Optimization of multiwalled carbon nanotubes reinforced hollow-fiber solid-liquid-phase microextraction for the determination of polycyclic aromatic hydrocarbons in environmental water samples using experimental design

Hierarchical porous zeolitic imidazolate framework‑8 supported hollow-fiber liquid-phase microextraction of nine typical phenolic pollutants in water samples followed by electrophoretic analysis

Hierarchical porous zeolitic imidazolate framework‑8 (HpZIF-8) have not only good chemical and thermal stability, but also pore structures of different sizes. In this work, HpZIF-8 supported hollow-fiber liquid-phase microextraction (HpZIF-8@HF-LPME) co-modified with tributyl phosphate and 2-nitroethyl benzene was firstly developed for purification and enrichment of nine typical phenolic pollutants followed by electrophoretic separation and amperometric detection (CE-AD). The key enrichment parameters were optimized by full factorial experimental and central composite designs. Under the optimum conditions, the maximum enrichment factors for the nine analytes were 479 (phenol), 249 (2-chlorophenol), 821 (4-chlorophenol), 1253 (3-methylphenol), 1376 (2,4-dichlorophenol), 1078 (2,4,6-trichlorophenol), 200 (pentachlorophenol), 614 (4-nitrophenol) and1827 times (bisphenol A), respectively. The limits of detection were 0.060-1.5 µg L-1 (S/N = 3) in real sample matrixes. This proposed method has been successfully applied to water samples with high ionic strength, and the average recoveries were in the range of 80.2-118.0%. This developed method of HpZIF-8@HF-LPME/CE-AD needs no desorption and derivatization, providing an alternative for monitoring typical phenolic pollutants in water samples.

Simple, selective, and identifiable analysis of aromatic monoamines with a surrogate on sulfuric acid impregnated filters by derivatization with an acid chloride reagent and HPLC with fluorescence detection

A simple and selective derivatization and detection method for o-toluidine, o-anisidine, and 2,4-dimethylaniline was developed using a sulfuric acid impregnated filter, 4-(N-chloroformylmethyl-N-methylamino)-7-nitro-2,1,3-benzoxadiazole, and a surrogate (o-ethylaniline), which allowed simple, rapid, selective, and identifiable analysis by high-performance liquid chromatography with fluorescence detection. These amines were successfully derivatized in a pH 5 buffer solution containing acetonitrile at 35°C for 10 min (linear in the range 0-400 ng/mL, n = 5, aromatic amines: r > 0.9980, aromatic amines with surrogate correction: r > 0.9997, aromatic amines in the presence of phenol and aliphatic amines with surrogate correction: r > 0.9996). The retention times of these derivatized aromatic amines were <17 min using isocratic elution. No derivatives corresponding to phenol or the aliphatic amines (i.e., cyclohexylamine and hexylamine) were detected in the reaction solution. This method can therefore be considered applicable for the analysis of samples from occupational environments, as samples were successfully extracted, derivatized, and measured by high-performance liquid chromatography following spiking of a sulfuric acid impregnated filter with aromatic amines, phenols, and aliphatic amines. Indeed, only the aromatic amines were quantitatively detected without pretreatment, with no other spiked compounds being detected.