Fabrication of large-sized silica monolith exceeding 1000 mL with high structural homogeneity

Powdered Hierarchically Porous Silica Monoliths for the Selective Extraction of Scandium

Scandium (Sc) is a high value Critical Material that is most commonly used in advanced alloys. Due to current and potential supply limitations, there has been an international effort to find new and improved ways to extract Sc from existing and novel resources. Solid-phase extraction (SPE) is one promising approach for Sc recovery, particularly for use with low-grade feedstocks. Here, unfunctionalized, powdered hierarchically porous silica monoliths from DPS Inc. (DPS) are used for Sc extraction in batch and semicontinuous flow systems at model conditions. The sorbent exhibits excellent mass transfer properties, much like the whole monoliths, which should permit Sc to be rapidly recovered from large volumes of feedstock. The Sc adsorption capacity of the material is ∼142.7 mg/g at pH 6, dropping to ∼12.0 mg/g at pH 3, and adsorption is furthermore highly selective for Sc compared with the other rare earth elements (REEs). Under semicontinuous flow conditions, recovery efficiency is limited by a kinetic process. The primary mechanism responsible for the system's slow approach to equilibrium is the Sc adsorption reaction kinetics rather than inter- or intraparticle diffusion. Overall, this unmodified hierarchically porous silica powder from DPS shows great promise for the selective extraction of Sc from various feedstocks.

Ultralow flow liquid chromatography and related approaches: A focus on recent bioanalytical applications

Ultralow flow LC employs ultra-narrow bore columns and mid-range pL/min to low nL/min flow rates (i.e., ≤20 nL/min). The separation columns that are used under these conditions are typically 2-30 μm in inner diameter. Ultralow flow LC systems allow for exceptionally high sensitivity and frequently high resolution. There has been an increasing interest in the analysis of scarce biological samples, for example, circulating tumor cells, extracellular vesicles, organelles, and single cells, and ultralow flow LC was efficiently applied to such samples. Hence, advances towards dedicated ultralow flow LC instrumentation, technical approaches, and higher throughput (e.g., tens-to-hundreds of single cells analyzed per day) were recently made. Here, we review the types of ultralow flow LC technology, followed by a discussion of selected representative ultralow flow LC applications, focusing on the progress made in bioanalysis of amount-limited samples during the last 10 years. We also discuss several recently reported high-sensitivity applications utilizing flow rates up to 100 nL/min, which are below commonly used nanoLC flow rates. Finally, we discuss the path forward for future developments of ultralow flow LC.

Challenges and Advances in the Fabrication of Monolithic Bioseparation Materials and their Applications in Proteomics Research

High-performance liquid chromatography integrated with tandem mass spectrometry (HPLC-MS/MS) has become a powerful technique for proteomics research. Its performance heavily depends on the separation efficiency of HPLC, which in turn depends on the chromatographic material. As the "heart" of the HPLC system, the chromatographic material is required to achieve excellent column efficiency and fast analysis. Monolithic materials, fabricated as continuous supports with interconnected skeletal structure and flow-through pores, are regarded as an alternative to particle-packed columns. Such materials are featured with easy preparation, fast mass transfer, high porosity, low back pressure, and miniaturization, and are next-generation separation materials for high-throughput proteins and peptides analysis. Herein, the recent progress regarding the fabrication of various monolithic materials is reviewed. Special emphasis is placed on studies of the fabrication of monolithic capillary columns and their applications in separation of biomolecules by capillary liquid chromatography (cLC). The applications of monolithic materials in the digestion, enrichment, and separation of phosphopeptides and glycopeptides from biological samples are also considered. Finally, advances in comprehensive 2D HPLC separations using monolithic columns are also shown.

Monolith columns for liquid chromatographic separations of intact proteins: A review of recent advances and applications

In this article we survey 256 references (with an emphasis on the papers published in the past decade) on monolithic columns for intact protein separation. Protein enrichment and purification are included in the broadly defined separation. After a brief introduction, we describe the types of monolithic columns and modes of chromatographic separations employed for protein separations. While the majority of the work is still in the research and development phase, papers have been published toward utilizing monolithic columns for practical applications. We survey these papers as well in this review. Characteristics of selected methods along with their pros and cons will also be discussed.

On the underestimated impact of the gelation temperature on macro- and mesoporosity in monolithic silica

Elucidating pore formation in monolithic SiO₂: small variations in gelation temperature have a surprisingly strong impact on the meso- and macroporosity.

Characterization of nanoporous structures: from three dimensions to two dimensions

The scanning electron microscope (SEM) has revealed a colorful three-dimensional world due to its great depth of field. However, the abundance of structural information imposes tough challenges to quantitative image analysis. In the current investigation, we developed a SEM-image polishing (SIP) based quantitative SEM-image analysis (QSIA) technique. As an example, QSIA was employed to characterize nanoporous silica. The results confirmed that the nanoporous silica samples, processed via sol-gel methods, were single-parameter, with the pore size being the only variable. The QSIA technique may pave the way to fast and accurate data mining of nanoscaled materials.

Continuous flow vortex fluidic synthesis of silica xerogel as a delivery vehicle for curcumin

Sol–gel synthesis of silica xerogel using a continuous flow vortex fluidic device at room temperature is effective in direct incorporation of preformed curcumin particles, which has antimicrobial activity against Staphylococcus aureus.

Hydrothermal preparation of hybrid carbon/silica monolithic capillary column for liquid chromatography

A simple, easy and economical approach for the preparation of a hybrid carbon/silica monolithic capillary column was described for the first time by using silica monolith as framework in combination with hydrothermal carbonization at 180°C. During the preparation process, formamide was introduced to the reaction solutions to reduce the dissolution rate of monolithic silica skeleton and its optimal concentration was 1.5 M. Fourier transform infrared spectrometry, scanning electron microscopy, energy dispersive X-ray spectrometry, and inverse size exclusion chromatography were carried out to characterize the as-prepared column. The results demonstrated that carbon spheres ranging from 150 to 1000 nm were successfully attached to the surface of silica skeleton. The prepared hybrid carbon/silica column had a permeability of 4.4 × 10(-14) m(2). Chromatographic performance of the column was evaluated by separation of various compounds including alkylbenzenes, nucleosides and bases, and aromatic acids. The column exhibited an efficiency of 75,000 plates/m for butylbenzene at the optimal linear velocity of 0.23 mm/s. The successful separation of these compounds and the study on mechanism indicated that the column can be applied in mixed-mode chromatography.

Monoliths: special issue in a new package

Regular special issues concerning monoliths have always been a stronghold of the Journal of Separation Science. Typically, we issued a call for papers, collected and processed the submitted manuscripts, and all of them were then printed in a single issue of the journal. This approach worked to a certain limit quite acceptably but there was always a longer waiting time between the early submissions and publication. This is why we decided to do it this year differently. I claimed in my 2013 New Years Editorial: "We are living in the electronic era! Why not to make an advantage of that?" And we do. As a result, all manuscript submitted for publication in the special issue Monoliths have already been published in regular issues as soon as they were accepted. The first page of these papers includes a footnote: "This paper is included in the virtual special issue Monoliths available at the Journal of Separation Science website." All papers published with this footnote were collected in a virtual special issue accessible through the internet. This concept ruled out possible delays in publication of contributions submitted early. Since we did not have any real "special issue", there was no need for any hard deadline for submission. We just collected manuscripts submitted for the special issue Monoliths published from January to July 2013 and included them in the virtual special issue. This new approach worked very well and we published 22 excellent papers that are included in the issue available now at this website: http://onlinelibrary.wiley.com/journal/10.1002/(ISSN)1615-9314/homepage/virtual_special_issue__monoliths.htm.