luna-HILIC (250 mm×4.6 mm, 5 μm) column with a mobile phase of 0.1% of formic acid in water:acetonitrile (5: 95, v/v), at a constant flow rate of 1.0 mL/min. The MS/MS ion transitions for DRV (548.1→392.0) and IS (429.2→207.1) were monitored on an ion trap mass spectrometer, operating in the multiple reaction monitoring (MRM) mode. The lower limit of quantitation (LLOQ) was 0.2 ng/mL and quantitation range was 0.2-5000 ng/mL. The method was validated for its selectivity, sensitivity, carryover, linearity, precision, accuracy, recovery, matrix effect and stability. The method was successfully applied to pharmacokinetic study in rats.

A simple LC-MS/MS method using HILIC chromatography for the determination of fosfomycin in plasma and urine: application to a pilot pharmacokinetic study in humans

A high performance liquid chromatography-tandem mass spectrometry (LC-MS/MS) method, using hydrophilic interaction liquid chromatography (HILIC) chromatography for the analysis of fosfomycin in human plasma and urine, has been developed and validated. The plasma method uses a simple protein precipitation using a low volume sample (10 μL) and is suitable for the concentration range of 1 to 2000 μg/mL. The urine method involves a simple dilution of 10 μL of sample and is suitable for a concentration range of 0.1 to 10 mg/mL. The plasma and urine results, reported, respectively, are for recovery (68, 72%), inter-assay precision (≤9.1%, ≤8.1%) and accuracy (range -7.2 to 3.3%, -1.9 to 1.6%), LLOQ precision (4.7%, 3.1%) and accuracy (1.7% and 1.2%), and includes investigations into the linearity, stability and matrix effects. The method was used in a pilot pharmacokinetic study of a critically ill patient receiving i.v. fosfomycin, which measured a maximum and minimum plasma concentration of 222 μg/mL and 172 μg/mL, respectively, after the initial dose, and a maximum and minimum plasma concentration of 868 μg/mL and 591μg/mL, respectively, after the fifth dose. The urine concentration was 2.03 mg/mL after the initial dose and 0.29 mg/mL after the fifth dose.

Facile preparation of polyvinyl alcohol coated SiO2 stationary phases for high performance liquid chromatography

A facile physical method to prepare polyvinyl alcohol coating-based silica stationary phase for HPLC was proposed.

Optimization of harvesting, extraction, and analytical protocols for UPLC-ESI-MS-based metabolomic analysis of adherent mammalian cancer cells

In this study, a liquid chromatography mass spectrometry (LC/MS)-based metabolomics protocol was optimized for quenching, harvesting, and extraction of metabolites from the human pancreatic cancer cell line Panc-1. Trypsin/ethylenediaminetetraacetic acid (EDTA) treatment and cell scraping in water were compared for sample harvesting. Four different extraction methods were compared to investigate the efficiency of intracellular metabolite extraction, including pure acetonitrile, methanol, methanol/chloroform/H2O, and methanol/chloroform/acetonitrile. The separation efficiencies of hydrophilic interaction chromatography (HILIC) and reversed-phase liquid chromatography (RPLC) with UPLC-QTOF-MS were also evaluated. Global metabolomics profiles were compared; the number of total detected features and the recovery and relative extraction efficiencies of target metabolites were assessed. Trypsin/EDTA treatment caused substantial metabolite leakage proving it inadequate for metabolomics studies. Direct scraping after flash quenching with liquid nitrogen was chosen to harvest Panc-1 cells which allowed for samples to be stored before extraction. Methanol/chloroform/H2O was chosen as the optimal extraction solvent to recover the highest number of intracellular features with the best reproducibility. HILIC had better resolution for intracellular metabolites of Panc-1 cells. This optimized method therefore provides high sensitivity and reproducibility for a variety of cellular metabolites and can be applicable to further LC/MS-based global metabolomics study on Panc-1 cell lines and possibly other cancer cell lines with similar chemical and physical properties.

LC–MS metabolomics of polar compounds

The metabolome is the complete set of small molecules coming from protein activity (anabolism and catabolism) in living systems. They have a broad range of chemical structures and physicochemical properties and therefore different analytical methodologies are necessary. Highly polar metabolites, such as sugars and most amino acids are not retained by conventional reversed-phase LC columns. Without sufficient retention, coelution may result in identification problems while the detection of compounds by MS at low concentrations may also be problematic due to ion suppression. In order to retain compounds based on their hydrophilicity, polar stationary phases and hydrophilic-interaction LC provide a complementary tool to reversed-phase LC for untargeted comprehensive metabolite fingerprinting. However, robustness of the methods is still limiting their applications. This review focuses on sample pretreatment, stationary phases, analytical methods and applications for polar compound analysis in biological matrices.