Urinary l -kynurenine quantification and selective extraction through a molecularly imprinted solid-phase extraction device

Disposable Molecularly Imprinted Polymer-Modified Screen-Printed Electrodes for Rapid Electrochemical Detection of l-Kynurenine in Human Urine

l-Kynurenine (l-Kyn) is an endogenous metabolite produced in the catabolic route of l-Tryptophan (l-Trp), and it is a potential biomarker of several immunological disorders. Thus, the development of a fast and cheap technology for the specific detection of l-Kyn in biological fluids is of great relevance, especially considering its recent correlation with SARS-CoV-2 disease progression. Herein, a disposable screen-printed electrode based on a molecularly imprinted polymer (MIP) has been constructed: the o-Phenylenediamine monomer, in the presence of l-Kyn as a template with a molar ratio of monomer/template of 1/4, has been electropolymerized on the surface of a screen-printed carbon electrode (SPCE). The optimized kyn-MIP-SPCE has been characterized via cyclic voltammetry (CV), using [Fe(CN)6)]3-/4- as a redox probe and a scanning electron microscopy (SEM) technique. After the optimization of various experimental parameters, such as the number of CV electropolymerization cycles, urine pretreatment, electrochemical measurement method and incubation period, l-Kyn has been detected in standard solutions via square wave voltammetry (SWV) with a linear range between 10 and 100 μM (R2 = 0.9924). The MIP-SPCE device allowed l-Kyn detection in human urine in a linear range of 10-1000 μM (R2 = 0.9902) with LOD and LOQ values of 1.5 and 5 µM, respectively. Finally, a high selectivity factor α (5.1) was calculated for l-Kyn toward l-Trp. Moreover, the Imprinting Factor obtained for l-Kyn was about seventeen times higher than the IF calculated for l-Trp. The developed disposable sensing system demonstrated its potential application in the biomedical field.

Advances in kynurenine analysis

Kynurenine, the first product of tryptophan degradation via the kynurenine pathway, has become one of the most frequently mentioned biomarkers in recent years. Its levels in the body indicate the state of the human physiology. Human serum and plasma are the main matrixes used to evaluate kynurenine levels and liquid chromatography is the dominant technique for its determination. However, their concentrations in blood do not always correspond to the levels in other matrixes obtained from the affected individuals. It is therefore important to decide when it is appropriate to analyse kynurenine in alternative matrices. However, liquid chromatography may not be the best option for the analysis. This review presents alternatives that can be used and summarizes the features that need to be considered prior to kynurenine determination. Possible approaches to kynurenine analysis in a variety of human matrixes, their challenges, and limitations are critically discussed.

The biological interactions between kynurenine and AhR in melanocytes: in vitro studies

Kynurenine (KYN), a tryptophan metabolite, is endogenously produced by the skin cells and is present in human sweat. The aim of this study was to determine the molecular mechanism of the antiproliferative activity of KYN on human epidermal melanocytes. KYN significantly inhibited the metabolic activity of HEMa cells by decreasing cyclin D1 and cyclin-dependent kinase 4 (CDK4) levels via the aryl hydrocarbon receptor (AhR) pathway. The results suggested that KYN might be involved in the regulation of physiological and pathological processes mediated by melanocytes.

Raclopride-Molecularly Imprinted Polymers: A Promising Technology for Selective [11C]Raclopride Purification

In this work, we developed a novel approach to purify [¹¹C]Raclopride ([¹¹C]RAC), an important positron emission tomography radiotracer, based on tailored shape-recognition polymers, with the aim to substitute single-pass HPLC purification with an in-flow trap & release process. Molecular imprinting technology (MIT) applied to solid phase extraction (MISPE) was investigated to develop a setting able to selectively extract [¹¹C]RAC in a mixture containing a high amount of its precursor, (S)-O-Des-Methyl-Raclopride (DM-RAC). Two imprinted polymers selective for unlabeled RAC and DM-RAC were synthesized through a radical polymerization at 65 °C using methacrylic acid and trimethylolpropane trimethacrylate in the presence of template molecule (RAC or DM-RAC). The prepared polymer was characterized by scanning electron microscopy and Fourier transform infrared spectroscopy and tested in MISPE experiments. The polymers were used in testing conditions, revealing a high retention capacity of RAC-MISPE to retain RAC either in the presence of similar concentrations of RAC and DM-RAC precursor (96.9%, RSD 6.6%) and in the presence of a large excess of precursor (90%, RSD 4.6%) in the loading solution. Starting from these promising results, preliminary studies for selective purification of [¹¹C]Raclopride using this RAC-MISPE were performed and, while generally confirming the selectivity capacity of the polymer, revealed challenging applicability to the current synthetic process, mainly due to high backpressures and long elution times.

Highly sensitive sensing device based on highly luminescent lanthanide nanocluster for biomarker in human urine and serum

The level of L-kynurenine (L-kyn) can reflect the health state of human body, and the determination of L-kyn can be used for the medical diagnosis of several cancers and neurological diseases. In this work, a series of air-, water-, and thermo-stable dinuclear lanthanide nanoclusters [Ln₂(2,5-DFBA)₆(phen)₂] (Tb 1, Eu 2, Gd 3, 2,5-DFBA = 2,5-difluorobenzoic acid, phen = 1,10-phenanthroline) are obtained by a facial method. 1 and 2 show very high luminescence quantum yields (QYs) of 71.7% and 81.8%, respectively. Interestingly, investigation reveals that 1 is a quick, highly sensitive and selective sensor for L-kyn in real samples of urine and serum. Furthermore, transmission electron microscope (TEM) results reveal that nanocluster 1 is stable in solution and can be uniform distributed on the base, suggesting it can be deposited on various supports to fabricate sensing devices. Thus, 1 is fabricated into a sensitive test paper for the eye-readable detection of L-kyn in real samples of human urine and serum. The limit of detection (LOD) as low as 0.3 μM, which is enough to rapidly determine L-kyn in human body liquor (usually 5 μM in healthy human body).

Highly ordered molecularly imprinted mesoporous silica for selective removal of bisphenol A from wastewater

Selective removal of bisphenol A from wastewater is quite challenging primarily because of its low concentration and matrix complexity. To this end, according to the molecular structure of bisphenol A, we designed a functional monomer for the preparation of molecularly imprinted mesoporous silica using click chemistry reaction. The resultant bisphenol A imprinted mesoporous silica was characterized by transmission electron microscopy, small angle X-ray diffraction, and N₂ adsorption-desorption experiments. The results indicated that the bisphenol A imprinted mesoporous silica possessed a highly ordered periodic hexagonal mesostructure with the Brunauer-Emmett-Teller surface area of 944.28 m² /g. The bisphenol A imprinted mesoporous silica showed fast adsorption kinetics and the saturated adsorption capacity reached up to 88.6 mg/g at pH 6.5, and with relative selectivity factors ranged from 1.06 to 3.20. The adsorption efficiency of the bisphenol A imprinted mesoporous silica was above 97.96% after five extraction/elution cycles. The bisphenol A imprinted mesoporous silica was further applied to the selective removal of bisphenol A from real wastewater samples and showed great promise in practical applications.

Molecularly imprinted polymer solid-phase extraction of synthetic cathinones from urine and whole blood samples

In forensic drug analysis, extractive pretreatment is required prior to instrumental analysis to ensure successful detection of the target compounds. However, conventional extraction methods such as hydrophilic polymer-based solid-phase extraction and liquid-liquid extraction are unsuitable for an emerging class of new psychoactive substances, namely, synthetic cathinones, because they exhibit a lack of class selectivity and increased risk of target analyte decomposition during extraction. To address these issues, we describe a highly class-selective sample clean-up method for the extraction of synthetic cathinones from urine and whole blood samples, exploiting a molecularly imprinted polymer solid-phase extraction cartridge. In terms of the influence of the synthetic cathinone molecular structure on the extraction recovery, we showed that while longer alkyl side chains slightly reduced the extraction efficiency, substituent variation on the aromatic ring exerted no effect. Molecularly imprinted polymer solid-phase extraction of 11 synthetic cathinones from urine samples yielded higher recoveries than the two conventional extraction methods, and smaller matrix effect was observed than that with hydrophilic polymer-based solid-phase extraction. Molecularly imprinted polymer solid-phase extraction from whole blood samples gave recoveries comparable to those of urine samples. Therefore, the proposed method is applicable for the extraction and quantitative determination of synthetic cathinones in biological samples.