Quality by design (QbD) approach to develop fast-dissolving tablets using melt-dispersion paired with surface-adsorption method: formulation and pharmacokinetics of flurbiprofen melt-dispersion granules

Developing amorphous solid dispersions with good flow properties is always challenging for formulation scientists to convert into tablets. Hence, the present study investigates the impact of the combination of melt-dispersion and surface-adsorption methods to prepare melt-dispersion granules with enhanced dissolution rate and flow properties. This study covers the formulation and pharmacokinetic study of fast-dissolving flurbiprofen tablets using PEG 6000 (hydrophilic carrier) and lactose (adsorbent). Response surface methodology (RSM) using the central composite design (CCD) was used to optimize independent variables like carrier concentrations and adsorbent concentrations, and their interactions with the dependent variables (responses), including solubility, angle of repose, Carr's index, and cumulative % drug release, were investigated. The optimized formulation was selected based on the numerical optimization method and further investigated for FTIR spectroscopy, differential scanning calorimetry, and X-ray diffractometry. Then, the optimized formulation was compressed into tablets and evaluated for both in vitro dissolution and in vivo pharmacokinetics parameters. In vitro dissolution studies revealed that the prepared fast-dissolving tablets released the drug entirely within 15 min (Q15 of F4 tablets: 99.34 ± 1.24%), whereas conventional tablets took around 60 min for complete dissolution. Pharmacokinetic studies in rats revealed that fast-dissolving tablets showed 1.38-fold higher peak-plasma concentration (Cmax) and 1.39-fold higher bioavailability than conventional tablets. Overall, this study revealed the successful fabrication of fast-dissolving tablets via melt-dispersion paired with the surface-adsorption method to enhance the flow properties and the dissolution rate.

A Chemometric Strategy in the Development of a RP-UPLC Method for the Quantitative Resolution of a Two-Component Syrup Formulation

A novel chemometric strategy was implemented in the development of a new ultraperformance liquid chromatography method for the quantitative estimation of guaifenesin and pseudoephedrine hydrochloride in a two-component syrup formulation with minimal experimental effort, time and reagent. A full factorial design with three factors was investigated to find optimal working conditions of chromatographic factors (column temperature, flow rate, and 0.1 M H3PO4% in mobile phase) that affect the chromatographic separation. Then, optimum experimental conditions providing adequate separation of the analyzed drug substances within the short runtime were determined. Under optimal experimental conditions, the retention times for guaifenesin and pseudoephedrine hydrochloride were obtained as 0.817 and 1.430 min, respectively. In the optimized RP-UPLC method, chromatographic response was reported as a linear function of concentration between 5.0 and 80.0 μg/mL for guaifenesin and 10.0-90.0 μg/mL for pseudoephedrine hydrochloride. The proposed method was carefully validated and successfully applied to quality control and analysis of a cough syrup preparation containing guaifenesin and pseudoephedrine hydrochloride. Consequently, the proposed reversed-phase ultraperformance liquid chromatography method provided an opportunity to quantify relevant drugs with small amount of reagents and short runtime.

Optimization of Meloxicam Solid Dispersion Formulations for Dissolution Enhancement and Storage Stability Using 33 Full Factorial Design Based on Response Surface Methodology

This study aimed to formulate and optimize solid-dispersion of meloxicam (MX) employing response-surface-methodology (RSM). RSM allowed identification of the main effects and interactions between studied factors on MX dissolution and acceleration of the optimization process. 3³ full factorial design with 27 different formulations was proposed. Effects of drug loading percentage (A), carriers' ratio (B), method of preparation (C), and their interactions on percent MX dissolved after 10 and 30 min (Q_10min & Q_30min) from fresh and stored samples were studied in distilled water. The considered levels were 2.5%, 5.0%, and 7.5% (factor A), three ratios of Soluplus®/Poloxamer-407 (factor B). Physical mixture (PM), fusion method (FM), and hot-melt-extrusion (HME) were considered factor (C). Stability studies were carried out for 3 months under stress conditions. The proposed optimization design was validated by 3-extra checkpoints formulations. The optimized formulation was selected via numerical optimization and investigated by DSC, XRD, PLM, and in vitro dissolution study. Results showed that HME technique gave the highest MX dissolution rate compared to other techniques (FM & PM). At constant level of factor (C), the amount of MX dissolved increased by decreasing MX loading and increasing Soluplus in carriers' ratio. Actual responses of the optimized formulation were in close consistency with predicted data. Amorphous form of MX in the optimized formulation was proved by DSC, XRD, and PLM. Selected factors and their levels of the optimization design were significantly valuable for demonstrating and adapting the expected formulation characteristics for rapid dissolution of MX (Q_10min= 89.09%) from fresh and stored samples.

Two-Pronged Anti-Tumor Therapy by a New Polymer-Paclitaxel Conjugate Micelle with an Anti-Multidrug Resistance Effect

Introduction

Cancerous tumors are still a major disease that threatens human life, with tumor multidrug resistance (MDR) being one of the main reasons for the failure of chemotherapy. Thus, reversing tumor MDR has become a research focus of medical scientists.

Methods

Here, a reduction-sensitive polymer prodrug micelle, mPEG-DCA-SS-PTX (PDSP), was manufactured with a new polymer inhibitor of drug resistance as a carrier to overcome MDR and improve the anti-tumor effect of PTX.

Results

The PDSP micelles display good stability, double-responsive drug release, and excellent biocompatibility. The PDSP micelles reduced the cytotoxicity of PTX to normal HL-7702 cells and enhanced that to SMMC-7721 and MCF-7 cells in vitro. Improved sensitivity of A549/ADR to PDSP was also observed in vitro. Furthermore, in vivo experiments show reduced systemic toxicity and enhanced therapeutic efficacy of PTX to H22 subcutaneous tumor-bearing mice.

Conclusion

This work proves that the reduction-sensitive polymer prodrug micelles carried by the new polymer inhibitor can be used as an alternative delivery system to target tumors and reverse MDR for paclitaxel and other tumor-resistant drugs.

Interpol review of controlled substances 2016-2019

This review paper covers the forensic-relevant literature in controlled substances from 2016 to 2019 as a part of the 19th Interpol International Forensic Science Managers Symposium. The review papers are also available at the Interpol website at: https://www.interpol.int/content/download/14458/file/Interpol%20Review%20Papers%202019.pdf.

Optimization of gliclazide loaded alginate-gelatin beads employing central composite design

Objective: The aim of this study was to optimize the formulation of alginate-gelatin (AL-GL) beads containing gliclazide (GLZ) employing design of experiments (DOE).Significance: DOE enabled identification of the interaction between the studied factors, deep understanding of GLZ release pattern and acceleration of the optimization process.Methods: A three-factor, three-level face centered design was employed. The effects of GLZ content (GLZ%, X₁), polymer ratio (AL:GL ratio, X₂), crosslinker concentration (glutaraldehyde, GA%, X₃), and their interaction on incorporation efficiency (IE) and release rate were studied. The optimized formulation was prepared using numerical optimization and evaluated by DSC, FT-IR, SEM and release rate studies.Results: Increasing GA% (X₃) decreased IE (Y₁) with the highest magnitude of effect among the studied factors. On the other hand, increasing alginate content in AL:GL ratio (X₂) increased IE (Y₁). The amount of GLZ released Q_0.5h, Q_2h(pH 1.2) and Q_4h(pH 7.4) decreased by increasing GLZ% (X₁) and AL:GL ratio (X₂). Both drug content and AL:GL ratio appeared to affect water penetration into the gel matrix and drug release. Generally, there was a direct relationship between GA% (X₃) and GLZ release in pH 1.2 (Q_0.5h and Q_2h). However, in pH 7.4 (Q_4h), increasing GA% decreased GLZ release. In addition, increasing GA% caused deviation from zero-order release model. The actual responses of the optimized formulation were in close agreement with the predicted ones.Conclusion: The selected factors and their levels studied in the optimization design were useful for tailoring the anticipated formulation characteristics and GLZ release pattern.

Simultaneous quantitative assessment of nine glycosides in tobacco by liquid chromatography-tandem mass spectrometry

A simple and efficient method combining ultrasound-assisted extraction, the conditions of which were optimized by response surface methodology, with liquid chromatography and tandem mass spectrometry was established and validated for the absolute quantification of nine non-volatile neutral glycosides originating from tobacco (Nicotiana tobaccum L.) leaves, comprising three phenolic glycosides, one benzanoid glycoside, and five sesquiterpene glycosides within three isomers, originating from tobacco leaves. Factors of extraction time, sample quantity, extraction solvent, liquid chromatographic conditions, and electrospray ionization parameters were carefully investigated to ensure the selectivity and sensitivity of the method. All calibration curves showed excellent coefficients of determination ranging from 0.9940 to 0.9996, within the range of tested concentrations. The limits of detection and quantification were 2.33-25.9 and 7.06-78.5 ng/mL, respectively. Satisfactory values of accuracy were between 80.1 to 107.9% among different sample matrixes. The relative standard deviations of intra- and inter-day analysis were less than 13.7 and 13.0% respectively. The developed method was successfully applied in a pilot study to determine the amounts of the nine endogenous glycosides in real flue-cured tobacco samples obtained from different habitats in China.