Metal-Organic Frameworks in Agriculture

Agrochemicals, which are crucial to meet the world food qualitative and quantitative demand, are compounds used to kill pests (insects, fungi, rodents, or unwanted plants). Regrettably, there are some important issues associated with their widespread and extensive use (e.g., contamination, bioaccumulation, and development of pest resistance); thus, a reduced and more controlled use of agrochemicals and thorough detection in food, water, soil, and fields are necessary. In this regard, the development of new functional materials for the efficient application, detection, and removal of agrochemicals is a priority. Metal-organic frameworks (MOFs) with exceptional sorptive, recognition capabilities, and catalytical properties have very recently shown their potential in agriculture. This Review emphasizes the recent advances in the use of MOFs in agriculture through three main views: environmental remediation, controlled agrochemical release, and detection of agrochemicals.

A simple, environmental-friendly and reliable d-SPE method using amino-containing metal-organic framework MIL-125-NH2 to determine pesticide residues in pomelo samples from different localities

A simple, environmentally-friendly and reliable method was developed to simultaneously monitor the residue of methyl 1-naphthalene acetate, parathion-methyl, fenitrothion, bromophos and phenthoate in pomelo by using dispersive solid-phase extraction technique (d-SPE). In this method, these target analytes were captured by MIL-125-NH₂ and detected by GC-MS/MS. The key parameters of d-SPE were optimized by the single factor experiment. Under the optimized conditions, a good determination coefficient (R² > 0.9922) and extraction recoveries (64.7-116.8%) are obtained. The limit of detections (0.03-1.07 ng/g) is lower than the MRLs in citrus fruits established by EU (10-15000 ng/g) and China (10-10000 ng/g). The precisions of intra-day and inter-day are 1.3-8.9% and 3.8-14.9%, respectively. In addition, the sorbent MIL-125-NH₂ is stable and can be reused at least eight times. These results prove the established method is efficient and reliable to detect the pesticide residues in pomelo.

Stable dual-emissive fluorescin@UiO-67 metal-organic frameworks for visual and ratiometric sensing of Al3+ and ascorbic acid

Encapsulation of fluorophore in metal organic framework (MOF) is an effective method to construct multi-emissive composites. Unfortunately, the small molecules loaded in MOF pores are easy to leak. To overcome this difficulty, fluorescin (FL) is proposed to be encapsulated tightly in the cage of the small tetrahedron of UiO-67, as one of the organic ligands coordinated with the central ion Zr. Finally, stable multi-emission fluorescence was successfully achieved, and Förster resonance energy transfer (FRET) occurred between FL and UiO-67. Ascorbic acid (AA) can dynamically quench the fluorescence of FL@UiO-67 nanoclusters (NCs) through internal filtering effect, photoinduced electron transfer (PET). The detection limit of the probe for AA was as low as 0.20 μM, and the detection range was 0.67 μM-0.36 mM. The probe was further employed to detect Al³⁺ due to the coordination between Al³⁺ and the carboxyl group in the FL@UiO-67 NCs. The detection limit for Al³⁺ was 3.3 nM, and the linear range was 11 nM-5 μM agarose film and test paper were both prepared successfully for visual detection of AA and Al³⁺. This work provides new ideas for low-cost and convenient real-time detection method.

Preparation of a zirconium terephthalate metal-organic framework coated magnetic nanoparticle for the extraction of berberine prior to high-performance liquid chromatography analysis

In this study, a zirconium terephthalate metal-organic framework-coated magnetic nanoparticle (UiO-66@PA@PEI@Fe₃ O₄ ) was synthesized for the extraction of berberine prior to high-performance liquid chromatography analysis. The phytic acid, which could be grafted onto the magnetic nanoparticle through electrostatic interaction with the abundant amino groups of polyethylenimine, possesses outstanding metal ion coordination ability for the immobilization of metal-organic frameworks UiO-66. The physicochemical properties of the obtained nanoparticle were thoroughly investigated by a series of characterization techniques. Then, the factors that will affect the extraction efficiency and recovery of berberine were investigated. Results indicated that the material had good stability and reusability, and high adsorption capacity (50.01 mg/g) to berberine through single-layer adsorption. In addition, a molecular docking study indicated that the interactions between the material and berberine were mainly π-π stacking and hydrophobic interaction. Finally, the material was successfully applied to the extraction of berberine in Rhizoma Coptidis and Cortex Phellodendri extracts with the recoveries of 76.1% and 71.6%, respectively.

Dispersive solid-phase extraction using microporous metal-organic framework UiO-66: Improving the matrix compounds removal for assaying pesticide residues in organic and conventional vegetables

An efficient dispersive solid-phase extraction method was developed to trace pesticide residues in commonly consumed vegetables. In this method, UiO-66 with uniform micropores was used as sorbent, and gas chromatography-mass spectrometry was applied to detect the pesticides. Thanks to the size sieving action of uniform micropores, UiO-66 directly extracted the target pesticides from vegetable matrices and excluded the relatively large matrix compounds. This well eliminated the matrix effect. The important experimental conditions were evaluated by orthogonal array experimental design. In optimized conditions, good linearity (R² ≥ 0.99), detection limits (0.4-2.0 ng/g), recoveries (60.9-117.5%) and precision (relativestandarddeviations < 14.6%) were achieved. Moreover, the sorbent UiO-66 can be reused more than 20 times. These demonstrate a simple, reliable and robust method to screen the pesticide residues in vegetables. Furthermore, the validated method was applied to detect the pesticides in various organic and conventional vegetables.

Metal-organic framework for the extraction and detection of pesticides from food commodities

Pesticide residues in food matrices, threatening the survival and development of humanity, is one of the critical challenges worldwide. Metal-organic frameworks (MOFs) possess excellent properties, which include excellent adsorption capacity, tailorable shape and size, hierarchical structure, numerous surface-active sites, high specific surface areas, high chemical stabilities, and ease of modification and functionalization. These promising properties render MOFs as advantageous porous materials for the extraction and detection of pesticides in food samples. This review is based on a brief introduction of MOFs and highlights recent advances in pesticide extraction and detection through MOFs. Furthermore, the challenges and prospects in this field are also described.

Batch and packed bed techniques for adsorptive aqueous phase removal of selected phenoxyacetic acid herbicide using sugar industry waste ash

Batch and packed bed adsorption of 4-chloro-2-methylphenoxyacetic acid (MCPA) herbicide was performed using bagasse fly ash (BFA) as an adsorbent. In batch process, characteristics of adsorbent, and the influence of adsorbent dosage, initial herbicide concentration, time, pH, particle size of adsorbent and temperature on adsorption were studied. Results disclose higher removal of MCPA on bigger particles of BFA owing to higher specific surface area because of greater carbon and lesser silica percentage in bigger particles. Application of isotherm models in present study indicates the best fitting of Langmuir and Temkin isotherms whereas the kinetic models suggest the suitability of pseudo second order and Elovich models. Thermodynamic study specifies the temperature preferred adsorption process. In packed bed technique, the effect of influent concentration, flow rate and bed height were investigated. The deactivation kinetic model which was previously considered only for studies in gas-solid adsorption is applied in this study to solid-liquid adsorption along with conventional packed bed models. In packed bed study, Bohart-Adams and Wolborska models are appropriate to explain the experimental data upto 60% saturation of the column. The deactivation kinetic model is found the best to elucidate the nature of breakthrough curves till the complete saturation of column. Batch capacity and packed bed capacity per m2 specific surface area of BFA is found about two and three times greater than the previously used adsorbents for MCPA respectively.

Zr-MOF modified cotton fiber for pipette tip solid-phase extraction of four phenoxy herbicides in complex samples

Phenoxy herbicides are widely applied in agricultural weeding. The determination of herbicides is important in environmental protection, agricultural production, food safety, and public health. In this study, a facile and efficient analytical method was proposed for the trace detection of phenoxy herbicides in soil, cucumber, and tap water samples by coupling pipette tip solid phase extraction (PT-SPE) with high performance liquid chromatography. UiO-66-funtionalized cotton (Cotton@UiO-66) was packed into pipette-tip as sorbent to fabricate extraction device. The modification of UiO-66 on cotton fiber was confirmed using scanning electron microscope, Fourier transform infrared spectroscopy, and X-ray diffraction. The main factors affecting the adsorption of Cotton@UiO-66 for four phenoxy herbicides were evaluated by response surface methodology in detail. Under optimized conditions, Cotton@UiO-66 displayed excellent properties in the extraction of phenoxy herbicides with good peak shape. Linear ranges of 4-chlorophenoxyacetic acid, dicamba, 2,4-dichlorophenoxyacetic acid, and 2-(2,4-dichlorophenoxy) propionic acid were 1.4-72 μg/L, 5.6-280 μg/L, 2.8-140 μg/L and 3.2-160 μg/L (RSDs < 6.3%), respectively. The recoveries were between 83.3 and 106.8% with RSDs <6.7%, with detection limits ranging from 0.1 μg/L to 0.3 μg/L. The results show that Cotton@UiO-66 in PT-SPE is an effective method for monitoring phenoxy herbicides in complex samples.

Three-dimensional chitosan/graphene oxide aerogel for high-efficiency solid-phase extraction of acidic herbicides in vegetables

A simple, facile method was adopted to synthesize three-dimensional chitosan grafted graphene oxide aerogel modified silica (3D CS/GOA@Sil) as an eco-friendly, sustainable extraction material for the preconcentration of phenoxy acid herbicides.

Solid-phase extraction of phenoxyacetic acid herbicides in complex samples with a zirconium(IV)-based metal-organic framework

A zirconium(IV)-based metal-organic framework material (MOF-808) has been synthesized in a simple way and used for the extraction of phenoxyacetic acids in complex samples. The material has good thermal and chemical stability, large specific surface area (905.36 m²/g), and high pore size (22.18 Å). Besides, it contains a large amount of Zr-O groups, easy-to-form Zr-O-H bond with carboxyl groups of phenoxyacetic acids, and possesses biphenyl skeleton structure, easy to interact with compounds through π-π and hydrophobic interactions. These characteristics make the material very suitable for the extraction of certain compounds with a high extraction efficiency and excellent selectivity. The extraction conditions were optimized, and then an analytical method was successfully established and applied for analysis of actual samples. The solid-phase extraction method based on prepared material had a wide linear range of 0.2-250 μg/L and a low detection limit of 0.1-0.5 μg/L for four phenoxyacetic acid compounds including 2,4-dichlorophenoxyacetic acid, 2-(2,4-dichlorophenoxy) propionic acid, 4-chlorophenoxyacetic acid, and dicamba. The relative standard deviations of intra- and interday precision were 1.8-3.8 and 4.3-6.9%, and the recoveries after spiking were between 77.1 and 109.3%. The results showed that the material is a desired substituent for the extraction of compounds with benzene ring structure containing carboxyl groups.

Ce-doped UiO-67 nanocrystals with improved adsorption property for removal of organic dyes

In this study, we report the synthesis of Ce-doped UiO-67 nanocrystals via one-step hydrothermal method and their potential use for waste water treatment to remove organic dyes. The as-prepared samples were characterized by using SEM, TEM, FT-IR, XRD, XPS and TG techniques and the results demonstrate the formation of the framework structure of the Ce-doped UiO-67. The adsorption study of the material shows that the Ce-doped UiO-67 nanoparticles preferentially adsorb the cationic dyes such as rhodamine B and malachite green rather than the anionic dyes such as methyl orange. Adsorption capacities are 754.4, 589.2 and 191.6 mg g⁻¹ for rhodamine B, malachite green and methyl orange respectively. Based on its zeta potential and adsorption isotherm, it is understood that Ce doping increases its electrostatic interactions, and as a consequence, improves the adsorption capacity for cationic dyes. In addition, it is found that a pseudo-second-order kinetics and the Langmuir isothermal model were suitable for describing the adsorption behavior of cationic dyes onto the Ce-doped UiO-67.

The Ce-doped UiO-67 nanocrystals were successfully synthesized via a one-step hydrothermal method. Ce doping increases the negative charge on the surface of the material, thus the adsorbent exhibits high adsorption capacity to cationic dyes.