Tetra-proline-modified calix[4]arene-bonded silica stationary phase for simultaneous reversed-phase/hydrophilic interaction mixed-mode chromatography

Hydrophobic/hydrophilic separation performance evaluation of a mixed-mode ionic liquid embedded stearyl thioglycolate functionalized silica stationary phase

In this work, a novel imidazolium ionic liquid embedded multifunctional chromatographic stationary phase (Sil-AVI-ST) was synthesized by the radical-mediated thiol-ene click reaction. A wide range of samples including hydrophilic sulfonamides, vitamins and nucleosides/bases as well as hydrophobic phthalates, bisphenols, alkylphenols and steroid hormones were selected to evaluate the separation ability of the newly obtained Sil-AVI-ST. As expected, an efficient separation of the above tested analytes was successfully achieved in different chromatographic modes. It was proved that multiple stationary phase-analyte interaction forces promoted the selective separation. The Sil-AVI-ST column provided multiple retention mechanisms, enabling the efficient separation of diverse analytes with different polarity. More importantly, embedding a polar ligand (1-allyl-3-vinyl-imidazolium) could improve the separation efficiency of long-chain alkyl bonded stationary phases for hydrophilic analytes, and the developed Sil-AVI-ST column could also realize the detection of hydrophobic analytes under water-rich conditions, which is impossible for the conventional hydrophobic columns. Therefore, the newly prepared Sil-AVI-ST stationary phase has a good practical application potential.

Silica microparticles modified with ionic liquid bonded chitosan as hydrophilic moieties for preparation of high-performance liquid chromatographic stationary phases

Two novel stationary phases, 1-(4-bromobutyl)-3-methylimidazolium bromide bonded chitosan modified silica and 1-(4-bromobutyl)-3-methylimidazolium bromide bonded chitosan derivatized calix[4]arene modified silica stationary phase, were synthesized using 1-(4-bromobutyl)-3-methylimidazolium bromide bonding chitosan as a polarity regulator solving the limitation of the strong hydrophobicity of calixarene in the application of hydrophilic field. The resulting materials were characterized by solid-state nuclear magnetic resonance, Fourier-transform infrared spectra, scanning electron microscopy, elemental analysis, and thermogravimetric analysis. Based on the hydrophilicity endowed by 1-(4-bromobutyl)-3-methylimidazolium bromide bonded chitosan, the retention mode of ILC-Sil and ILCC4-Sil could be effectively switched from the hydrophilic mode to a hydrophilic/hydrophobic mixed mode and could simultaneously provide various interactions with solutes, including hydrophilic, π-π, ion-exchange, inclusion, hydrophobic, and electrostatic interactions. On the basis of these interactions, successful separation and higher shape selectivity were achieved among compounds that vary in polarity under both reverse-phase and hydrophilic interactive liquid chromatography conditions. Moreover, the ILCC4-Sil was successfully applied to the determination of morphine in actual samples using solid-phase extraction and mass spectrometry. The LOD and LOQ were 15 pg/mL and 54 pg/mL, respectively. This work presents an exceptionally flexible adjustment strategy for the retention and selectivity of a silica stationary phase by tuning the modification group.

A New Capillary Gas Chromatography Column Based on Poly(ethylene glycol) Methyl Ether-Functionalized Calix[4]arene

In this work, a novel capillary column (C4A-mPEG) with a calixarene-based polymer stationary phase (poly(ethylene glycol) methyl ether-functionalized 4-tert-butylcalix[4]arene) was designed and used for gas chromatographic (GC) separations. The C4A-mPEG capillary column, prepared by the static coating method, showed moderate polarity and a column efficiency of 2332 plates/m, determined by 1-octanol at 120 °C. The separation features of C4A-mPEG stationary phase, resulting from its unique structure and multiple molecular recognition processes with analytes, including π-π, H-bonding, dipole-dipole, and van der Waals interactions, allowed to obtain high-resolution performances for a wide range of compounds and their isomers, especially benzaldehydes, phenols, and anilines. Moreover, compared with 4-tertbutyl calix[4]arene (C4A) and polyethylene glycol (PEG) stationary phases, a higher resolving capability was also observed for the separation of toluidine and xylidine isomers.

Simultaneous separation of atenolol enantiomers and its acid/alkaline degradation impurities on mixed-mode chiral ligand exchange stationary phases

Simultaneous separation of the enantiomer and impurities is a huge challenge for the quality control of the chiral drug. In this work, mixed-mode chiral ligand exchange stationary phases (CSPs) modified by octyl and sulfhydryl ligands were prepared by vapor deposition and click chemistry methods. Qualitative and quantitative determination of the prepared CSPs were achieved by Fourier transform infrared spectroscopy, solid-state ¹³ C CP/MAS NMR, and elemental analysis. The chiral resolution of CSPs was investigated through a comprehensively chromatographic evaluation of various racemates. Besides, the thermodynamic experiment was carried out to elucidate the contribution of hydrophobic ligand to the improvement of chiral recognition and selectivity. Atenolol and its degradation products were analyzed on the synthesized CSPs and compared with the commercial chiral column. A good separation of atenolol enantiomers from its acid and alkaline degradation impurities was simultaneously achieved on the C₈ /L-Hypro CSP. This new CSP is expected to have more applications in the quality control of other chiral drugs.

Preparation of two amide-bonded stationary phases and comparative evaluation under mixed-mode chromatography

In this work, the conventional reactions were used to functionalize the silica surface with amide and hydrocarbon chain groups affording two different mixed-mode stationary phases (Sil-amide-C11 and Sil-C12-amide). The prepared stationary phases were analyzed by elemental analysis and thermogravimetric analysis. The retention of benzene, phenol, pyridine, and aniline was investigated and compared with synthesized and commercial columns, and this led to prove the existence of different interactions on the synthesized stationary phases. The mixed-mode stationary phases showed multiple interactions, and different chromatography modes were found under distinct chromatographic conditions. According to the type of amide group (either free or within the hydrocarbon chain), different interactions can be made on the columns. The alkylbenzenes and polycyclic aromatic hydrocarbons, as nonpolar hydrocarbons, were chromatographed under reversed-phase liquid chromatography modes, in which amide groups on the silica could efficiently separate polar analytes under hydrophilic interaction liquid chromatography mode in both prepared stationary phases. The performance of the columns was compared by the separation of the carboxylic acid group and biological samples. The bonding method and the type of amide group showed different interactions leading to different separation and performance.

Adjusting the chromatographic properties of poly(ionic liquid)-modified stationary phases by substitution on the imidazolium cation

Poly(ionic liquid)-modified stationary phases can have multiple interactions with solutes. However, in most stationary phases, separation selectivity is adjusted by changing the poly(ionic liquid) anions. In this work, two poly(ionic liquid)-modified silica stationary phases were prepared by introducing the cyano or tetrazolyl group on the pendant imidazolium cation on the polymer chains. Various analytes were selected to investigate their mechanism of retention in the stationary phases using different mobile phases. Two poly(ionic liquid)-modified stationary phases can provide various interactions toward solutes. Compared to the cyano-functionalized poly(ionic liquid) stationary phase, the tetrazolyl-functionalized poly(ionic liquid) stationary phase provides additional cation-exchange and π-π interactions, resulting in different separation selectivity toward analytes. Finally, applicability of the developed stationary phases was demonstrated by the efficient separation of nonsteroidal anti-inflammatory drugs.

Preparation and evaluation of biselector bonded-type multifunctional chiral stationary phase based on dialdehyde cellulose and 6-monodeoxy-6-monoamino-β-cyclodextrine derivatives

A novel biselector bonded-type multifunctional chiral stationary phase (MCSP) was prepared by covalently crosslinking dialdehyde cellulose (DAC) with 6-monodeoxy-6-monoamino-β-cyclodextrine (CD) via Schiff base reaction. The biselector bonded-type MCSP had good chiral and achiral chromatographic performance in normal phase (NP) and reversed phase (RP) modes. Seven and eight enantiomers were successfully separated on the prepared biselector bonded-type MCSP in NP and RP modes, respectively. The biselector bonded-type MCSP showed enhanced chiral resolution ability compared with single selector chiral stationary phases due to the simultaneous introduction of DAC and 6-monodeoxy-6-monoamino-β-CD on the surface of silica gel. Aromatic compounds including polycyclic aromatic hydrocarbons, anilines, phenols, phenylates, and aromatic acids were choosed as analytes to investigate the achiral chromatographic performance of the biselector bonded-type MCSP in NP and RP modes. Chromatographic evaluation results showed that the above aromatic compounds were essentially capable of achieving baseline separation by hydrophobic interaction, π-π interaction, and π-π electron-donor-acceptor interaction. Moreover, the host-guest inclusion effect of 6-monodeoxy-6-monoamino-β-CD and the multiple interactions made the biselector bonded-type MCSP have good steric selectivity. The preparation method of the biselector bonded-type MCSP was simple and provided a new idea and strategy for the preparation of the subsequent novel biselector MCSP.