Electrochemical preparation of zinc oxide/polypyrrole nanocomposite coating for the highly effective solid-phase microextraction of phthalate esters

Study on the Rapid Preparation of Zinc Oxide Nanotubes by Galvanostatic Etching

At present, most of the methods for preparing ZnO nanotubes are chemical etching of ZnO nanorods, which is inefficient and takes a long time. In this paper, ZnO nanotubes were successfully prepared by galvanostatic etching. Nanotubes prepared by galvanostatic etching only took 1/6 of the time of chemical etching. The ZnO nanotubes obtained by two different methods were tested by XRD and SEM. It is found that the crystal structure and crystallinity of the ZnO nanotubes obtained by galvanostatic etching are unchanged, and the internal corrosion of the nanotubes by galvanostatic etching is more thorough and has a larger specific surface area. In the tests of UV-vis spectrophotometry, fluorescence spectra and electrochemical performance test, the optical properties and electrochemical performance of ZnO nanotubes obtained by galvanostatic etching are better than those obtained by chemical etching. Because the ZnO nanotubes obtained by galvanostatic etching have larger specific surface area, better optical properties and better electrochemical performance, they have a greater application prospect in sensors and ultraviolet light detectors.

High-efficiency solid-phase microextraction performance of polypyrrole enhanced titania nanoparticles for sensitive determination of polar chlorophenols and triclosan in environmental water samples

In this work, a polypyrrole (PPy)/TiO₂ nanocomposite coating was fabricated by the direct electropolymerization of pyrrole on annealed TiO₂ nanoparticles and evaluated as a novel direct immersion solid phase microextraction (DI-SPME) fiber coating for extraction of trace amounts of pollutants in environmental water samples. The functionalized fiber is mechanically and chemically stable, and can be easily prepared in a highly reproducible manner. The effects of the pyrrole monomer concentration, polymerization voltage and polymerization time on the fiber were discussed. Surface morphological and compositional analyses revealed that the composite coating of nano polypyrrole and titanium dioxide nanoparticles (TiO₂NP_s) uniformly doped the Ti substrate. The as-fabricated fiber exhibited good extraction capability for phenolic compounds in combination with high performance liquid chromatography-UV detection (HPLC-UV). At the optimum SPME conditions, the calibration curves were linear (R² ≥ 0.9965). LODs and LOQs of less than 0.026 μg L⁻¹ and 0.09 μg L⁻¹ , respectively, were achieved, and RSDs were in the range 3.5–7.2%. The results obtained in this work suggest that PPy/TiO₂ is a promising coating material for future applications of SPME and related sample preparation techniques.

A PPy/TiO₂ nanocomposite coating was fabricated by direct electropolymerization of pyrrole on annealed TiO₂ nanoparticles and evaluated as a novel direct immersion solid phase microextraction fiber coating for the extraction of trace pollutants in water.

Selective and efficient solid-phase microextraction of polycyclic aromatic hydrocarbons in water by robust two-dimensional zinc oxide nanosheets grown on a superelastic nickel-titanium alloy fiber prior to determination by HPLC-UV

Oriented zinc oxide nanosheets (ZnONSs) were directly grown on pretreated nickel-titanium alloy (NiTi) fiber substrates without a traditional seeding layer of ZnO by electrochemical deposition for the first time. The fiber coatings were characterized by scanning electron microscopy and energy dispersive X-ray spectrometry. Direct growth of ZnONSs on the NiTi fiber substrate was dependent on the type of zinc salt. The adsorption performance of the ZnONSs coatings was evaluated using representative aromatic compounds as model analytes together with high performance liquid chromatography with ultraviolet detection. The as-prepared fiber shows higher extraction capability for the selected polycyclic aromatic hydrocarbons (PAHs) than for ultraviolet filters in water samples, and better extraction selectivity for PAHs. For this purpose, the important experimental parameters were optimized for the extraction of PAHs. Under the optimized conditions, the calibration curves are linear in the range of 0.03-200 μg L-1 with correlation coefficients greater than 0.999. Limits of detection ranged from 0.011 μg L-1 to 0.082 μg L-1. Intra-day and inter-day relative standard deviations (RSDs) of the developed method with a single fiber ranged from 2.69% to 4.18% and from 4.44% to 5.40%, respectively. RSDs for the fiber-to-fiber reproducibility varied between 5.57% and 7.66%. The developed method was successfully applied for selective preconcentration and determination of trace PAHs in five real water samples. Relative recoveries varied from 84.5% to 104% with RSDs between 1.65% and 8.30%. Furthermore, the as-prepared fiber is highly stable.