Chiral separation using capillary electromigration techniques based on ligand exchange principle

Copper (II) Ions Induced Self-Disproportionation of Enantiomers in Capillary Electrophoresis for the Quantification of Atenolol Enantiomers

Despite the fact that the self-disproportionation of enantiomers (SDE) has been found for several decades and has been widely used in crystallization, sublimation and chromatography for the purification or separation of nonracemic compounds, the phenomenon of SDE in capillary electrophoresis (CE) has never been reported up to now. Here, a new approach to separate enantiomers in CE based on SDE was demonstrated by introducing copper (II) ions into the separation media. The enantiomers of atenolol interact with copper ions to produce positively charged complexes with different electrophoretic mobilities from the single molecules. The dynamic equilibrium between homo- or heterochiral complexes (associates) and single molecules of atenolol enantiomers supports the manifestation of SDE. Different mobilities of the single molecules and associates, and different distribution of two enantiomers between the single molecules and associates caused by their different concentrations, produce a net difference in electrodriven migration velocities of the two enantiomers. The relative movement of two enantiomers causes a zone depleted in one enantiomer at the rear end of sample segment, giving a trapezoidal CE curve with a step at the end. Quantification of enantiomers is achieved according to the step height. The analysis does not rely on the use of enantiomerically pure chiral selector and the result agrees with that obtained by conventional chiral CE using a chiral selector.

Chiral fluorescence recognition of glutamine enantiomers by a modified Zr-based MOF based on solvent-assisted ligand incorporation

In this study, three types of chiral fluorescent zirconium-based metal-organic framework materials were synthesized using l-dibenzoyl tartaric acid as the chiral modifier by the solvent-assisted ligand incorporation method, which was the porous coordination network yellow material, denoted as PCN-128Y. PCN-128Y-1 and PCN-128Y-2 featured unique chiral selectivity for the Gln enantiomers amongst seven acids and the highly stable luminescence property, which were caused by the heterochiral interaction and aggregation-induced emission. Furthermore, a rapid fluorescence method for the chiral detection of glutamine (Gln) enantiomers was developed. The homochiral crystals of PCN-128Y-1 displayed enantiodiscrimination in the quenching by d-Gln such that the ratio of enantioselectivity was 2.0 in 30 seconds at pH 7.0, according to the Stern-Volmer quenching plots. The detection limits of d- and l-Gln were 6.6 × 10-4 mol L-1 and 3.3 × 10-4 mol L-1, respectively. Finally, both the maximum adsorption capacities of PCN-128Y-1 for the Gln enantiomers (Q e(l-Gln) = 967 mg g-1; Q e(d-Gln) = 1607 mg g-1) and the enantiomeric excess value (6.2%) manifested that PCN-128Y-1 had strong adsorption capacity for the Gln enantiomers and higher affinity for d-Gln.

Past, present, and future developments in enantioselective analysis using capillary electromigration techniques

Enantioseparation of chiral products has become increasingly important in a large diversity of academic and industrial applications. The separation of chiral compounds is inherently challenging and thus requires a suitable analytical technique that can achieve high resolution and sensitivity. In this context, CE has shown remarkable results so far. Chiral CE offers an orthogonal enantioselectivity and is typically considered less costly than chromatographic techniques, since only minute amounts of chiral selectors are needed. Several CE approaches have been developed for chiral analysis, including chiral EKC and chiral CEC. Enantioseparations by EKC benefit from the wide variety of possible pseudostationary phases that can be employed. Chiral CEC, on the other hand, combines chromatographic separation principles with the bulk fluid movement of CE, benefitting from reduced band broadening as compared to pressure-driven systems. Although UV detection is conventionally used for these approaches, MS can also be considered. CE-MS represents a promising alternative due to the increased sensitivity and selectivity, enabling the chiral analysis of complex samples. The potential contamination of the MS ion source in EKC-MS can be overcome using partial-filling and counter-migration techniques. However, chiral analysis using monolithic and open-tubular CEC-MS awaits additional method validation and a dedicated commercial interface. Further efforts in chiral CE are expected toward the improvement of existing techniques, the development of novel pseudostationary phases, and establishing the use of chiral ionic liquids, molecular imprinted polymers, and metal-organic frameworks. These developments will certainly foster the adoption of CE(-MS) as a well-established technique in routine chiral analysis.

Chiral Micellar Electrokinetic Chromatography

The potential of Micellar Electrokinetic Chromatography to achieve enantiomeric separations is reviewed in this article. The separation principles and the most frequently employed separation strategies to achieve chiral separations by Micellar Electrokinetic Chromatography are described. The use of chiral micellar systems alone or combined with other micellar systems or chiral selectors, as well as of mixtures of achiral micellar systems with chiral selectors is discussed together with the effect of different additives present in the separation medium. Indirect methods based on the derivatization of analytes with chiral derivatizing reagents and the use of achiral micelles are also considered. Preconcentration techniques employed to improve sensitivity and the main approaches developed to facilitate the coupling with Mass Spectrometry are included. The most recent and relevant methodologies developed by chiral Micellar Electrokinetic Chromatography and their applications in different fields are presented.

Capillary electrophoresis fingerprints combined with Linear Quantitative Profiling Method to monitor the quality consistency and predict the antioxidant activity of Alkaloids of Sophora flavescens

Alkaloids of Sophora flavescens (ASF) has various pharmacological effects, and it is widely used in clinical practice. The aim of this research was to develop an environmentally friendly methodology that enables not only identification but also the quality consistency assessment of Alkaloids of Sophora flavescens. A background electrolyte composed of 50 mmol/L sodium tetraborate solution, 500 mmol/L boric acid and 1.2 mmol/L citric acid was used to conduct the fingerprint analysis coupled with quantitative determination of three components. Linear quantitative profiling method was used for comprehensive quality discrimination of the test samples from both qualitative and quantitative perspectives, and the 27 batches of samples were well differentiated. In addition, the fingerprint-efficacy relationship between chemical components and antioxidant activity in vitro was established using partial least squares regression model, which provided important medicinal efficacy information for quality control.

Chiral Selectors in Capillary Electrophoresis: Trends During 2017⁻2018

Chiral separation is an important process in the chemical and pharmaceutical industries. From the analytical chemistry perspective, chiral separation is required for assessing the fit-for-purpose and the safety of chemical products. Capillary electrophoresis, in the electrokinetic chromatography mode is an established analytical technique for chiral separations. A water-soluble chiral selector is typically used. This review therefore examines the use of various chiral selectors in electrokinetic chromatography during 2017–2018. The chiral selectors were both low and high (macromolecules) molecular mass molecules as well as molecular aggregates (supramolecules). There were 58 papers found by search in Scopus, indicating continuous and active activity in this research area. The macromolecules were sugar-, amino acid-, and nucleic acid-based polymers. The supramolecules were bile salt micelles. The low molecular mass selectors were mainly ionic liquids and complexes with a central ion. A majority of the papers were on the use or preparation of sugar-based macromolecules, e.g., native or derivatised cyclodextrins. Studies to explain chiral recognition of macromolecular and supramolecular chiral selectors were mainly done by molecular modelling and nuclear magnetic resonance spectroscopy. Demonstrations were predominantly on drug analysis for the separation of racemates.

Recognition Mechanisms of Chiral Selectors: An Overview

Stereospecific recognition of chiral molecules plays an important role in nature as the basis of the interaction of chiral bioactive compounds with the chiral target structures. In separation sciences such as chromatographic and capillary electromigration techniques, interactions between chiral analytes and chiral selectors, i.e., the formation of transient diastereomeric complexes in thermodynamic equilibria, are the basis for chiral separations. Due to the large structural variety of chiral selectors, different structural features contribute to the overall chiral recognition process. This introductory chapter briefly summarizes the present understanding of the structural enantioselective recognition processes for various types of chiral selectors.

Construction of chiral ligand exchange capillary electrochromatography for d,l-amino acids enantioseparation and its application in glutaminase kinetics study

A chiral ligand exchange capillary electrochromatography (CLE-CEC) protocol was designed and implemented for d,l-amino acids enantioseparation with poly(maleic anhydride-styrene-methacryloyl-l-arginine methyl ester) as the coating. The block copolymer was synthesized through the reversible addition fragmentation chain transfer reaction. In the constructed CLE-CEC system, poly (methacryloyl-l-arginine methyl ester) moiety of the block copolymer played the role as the immobilized chiral ligand and Zn (II) was used as the central ion. Key factors, including pH of buffer solution, ratio of Zn (II) to ligands, the mass ratio of monomers in the block copolymer, which affect the enantioresolution were investigated. Comparing with the bare capillary, the CLE-CEC enantioresolution was enhanced greatly with the coating one. 5 Pairs of d,l-amino acids enantiomers obtained baseline separation with 5 pairs partly separated. The mechanism of enhancement enantioresolution of the developed CLE-CEC system was explored briefly. Further, good linearities were achieved in the range of 25.0 μM-5.0 mM for quantitative analysis of d-glutamine (r² = 0.997) and l-glutamine (r² = 0.991). Moreover, the proposed CLE-CEC assay was successfully applied in the kinetics study of glutaminase by using l-glutamine as the substrate.

Chiral recognition in separation science - an update

Stereospecific recognition of chiral molecules is an important issue in various aspects of life sciences and chemistry including analytical separation sciences. The basis of analytical enantioseparations is the formation of transient diastereomeric complexes driven by hydrogen bonds or ionic, ion-dipole, dipole-dipole, van der Waals as well as π-π interactions. Recently, halogen bonding was also described to contribute to selector-selectand complexation. Besides structure-separation relationships, spectroscopic techniques, especially NMR spectroscopy, as well as X-ray crystallography have contributed to the understanding of the structure of the diastereomeric complexes. Molecular modeling has provided the tool for the visualization of the structures. The present review highlights recent contributions to the understanding of the binding mechanism between chiral selectors and selectands in analytical enantioseparations dating between 2012 and early 2016 including polysaccharide derivatives, cyclodextrins, cyclofructans, macrocyclic glycopeptides, proteins, brush-type selectors, ion-exchangers, polymers, crown ethers, ligand-exchangers, molecular micelles, ionic liquids, metal-organic frameworks and nucleotide-derived selectors. A systematic compilation of all published literature on the various chiral selectors has not been attempted.

Significance and challenges of stereoselectivity assessing methods in drug metabolism

Stereoselectivity in drug metabolism can not only influence the pharmacological activities, tolerability, safety, and bioavailability of drugs directly, but also cause different kinds of drug-drug interactions. Thus, assessing stereoselectivity in drug metabolism is of great significance for pharmaceutical research and development (R&D) and rational use in clinic. Although there are various methods available for assessing stereoselectivity in drug metabolism, many of them have shortcomings. The indirect method of chromatographic methods can only be applicable to specific samples with functional groups to be derivatized or form complex with a chiral selector, while the direct method achieved by chiral stationary phases (CSPs) is expensive. As a detector of chromatographic methods, mass spectrometry (MS) is highly sensitive and specific, whereas the matrix interference is still a challenge to overcome. In addition, the use of nuclear magnetic resonance (NMR) and immunoassay in chiral analysis are worth noting. This review presents several typical examples of drug stereoselective metabolism and provides a literature-based evaluation on current chiral analytical techniques to show the significance and challenges of stereoselectivity assessing methods in drug metabolism.

Enantiomer Separations by Capillary Electrophoresis

Capillary electrophoresis (CE) is a versatile and flexible technique for analytical enantioseparations. This is due to the large variety of chiral selectors as well as the different operation modes including electrokinetic chromatography, micellar electrokinetic chromatography, and microemulsion electrokinetic chromatography. The chiral selector, which is added to the background electrolyte, represents a pseudostationary phase with its own electrophoretic mobility allowing a variety of different separation protocols. The present chapter briefly addresses the basic fundamentals of CE enantioseparations as well as the most frequently applied chiral selectors and separation modes. The practical example illustrates the separation of the enantiomers of a positively charged analyte using native and charged cyclodextrin derivatives as chiral selectors.

Chiral separation of D/L-aldoses by micellar electrokinetic chromatography using a chiral derivatization reagent and a phenylboronic acid complex

A novel method was developed for D/L-isomeric separation of aldopentoses and aldohexoses as their (S)-(+)-4-(N,N-dimethylaminosulfonyl)-7-(3-aminopyrrolidin-1-yl)-2,1,3-benzoxadiazole derivatives using phenylboronate buffer containing sodium dodecyl sulfate as a background electrolyte. The combination of derivatization with a chiral labeling reagent and micellar electrokinetic chromatography with phenylboronate made possible the efficient separation of D/L isomers as well as epimeric isomers of aldopentoses and aldohexoses. Laser-induced fluorescence detection permitted the micromolar-level determination of monosaccharide derivatives. The limit of detection was 105 amol (300 nM), and the repeatabilities of the migration times and peak area responses were 0.8 % and 7.9 % (relative standard deviation; n = 6), respectively. The method was applied to the determination of D/L- galactose in red seaweed.

Enantioseparation of dansyl amino acids and dipeptides by chiral ligand exchange capillary electrophoresis based on Zn(II)-L-hydroxyproline complexes coordinating with γ-cyclodextrins

A chiral ligand exchange capillary electrophoresis (CLE-CE) method using Zn(II) as the central ion and L-4-hydroxyproline as the chiral ligand coordinating with γ-cyclodextrin (γ-CD) was developed for the enantioseparation of amino acids (AAs) and dipeptides. The effects of various separation parameters, including the pH of the running buffer, the ratio of Zn(II) to L-4-hydroxyproline, the concentration of complexes and cyclodextrins (CDs) were systematically investigated. After optimization, it has been found that eight pairs of labeled AAs and six pairs of labeled dipeptides could be baseline-separated with a running electrolyte of 100.0mM boric acid, 5.0mM ammonium acetate, 3.0mM Zn(II), 6.0mM L-hydroxyproline and 4.0mM γ-CD at pH 8.2. The quantitation of AAs and dipeptides was conducted and good linearity (r(2)≥0.997) and favorable repeatability (RSD≤3.6%) were obtained. Furthermore, the proposed method was applied in determining the enantiomeric purity of AAs and dipeptides. Meanwhile, the possible enantiorecognition mechanism based on the synergistic effect of chiral metal complexes and γ-CD was explored and discussed briefly.

Chiral capillary electromigration techniques-mass spectrometry-hope and promise

Analytical methods for chiral compounds require a separation step prior to mass spectrometric detection. CE can separate enantiomers by the use of a chiral selector and can be hyphenated with MS. The chiral selector can be either embedded inside the capillary (electrochromatography) or added into the background solution (EKC). This review describes the fundamentals and highlights the recent developments (September 2009-May 2013) of chiral CEC and EKC with detection using MS. There were 20 research and more than 30 review papers during this period. The research efforts were driven by fundamental studies, such as the development of novel chiral selectors in electrochromatography and of advanced partial filling techniques in EKC in order to optimise separation. Other developments were in application studies, such as in food analytics and metabolomics.

Differentiation of enantiomers by capillary electrophoresis

Capillary electrophoresis (CE) has matured to one of the major liquid phase enantiodifferentiation techniques since the first report in 1985. This can be primarily attributed to the flexibility as well as the various modes available including electrokinetic chromatography (EKC), micellar electrokinetic chromatography (MEKC), and microemulsion electrokinetic chromatography (MEEKC). In contrast to chromatographic techniques, the chiral selector is mobile in the background electrolyte. Furthermore, a large variety of chiral selectors are available that can be easily combined in the same separation system. In addition, the migration order of the enantiomers can be adjusted by a number of approaches. In CE enantiodifferentiations the separation principle is comparable to chromatography while the principle of the movement of the analytes in the capillary is based on electrophoretic phenomena. The present chapter will focus on mechanistic aspects of CE enantioseparations including enantiomer migration order and the current understanding of selector-selectand structures. Selected examples of the basic enantioseparation modes EKC, MEKC, and MEEKC will be discussed.

Chiral metal-ion complexes for enantioseparation by capillary electrophoresis and capillary electrochromatography: a selective review

This review gives an overview about chiral separation by capillary electrophoresis and capillary electrochromatography using different chiral metal-ion complexes. The topic enantioseparation is still of big interest for chiral drugs and natural compounds. Regarding chiral drugs it is often the case that the enantiomers differ in activity. The chiral separation principle of ligand-exchange (LE) can be enabled for liquid chromatography, capillary electrophoresis as well as for capillary electrochromatography. Ligand-exchange can be applied particularly for chiral amino acids, amino alcohols or α-hydroxy acids. Examples and applications are given along with the latest developments.