A New Perspective on SPME and SPME Arrow: Formaldehyde Determination by On-Sample Derivatization Coupled with Multiple and Cooling-Assisted Extractions

Formaldehyde (FA) is a toxic compound and a human carcinogen. Regulating FA-releasing substances in commercial goods is a growing and interesting topic: worldwide production sectors, like food industries, textiles, wood manufacture, and cosmetics, are involved. Thus, there is a need for sensitive, economical, and specific FA monitoring tools. Solid-phase microextraction (SPME), with O-(2,3,4,5,6-pentafluorobenzyl)-hydroxylamine (PFBHA) on-sample derivatization and gas chromatography, is proposed for FA monitoring of real-life samples. This study reports the use of polydimethylsiloxane (PDMS) as a sorbent phase combined with innovative commercial methods, such as multiple SPME (MSPME) and cooling-assisted SPME, for FA determination. Critical steps, such as extraction and sampling, were evaluated in method development. The derivatization was performed at 60 °C for 30 min, followed by 15 min sampling at 10 °C, in three cycles (SPME Arrow) or six cycles (SPME). The sensitivity was satisfactory for the method's purposes (LOD-LOQ at 11-36 ng L^-1, and 8-26 ng L^-1, for SPME and SPME Arrow, respectively). The method's linearity ranges from the lower LOQ at trace level (ng L^-1) to the upper LOQ at 40 mg L^-1. The precision range was 5.7-10.2% and 4.8-9.6% and the accuracy was 97.4% and 96.3% for SPME and SPME Arrow, respectively. The cooling MSPME set-up applied to real commercial goods provided results of quality comparable to previously published data.

Characterization of VOCs and additives in Italian PET bottles and studies on potential functional aldehydes scavengers

This study focused on characterization of Volatile Organic Compounds (VOCs) as contaminants and non-volatile additives in Italian PET bottles, also suggesting potential functional aldehydes scavengers. Several VOCs, such as acetic aldehyde (AA), butanal, 3-methyl butanal, 1,3-dioxolane, pentanal, hexanal, octanal, 5-hepten-2-one, nonanal, and decanal, were identified by Head Space-Gas Chromatography/Mass Spectrometry (HS-GC/MS) in the PET bottles used for the packaging of six Italian brands mineral waters. AA, 1,3-dioxolane, octanal, 5-hepten-2-one, nonanal, and decanal were the most abundant compounds identified. These contaminants were also identified in the PET-bottled mineral waters. Different experiments using bottle-grade PET pellets (Btlg-PET) and PET bottles’ fragments with and without the addition of epoxidized soybean oil (ESBO) or erucamide as lubricant/plasticizer additives, poly(m-xylene adipamide) (MXD6), and/or anthranilamide (2-aminobenzamide) as potential aldehydes scavengers were carried out. Mostly VOCs observed in the PET bottles analysed were identified in a neat ESBO sample. The presence of the ESBO additive in the PET-bottle fragments was also observed by matrix-assisted laser desorption/ionization time of flight mass spectrometry analysis (MALDI–TOF MS). The ESBO sub-products were not observed in the virgin btlg-PET pellets analysed by both HS-GC/MS and MALDI–TOF MS. These results suggest that the VOCs come from an ESBO additive probably loaded during the blow-moulding processes used for the manufacturing of PET bottles. Further studies established that MXD6 (1%w), an efficient oxygen scavenger, could be also used as AA scavenger even in the presence of the commonly used anthranilamide.

Trace carbonyl analysis in water samples by integrating magnetic molecular imprinting and capillary electrophoresis

In order to obtain high derivatization efficiency, the overuse of derivative agent 2,4-dinitrophenylhydrazine (2,4-DNPH) is necessary for carbonyl detection. But, the 2,4-DNPH residue will cause background interferences and limit the pre-concentration factor of the target analytes. In order to overcome the bottleneck problems, the magnetic molecularly imprinted polymer based solid-phase extraction (MMIPs-SPE) method was developed with 2,4-dinitroaniline (2,4-DNAN) as the dummy template. The characteristics and selectivity of the MMIPs were investigated. Under the optimized conditions, the enrichment of carbonyls-DNPH derivatives with simultaneous removal of the surplus 2,4-DNPH was achieved. By coupling with capillary electrophoresis (CE), a satisfactory analytical performance was obtained with the detection limit ranging from 1.2 to 8.7 μg L⁻¹ for 8 carbonyls. The MMIPs-SPE-CE method was applied successfully for the carbonyl assessment in stream water, tap water and bottled water. In addition, the migration of carbonyls in bottled drinking water was investigated under UV irradiation and heating.

By integrating MMIPs-SPE method and CE, the enrichment of carbonyls-DNPH derivatives with simultaneous removal of the surplus derivative agent 2,4-DNPH can be achieved.

Influence of ripeness and maceration of the grapes on levels of furan and carbonyl compounds in wine - Simultaneous quantitative determination and assessment of the exposure risk to these compounds

The validated method based on the use of headspace solid phase microextraction (HS-SPME) coupled with the comprehensive two-dimensional gas chromatography with time-of-flight mass spectrometric detection (GC×GC/TOFMS) proved to be appropriate for this first simultaneous quantitative determination of six toxic compounds (formaldehyde, acetaldehyde, ethyl carbamate, furan, furfural and acrolein) found in wines. Acetaldehyde and acrolein coeluted with other wine compounds, which indicated that difficulties could arise if only one-dimensional gas chromatography was used for the determination of these compounds. The advancement of the ripeness degree and increasing the grape maceration time seems to result in higher concentrations of toxic compounds. The exposure to furan, acrolein and ethyl carbamate through wine consumption may pose risks to consumer health, since calculated MOE values were lower than 10,000.

In situ aqueous derivatization as sample preparation technique for gas chromatographic determinations

The use of derivatization reactions is a common practice in analytical laboratories. Although in many cases it is tedious and time-consuming, it does offer a good alternative for the determination of analytes not compatible to gas chromatography. Many of the reactions reported in the literature occur in organic medium. However, in situ aqueous derivatization reactions, which can be performed directly in aqueous medium, offer important advantages over those mentioned above, such as no need of a previous extraction step and easy automation. Here we review the most recent developments and applications of in situ aqueous derivatization. The discussion focuses on the derivatization reactions used for the determination of alcohols and phenols, carboxylic acids, aldehydes and ketones, nitrogen-containing compounds and thiols in different aqueous matrices, such as environmental, biological and food samples. Several reactions are described for each functional group (acylation, alkylation, esterification, among others) and, in some cases, the same reagents can be used for several functional groups, such that there is an unavoidable overlap between sections. Finally, attention is also focused on the techniques used for the introduction of the derivatives formed in the aqueous medium into the chromatographic system. The implementation of in situ aqueous derivatization coupled to preconcentration techniques has permitted the enhancement of recoveries and improvements in the separation, selectivity and sensitivity of the analytical methods.