Preparation of Molecularly Imprinted Polymer Microspheres for Selective Solid-Phase Extraction of Capecitabine in Urine Samples

Molecularly imprinted solid-phase extraction to treat biological samples has attracted considerable attention. Herein, molecularly imprinted polymer (MIP) microspheres with porous structures were prepared by a combined suspension-iniferter polymerization method using capecitabine (CAP) as a template molecule. This material was subsequently used as a solid-phase extraction agent to separate and enrich drug molecules in urine samples. UV analysis revealed that methacrylate (MAA) was an ideal functional monomer, and 1H Nuclear Magnetic Resonance (1H NMR), Ultraviolet (UV), and Fourier transform-infrared (FT-IR) spectroscopic analyses were used to study the interaction forces between MAA and CAP, demonstrating that hydrogen bonding was the primary interaction force. MIPs with outstanding selectivity were successfully prepared, and the analysis of their surface morphology and chemical structure revealed a spherical morphology with small holes distributed across a rough surface. This surface morphology significantly reduced the mass transfer resistance of template molecules, providing an ideal template recognition effect. Using the molecularly imprinted solid-phase extraction method, CAP and the structural analog cytidine (CYT) were pretreated in urine samples and quantified by HPLC. The results showed that CAP and CYT recoveries reached 97.2% and 39.8%, respectively, with a limit of detection of 10.0–50.0 µg·mL−1. This study provides a novel approach to drug molecule pretreatment that can be applied in drug separation and functional materials science fields.

A Novel Electrochemical Sensor Modified with a Computer-Simulative Magnetic Ion-Imprinted Membrane for Identification of Uranyl Ion

In this paper, a novel ion-imprinted electrochemical sensor modified with magnetic nanomaterial Fe₃O₄@SiO₂ was established for the high sensitivity and selectivity determination of UO₂²⁺ in the environment. Density functional theory (DFT) was employed to investigate the interaction between templates and binding ligands to screen out suitable functional binding ligand for the reasonable design of the ion imprinted sensors. The MIIP/MCPE (magnetic ion imprinted membrane/magnetic carbon paste electrode) modified with Fe₃O₄@SiO₂ exhibited a strong response current and high sensitivity toward uranyl ion comparison with the bare carbon paste electrodes. Meanwhile, the MCPE was fabricated simultaneously under the action of strong magnetic adsorption, and the ion imprinted membrane can be adsorbed stably on the electrode surface, handling the problem that the imprinted membrane was easy to fall off during the process of experimental determination and elution. Based on the uranyl ion imprinting network, differential pulse voltammetry (DPV) was adopted for the detection technology to realize the electrochemical reduction of uranyl ions, which improved the selectivity of the sensor. Thereafter, uranyl ions were detected in the linear concentration range of 1.0 × 10⁻⁹ mol L⁻¹ to 2.0 × 10⁻⁷ mol L⁻¹, with the detection and quantification limit of 1.08 × 10⁻⁹ and 3.23 × 10⁻¹⁰ mol L⁻¹, respectively. In addition, the sensor was successfully demonstrated for the determination of uranyl ions in uranium tailings soil samples and water samples with a recovery of 95% to 104%.

The Use of Computational Methods for the Development of Molecularly Imprinted Polymers

Recent years have witnessed a dramatic increase in the use of theoretical and computational approaches in the study and development of molecular imprinting systems. These tools are being used to either improve understanding of the mechanisms underlying the function of molecular imprinting systems or for the design of new systems. Here, we present an overview of the literature describing the application of theoretical and computational techniques to the different stages of the molecular imprinting process (pre-polymerization mixture, polymerization process and ligand-molecularly imprinted polymer rebinding), along with an analysis of trends within and the current status of this aspect of the molecular imprinting field.

Theoretical research of molecular imprinted polymers formed from formaldehyde and methacrylic acid

In recent years, with the development of molecular imprinting technology, the imprinting sites, nature of imprinting, selection of functional monomers, cross-linking agents, solvents, and the optimization of the imprinting ratio are all the hot spots of researchers. In this work, the theoretical prediction of the self-assembly system of formaldehyde (HCHO) molecularly imprinted polymer was carried out by the B3LYP/6-31 G(d,p) method. The geometric configuration and active sites of the stable complex of HCHO and methacrylic acid (MAA) were analyzed. The selection of the imprinting ratios, cross-linking agents, and solvents was discussed. The topological properties of electron density of HCHO-MAA complex were considered by using the topological analysis method of chemical bond electron density based on valence bond theory. This study cannot only reveal the relationship between the imprinting mechanism of molecularly imprinted polymers and the molecular structure and properties of molecularly imprinted polymers but also provide valuable reference for the design and preparation of molecularly imprinted polymers.

Rational design, preparation and adsorption study of a magnetic molecularly imprinted polymer using a dummy template and a bifunctional monomer

In this study, a molecular docking method and solvation model in computer simulation were applied to simultaneously screen a dummy template and a bifunctional monomer in the rational design of a magnetic molecularly imprinted polymer.

Theoretical guidance for experimental research of the dicyandiamide and methacrylic acid molecular imprinted polymer

The DCD-MIPs displayed good adsorption properties to DCD, which can be applied to the separation and detection of DCD.

Study on Dicyandiamide-Imprinted Polymers with Computer-Aided Design

With the aid of theoretical calculations, a series of molecularly imprinted polymers (MIPs) were designed and prepared for the recognition of dicyandiamide (DCD) via precipitation polymerization using acetonitrile as the solvent at 333 K. On the basis of the long-range correction method of M062X/6-31G(d,p), we simulated the bonding sites, bonding situations, binding energies, imprinted molar ratios, and the mechanisms of interaction between DCD and the functional monomers. Among acrylamide (AM), N,N’-methylenebisacrylamide (MBA), itaconic acid (IA), and methacrylic acid (MAA), MAA was confirmed as the best functional monomer, because the strongest interaction (the maximum number of hydrogen bonds and the lowest binding energy) occurs between DCD and MAA, when the optimal molar ratios for DCD to the functional monomers were used, respectively. Additionally, pentaerythritol triacrylate (PETA) was confirmed to be the best cross-linker among divinylbenzene (DVB), ethylene glycol dimethacrylate (EGDMA), trimethylolpropane trimethylacrylate (TRIM), and PETA. This is due to the facts that the weakest interaction (the highest binding energy) occurs between PETA and DCD, and the strongest interaction (the lowest binding energy) occurs between PETA and MAA. Depending on the results of theoretical calculations, a series of MIPs were prepared. Among them, the ones prepared using DCD, MAA, and PETA as the template, the functional monomer, and the cross-linker, respectively, exhibited the highest adsorption capacity for DCD. The apparent maximum absorption quantity of DCD on the MIP was 17.45 mg/g.

Recovery and separation of erythromycin from industrial wastewater by imprinted magnetic nanoparticles that exploit β-cyclodextrin as the functional monomer

A type of surface imprinting over magnetic Fe3 O4 nanoparticles utilizing erythromycin-A as a template for use in the separation and recovery of erythromycin was developed and investigated. As the intermolecular forces play a key role in the performance of imprinted materials, differential scanning calorimetry, and (1) H NMR spectroscopy was employed to evaluate the interactions between erythromycin and the functional monomer β-cyclodextrin. To synthesize the surface imprinted polymers, magnetic Fe3 O4 nanoparticles, the core materials, were modified with a free radical initiator to initialize polymerization in a "grafting from" manner. Then using acryloyl-modified β-cyclodextrin as the functional monomer and ethyleneglycol dimethacrylate as the cross-linker, thin erythromycin-imprinted films were fabricated by the radical-induced graft copolymerization of monomers on the surface of the Fe3 O4 nanoparticles. Selectivity experiments showed that the erythromycin-A-imprinted materials had recognition ability toward erythromycin derivatives. Finally, these magnetic molecularly imprinted particles were successfully used for the separation and enrichment of erythromycin from the mother liquor. The recovery, detected by high-performance liquid chromatography and differential pulse voltammetry, approached 97%. The combination of the specific selectivity of the imprinted material and the magnetic separation provided a powerful tool that is simple, flexible, and selective for the separation and recovery of erythromycin.