An iron-based metal-organic framework as a novel dispersive solid-phase extraction sorbent for the efficient adsorption of tetrabromobisphenol A from environmental water samples

For environmental safety, it is important to establish a simple, rapid, and sensitive method for emerging pollutants. Here, a dispersive solid-phase extraction (d-SPE) method based on an iron-based metal-organic framework (Fe-MIL-88-NH₂) combined with high-performance liquid chromatography (HPLC) was developed for tetrabromobisphenol A (TBBPA) in water samples. Fe-MIL-88-NH₂ was synthesized using a solvothermal method and completely characterized. Fe-MIL-88-NH₂ had good water stability and gave a maximum adsorption capacity of 40.97 mg g^-1 for TBBPA. The adsorption of TBBPA on Fe-MIL-88-NH₂ followed Langmuir adsorption models and a pseudo-second-order kinetic model. The bromine ion and the hydroxyl group of TBBPA could form strong hydrogen bond interactions with the amino protons around the cavity of Fe-MIL-88-NH₂, which was in accord with the molecular simulation calculations. Furthermore, several important d-SPE parameters were optimized, such as the amount of materials, extraction time, pH, ionic strength, elution solvent type, and volume. The established method showed good linearity in the concentration range of 0.005-100 μg g^-1 (r² ≥ 0.9996). This method's limits of detection (LOD) and quantification (LOQ) were 0.001 μg g^-1 and 0.005 μg g^-1, respectively. The recoveries in spiked water samples ranged from 87.5% to 104.9%. The proposed method was applied successfully to detect TBBPA in environmental water samples.

Determination of phenols in natural and waste waters by capillary electrophoresis after preconcentration on magnetic nanoparticles coated with aminated hypercrosslinked polystyrene

An efficient sorbent for magnetic solid-phase extraction was developed from Fe₃ O₄ nanoparticles covered with aminated hypercrosslinked polystyrene. The sorbent has a saturation magnetization of 47 emu/g and a surface area of 509 mg/g and was tested for the extraction of 11 phenols from aqueous media. The optimum conditions were as follows: pH 3; adsorbent mass, 20.0 mg; adsorption time, 30 min; eluent (acetone) volume, 0.5 mL; and desorption time, 5 min. The enrichment factor after desorption reached 1595-1716 and the maximum adsorption capacity was 501-909 mg/g. Capillary electrophoresis was applied successively to separate 11 phenols after solid-phase extraction. The best separation was achieved using a fused silica capillary and borate buffer (pH 10.7) as a supporting electrolyte. After optimization, the linearity range was from 0.2 to 950 μg/L, and the limits of detection were 0.05-0.2 μg/L. The relative standard deviation varied from 6.1 to 8.7% (C = 1 μg/L) and from 2.9 to 3.5% (C = 500 μg/L). The determination of phenols is complicated in eutrophic water and spring water with a high content of humic and fulvic acids.

Simultaneous enrichment and determination of cadmium and mercury ions using magnetic PAMAM dendrimers as the adsorbents for magnetic solid phase extraction coupled with high performance liquid chromatography

In present study, a sensitive and efficient method based on magnetic PAMAM dendrimers as the sorbents for magnetic solid-phase extraction (MSPE) coupled with high performance liquid-phase chromatography and ultraviolet variable wavelength detector (HPLC-VWD) was developed for simultaneous determination of trace cadmium and mercury ions. Sodium diethyldithiocarbamate (DDTC-Na) was used as the chelating agent during the elution process. Parameters that would affect the extraction efficiency including PAMAM generation, adsorbent dosage, adsorption time, elution time and volume, pH and coexisting ions were investigated to achieve the best adsorption efficiency. Under the optimal conditions, good linear relationship was obtained in the range of 0.05-200 μg L^-1 for Cd²⁺ and 0.1-200 μg L^-1 for Hg²⁺, and the limits of detection were 0.016 and 0.040 μg L^-1, respectively. The spiked recoveries of Cd²⁺ and Hg²⁺ were satisfied in the range of 91.5-105% (n = 3). The proposed method was proved to be an alternative and reliable method to determine trace Cd²⁺ and Hg²⁺ in water samples.

Polyamidoamine dendrimer decorated nanoparticles as an adsorbent for magnetic solid-phase extraction of tetrabromobisphenol A and 4-nonylphenol from environmental water samples

Polyamidoamine dendrimer decorated Fe₃O₄ magnetic nanoparticles were successfully synthesized by Michael addition with methyl acrylate and amidation with ethylenediamine. The decorated magnetic particles were utilized as an effective adsorbent for magnetic solid-phase extraction of tetrabromobisphenol A and 4-nonylphenol at trace levels from environmental water samples. A number of parameters such as generation number, ionic strength, adsorbent dosage, eluent, adsorption time, elution volume, elution time, pH, humic acid and sample volume were optimized. Under the optimal conditions, a wide linearity was achieved in the range of 0.1-500 μg L^-1 of the analytes with the correlation coefficients (R²) of 0.9985-0.9995. The limits of detection were approximately 0.011 μg L^-1 of tetrabromobisphenol A and 0.017 μg L^-1 of 4-nonylphenol. Satisfactory average recoveries of the analytes ranged from 93.2% to 101.1%. The results indicated that the decorated magnetic nanoparticles can be suitable for extraction of phenols from environmental water samples. The proposed method was sensitive, effective, practical and robust for the determination of tetrabromobisphenol A and 4-nonylphenol in environmental water samples.