All-in-one solid-phase microextraction: Development of a selective solid-phase microextraction fiber assembly for the simultaneous and efficient extraction of analytes with different polarities

Supramolecular solvents: a gateway to all-in-one extractions in chemical exposomics

The characterization of the human chemical exposome through daily estimated intakes or biomonitoring has become paramount to understand the causal pathways leading to common diseases. The paradigm shift that has taken place in looking at health has moved research from the classical biomedical model based on "one exposure, one disease" to a more comprehensive approach based on multiple chemicals and low dose effects. For this purpose, untargeted and/or suspect analysis of chemicals based on liquid chromatography and high-resolution mass spectrometry (LC-HRMS) has been proposed as the most relevant strategy for sequencing the exposome. A key aspect in this respect is the development of unbiased sample preparation methods that efficiently concentrate the wide range of untargeted/suspected chemicals while minimizing interference from sample matrices. Here, we aim to critically discuss the potential of tailored supramolecular solvents (SUPRAS) for achieving all-in-one extractions in chemical exposomics, as an alternative to overcome the limitations of the current sample treatment strategies, on the basis of their intrinsic properties and the applications reported so far.

Room-temperature synthesis of dual-functionalized magnetic microporous organic network for efficient extraction of vanillins in food

Microporous organic networks (MONs) are promising materials for the magnetic solid-phase extraction (MSPE) of trace targets from diverse complex samples. However, all the reported magnetic MONs (MMONs) are mono-functionalized and synthesized by refluxing at high temperatures, which is not an energy-efficient and environmentally friendly method. Here, for the first time, we report the room-temperature fabrication of a novel dual-functionalized MMON (MMON-B) for the efficient MSPE of typical vanillin additives from food samples prior to high-performance liquid chromatography (HPLC). The conjugated MMON-B with numerous -OH and -NH₂ groups afforded good extraction for vanillins via π-π, hydrophobic, and hydrogen-bonding interactions. The factors affecting the extraction were studied in detail. Under the optimal conditions, the developed MMON-B-MSPE-HPLC-UV method exhibited wide linear range (0.50-1200 μg L^-1), low limits of detection (0.10-0.15 μg L^-1), and good reusability and stability. Therefore, MMON-B was successfully used to enrich vanillins in complex food samples. The morphology and extraction efficiency of the room-temperature synthesized MMON-B were comparable with those of the MMON-B synthesized via the conventional reflux method, indicating that the room-temperature fabrication method is a good alternative to the reflux method. This study presents the feasibility of using a room-temperature method for synthesizing dual-functionalized MONs, and the findings may significantly promote the application of MONs in the MSPE of trace targets from complex matrices.

QuEChERS sample preparation integrated to dispersive liquid-liquid microextraction based on solidified floating organic droplet for spectrometric determination of sudan dyes: A synergistic approach

In this project, a synergistic approach has been proposed where a quick, easy, cheap, effective, rugged, and safe (QuEChERS) sample preparation technique was developed for the extraction of sudan III and sudan IV dyes in different spices prior to its dispersive liquid-liquid microextraction based on solidified floating organic droplet (DLLME-SFO). Initially, the sample was extracted by QuEChERS method and then preconcentrated through DLLME-SFO followed by spectrophotometric detection. All the experimental parameters i.e., volume of extraction solvent, pH, acetonitrile to water ratio, temperature, centrifugation rate and time, and sample volume were optimized. Limit of detection (LOD) calculated for sudan III and sudan IV were 0.42 and 0.35 mg/L, respectively. Excellent recoveries were obtained in the range of 98.29-99.88%. After validation through standard addition methodology, the developed QuEChERS@DLLME-SFO method was successfully applied to determine sudan (III-IV) dyes in real spices samples. Integration of QuEChERS and DLLME-SFO was found to be a suitable substitute to eliminate the usage of costly primary secondary amines and other sorbents. The synergistic approach of QuEChERS and DLLME-SFO with the aid of UV/visible spectrophotometry makes it prompt, cost effective technique with excellent analytical figures of merit.

Method Validation and Evaluation of Safrole Persistence in Cowpea Beans Using Headspace Solid-Phase Microextraction and Gas Chromatography

Bioinsecticides are regarded as important alternatives for controlling agricultural pests. However, few studies have determined the persistence of these compounds in stored grains. This study aimed at optimizing and validating a fast and effective method for extraction and quantification of residues of safrole (the main component of Piper hispidinervum essential oil) in cowpea beans. It also sought to assess the persistence of this substance in the grains treated by contact and fumigation. The proposed method used headspace solid-phase microextraction (HS-SPME) and gas chromatography with a flame ionization detector (GC/FID). Factors such as temperature, extraction time and type of fiber were assessed to maximize the performance of the extraction technique. The performance of the method was appraised via the parameters selectivity, linearity, limit of detection (LOD), limit of quantification (LOQ), precision, and accuracy. The LOD and LOQ of safrole were 0.0057 and 0.019 μg kg⁻¹, respectively and the determination coefficient (R²) was >0.99. The relative recovery ranged from 99.26 to 104.85, with a coefficient of variation <15%. The validated method was applied to assess the persistence of safrole residue in grains, where concentrations ranged from 1.095 to 0.052 µg kg⁻¹ (contact) and from 2.16 to 0.12 µg kg ⁻¹ (fumigation). The levels measured up from the fifth day represented less than 1% of the initial concentration, proving that safrole have low persistence in cowpea beans, thus being safe for bioinsecticide use. Thus, this work is relevant not only for the extraction method developed, but also for the possible use of a natural insecticide in pest management in stored grains.

Microfluidics for Peptidomics, Proteomics, and Cell Analysis

Microfluidics is the advanced microtechnology of fluid manipulation in channels with at least one dimension in the range of 1-100 microns. Microfluidic technology offers a growing number of tools for manipulating small volumes of fluid to control chemical, biological, and physical processes relevant to separation, analysis, and detection. Currently, microfluidic devices play an important role in many biological, chemical, physical, biotechnological and engineering applications. There are numerous ways to fabricate the necessary microchannels and integrate them into microfluidic platforms. In peptidomics and proteomics, microfluidics is often used in combination with mass spectrometric (MS) analysis. This review provides an overview of using microfluidic systems for peptidomics, proteomics and cell analysis. The application of microfluidics in combination with MS detection and other novel techniques to answer clinical questions is also discussed in the context of disease diagnosis and therapy. Recent developments and applications of capillary and microchip (electro)separation methods in proteomic and peptidomic analysis are summarized. The state of the art of microchip platforms for cell sorting and single-cell analysis is also discussed. Advances in detection methods are reported, and new applications in proteomics and peptidomics, quality control of peptide and protein pharmaceuticals, analysis of proteins and peptides in biomatrices and determination of their physicochemical parameters are highlighted.

Headspace Solid-Phase Microextraction: Validation of the Method and Determination of Allyl Isothiocyanate Persistence in Cowpea Beans

Essential oils are widely recognized as an efficient and safe alternative for controlling pests in foods. However, a few studies have determined the persistence of these compounds in stored grains. The present study optimized and validated a fast and effective method for extraction and quantification of allyl isothiocyanate (AITC-the main component of mustard essential oil) residue in cowpea beans. It also investigated the persistence of this substance in the grains. The proposed method employs headspace solid-phase microextraction (HS-SPME) and gas chromatography with a flame ionization detector (GC/FID). For optimizing it, a central composite design (CCD) was used, where the best conditions for the extraction of the AITC were achieved using 15 min fiber exposure at 30 °C. The performance of the method was assessed by studying selectivity, linearity, limits of detection (LOD) and quantification (LOQ), precision, and accuracy. The LOD and LOQ for AITC were 0.11 and 0.33 μg kg^-1, respectively. The determination coefficient (R ²) was above 0.99. The relative recovery rate ranged from 108.2 to 114.8%, with an interday coefficient of variation below 9%. After 36 h, no residue was detected in the samples, demonstrating that the AITC has low persistence and can be safely used as a bioinsecticide for grains.

Influence of nano-zinc oxide on tropane alkaloid production, h6h gene transcription and antioxidant enzyme activity in Hyoscyamus reticulatus L. hairy roots

The use of nanotechnology and biotechnology to improve the production of plant bioactive compounds is growing. Hyoscyamus reticulatus L. is a major source of tropane alkaloids with a wide therapeutic use, including treatment of Parkinson's disease and to calm schizoid patients. In the present study, hairy roots were obtained from two-week-old cotyledon explants of H. reticulatus L. using the A7 strain of Agrobacterium rhizogenes. The effects of different concentrations of the signaling molecule nano-zinc oxide (ZnO) (0, 50, 100 and 200 mg/L), with three exposure times (24, 48 and 72 h), on the growth rate, antioxidant enzyme activity, total phenol contents (TPC), tropane alkaloid contents and hyoscyamine-6-beta-hydroxylase (h6h) gene expression levels were investigated. Growth curve analysis revealed a decrease in fresh and dry weight of ZnO-treated hairy roots compared to the control. ANOVA results showed that the antioxidant activity of the enzymes catalase, guaiacol peroxidase and ascorbate peroxidase was significantly higher in the ZnO-treated hairy roots than in the control, as was the TPC. The highest levels of hyoscyamine (37%) and scopolamine (37.63%) were obtained in hairy roots treated with 100 mg/L of ZnO after 48 and 72 h, respectively. Semi-quantitative RT-PCR analysis revealed the highest h6h gene expression was in hairy roots treated with 100 mg/L of ZnO after 24 h. It can be concluded that ZnO is as an effective elicitor of tropane alkaloids such as hyoscyamine and scopolamine due to its enhancing effect on expression levels of the biosynthetic h6h gene.

A novel sorbent based on carbon nanotube/amino-functionalized sol-gel for the headspace solid-phase microextraction of α-bisabolol from medicinal plant samples using experimental design

A novel sol-gel coating on a stainless-steel fiber was developed for the first time for the headspace solid-phase microextraction and determination of α-bisabolol with gas chromatography and flame ionization detection. The parameters influencing the efficiency of solid-phase microextraction process, such as extraction time and temperature, pH, and ionic strength, were optimized by the experimental design method. Under optimized conditions, the linear range was between 0.0027 and 100 μg/mL. The relative standard deviations determined at 0.01 and 1.0 μg/mL concentration levels (n = 3), respectively, were as follows: intraday relative standard deviations 3.4 and 3.3%; interday relative standard deviations 5.0 and 4.3%; and fiber-to-fiber relative standard deviations 6.0 and 3.5%. The relative recovery values were 90.3 and 101.4% at 0.01 and 1.0 μg/mL spiking levels, respectively. The proposed method was successfully applied to various real samples containing α-bisabolol.

Sol-gel-adsorbent-coated extraction needles to detect volatile compounds in spoiled fish

Volatile compounds generated by fish spoilage were investigated by an inside-needle microextraction method followed by gas chromatography with flame ionization detection and gas chromatography with mass spectrometry. The inside of a needle was coated with an adsorbent to extract the target analytes from the headspace of the sample. The examined adsorbents included β-cyclodextrin, polystyrene resin cross-linked with 1% divinylbenzene, and polyethylene glycol mixed with polydimethylsiloxane. The investigated volatile compounds generated by fish spoilage were acetone, 2-butanone, 2-butanol, 2-propanol, dimethyl disulfide, acetic acid, and benzaldehyde. The analysis conditions for the sorption and desorption processes were optimized. Each optimized condition was validated by determining the limit of detection and the limit of quantitation from the calibration curves, as well as the recovery, reproducibility, and concentration factors. As a result, all of the fabricated needles afforded successful recoveries, above 90%, with relative standard deviations below 10%. In particular, cyclodextrin and polystyrene resin cross-linked with 1% divinylbenzene mixed with polydimethylsiloxane show good sensitivities and concentration factors for the standard volatile compounds. The storage of fresh mackerel and salted mackerel at room temperature for 14 days caused the concentrations of dimethyl disulfide and acetic acid to significantly increase while those of acetone, 2-butanone, 2-propanol, and 2-butanol changed only slightly.

Enhanced production of hyoscyamine and scopolamine from genetically transformed root culture of Hyoscyamus reticulatus L. elicited by iron oxide nanoparticles

The medicinal plant Hyoscyamus reticulatus L. is a rich source of hyoscyamine and scopolamine, the tropane alkaloids. The use of hairy root cultures has focused significant attention on production of important metabolites such as stable tropane alkaloid production. Elicitation is an effective approach to induce secondary metabolite biosynthetic pathways. Hairy roots were derived from cotyledon explants inoculated with Agrobacterium rhizogenes and elicited by iron oxide nanoparticles (FeNPs) at different concentrations (0, 450, 900, 1800, and 3600 mg L-1) for different exposure times (24, 48, and 72 h). The highest hairy root fresh and dry weights were found in the medium supplemented with 900 mg L-1 FeNPs. Antioxidant enzyme activity was significantly increased in induced hairy roots compared to non-transgenic roots. The highest hyoscyamine and scopolamine production (about fivefold increase over the control) was achieved with 900 and 450 mg L-1 FeNPs at 24 and 48 h of exposure time, respectively. This is the first report of the effect of FeNP elicitor on hairy root cultures of a medicinal plant. We suggest that FeNPs could be an effective elicitor in hairy root cultures in order to increase tropane alkaloid production.

Retention behavior of alkyl-substituted polycyclic aromatic sulfur heterocycle isomers in gas chromatography on stationary phases of different selectivity

Retention indices for 10 sets of alkyl-substituted polycyclic aromatic sulfur heterocycles (PASHs) isomers (total of 80 PASHs) were determined using gas chromatography with three different stationary phases: a 50% phenyl phase, a 50% liquid crystalline dimethylpolysiloxane (LC-DMPS) phase, and an ionic liquid (IL) phase. Correlations between the retention behavior on the three stationary phases and PASH geometry [length-to-breadth (L/B) and thickness (T)] were investigated for the following PASHs: 4 methyl-substituted dibenzothiophenes (DBTs), 3 ethyl-substituted DBTs, 15 dimethyl-substituted DBTs, 8 trimethyl-substituted DBTs, 15 methyl-substituted naphthothiophenes, 30 methyl-substituted benzonaphthothiophenes, and 5 methyl-substituted tetrapheno[1,12-bcd]thiophene. Correlation coefficients for retention on the 50% phenyl phase vs L/B ranged from r=-0.28 (MeBbN23Ts) to r=0.92 (EtDBTs). Correlation coefficients for retention on the IL phase vs L/B ranged from r=0.13 (MeN12Ts) to r=0.83 (EtDBTs). Correlation coefficients for retention on the 50% LC-DMPS phase vs L/B ranged from r=0.22 (MeDBTs) to r=0.84 (TriMeDBTs).

Analysis of proteins and peptides by electromigration methods in microchips

This review presents the developments and applications of microchip electromigration methods in the separation and analysis of peptides and proteins in the period 2011-mid-2016. The developments in sample preparation and preconcentration, microchannel material, and surface treatment are described. Separations by various microchip electromigration methods (zone electrophoresis in free and sieving media, affinity electrophoresis, isotachophoresis, isoelectric focusing, electrokinetic chromatography, and electrochromatography) are demonstrated. Advances in detection methods are reported and novel applications in the areas of proteomics and peptidomics, quality control of peptide and protein pharmaceuticals, analysis of proteins and peptides in biomatrices, and determination of physicochemical parameters are shown.

Multivariate analysis of the volatile components in tobacco based on infrared-assisted extraction coupled to headspace solid-phase microextraction and gas chromatography-mass spectrometry

A novel infrared-assisted extraction coupled to headspace solid-phase microextraction followed by gas chromatography with mass spectrometry method has been developed for the rapid determination of the volatile components in tobacco. The optimal extraction conditions for maximizing the extraction efficiency were as follows: 65 μm polydimethylsiloxane-divinylbenzene fiber, extraction time of 20 min, infrared power of 175 W, and distance between the infrared lamp and the headspace vial of 2 cm. Under the optimum conditions, 50 components were found to exist in all ten tobacco samples from different geographical origins. Compared with conventional water-bath heating and nonheating extraction methods, the extraction efficiency of infrared-assisted extraction was greatly improved. Furthermore, multivariate analysis including principal component analysis, hierarchical cluster analysis, and similarity analysis were performed to evaluate the chemical information of these samples and divided them into three classifications, including rich, moderate, and fresh flavors. The above-mentioned classification results were consistent with the sensory evaluation, which was pivotal and meaningful for tobacco discrimination. As a simple, fast, cost-effective, and highly efficient method, the infrared-assisted extraction coupled to headspace solid-phase microextraction technique is powerful and promising for distinguishing the geographical origins of the tobacco samples coupled to suitable chemometrics.