On‐line synergistic stacking in capillary zone electrophoresis featuring field‐amplified sample stacking and micelle to cyclodextrin stacking in the determination of two alkaloids in complicated matrix samples

Advancements in Multiple-Step On-Line Preconcentration Techniques for Enhanced Sensitivity in Capillary Electrophoresis

Multiple-step on-line preconcentration, a combination of at least two stacking techniques has been developed to increase the sensitivity in capillary electrophoresis (CE) for analytes in various samples. It is usually conducted sequentially, or in some cases, synergistically, where different stacking modes occur simultaneously. Multiple-step techniques allow simultaneous preconcentration and separation of various kinds of analytes in different complex samples in a single CE run. This review aims to provide recent advances in multiple-step on-line preconcentration techniques in CE. We critically review technical papers published for the last 7 years up until July 2024, subsequently organized according to the combination of the main stacking techniques, that is, field amplification, large volume sample stacking, transient isotachophoresis, micelle to solvent or micelle to cyclodextrin stacking, and others. The procedures, fundamental mechanism, analytical figures of merits achieved, and their feasibility for complicated sample matrices are reviewed.

A simple and green offline-online capillary electrophoresis stacking strategy for the simultaneous determination of hydrophobic compounds in complicated samples using sodium dodecyl sulfate as the solubilizer and pseudophase

BACKGROUND

Capillary electrophoresis is a powerful analytical method featured with high separation efficiency, minimal sample requirements, and reduced organic solvents consumption. However, its low sensitivity hinders its wide application in determination of trace analytes especially for the weakly ionized hydrophobic compounds. Offline and Online capillary electrophoresis stacking methods are more favored to enhance detection sensitivity of analytes. The determination of two sesquiterpenes and an alkaloid from the dried root of Lindera aggregata merged as an example for developing a simple, sensitive and green method for the simultaneous determination of two hydrophobic compounds in complicated matrix samples.

RESULTS

An offline-online capillary electrophoresis stacking strategy by integrating micro matrix solid phase dispersion with field-amplified sample stacking and micelle to cyclodextrin stacking has been developed for the simultaneous determination of dehydrocostus lactone, linderane, norisoboldine in complex matrices. The optimized parameters were set at 65 mM sodium dihydrogen phosphate, 35 % methanol, 180 s for sample injection and 210 s for cyclodextrin injection, 20 mM sodium dodecyl sulfate of sample matrix for online stacking; 1:1 sample to MCM-48, 180 s grinding time, and 1000 μL of 20 mM sodium dodecyl sulfate elution for offline procedure. Under the optimum conditions, the method showed good linearity with correlation coefficients (R2 ≥ 0.9927), low limits of detection within the range of 25-50 ng mL-1, satisfactory repeatability and reproducibility below 3.98 %, and acceptable recoveries between 94 % and 97 %. The developed method was successfully applied to two real samples, the root of L. aggregata and rat feces.

SIGNIFICANCE

Sodium dodecyl sulfate is firstly used as an eluent in micro matrix solid phase dispersion and plays a dual role throughout the analytical procedure, including extraction solvent in sample preparation and micelle pseudophase during online stacking. It brings great procedure convenience to the method. The sensitivity of this method can improve up to 1283-folds compared with the normal mode. Moreover, the overall strategy indicates satisfied green potential evaluated by greenness assessment tools.

Micelle to cyclodextrin stacking in open-tubular liquid chromatography using capillaries coated with surfactant admicelles

In-line sample concentration by micelle to cyclodextrin stacking (MCDS) in open-tubular liquid chromatography (OT-LC) with UV detection is described. OT-LC of two sets of analytes (small-molecule drugs and neutral alkenylbenzenes) was by the use of a fused-silica capillary that was coated with admicelles of didodecyldimethyl ammonium bromide (DDAB). These admicelles acted as a stationary chromatographic pseudophase. The mobile phase was 25 mM sodium tetraborate in 10% methanol, pH 9.2. MCDS was by long pressure injection of samples prepared in 10 mM hexadecyltrimethyl ammonium bromide (CTAB) in 25 mM sodium tetraborate, pH 9.2 (buffer), followed by injection of 50 mM α-CD in buffer (CD solution). Stacking was by application of voltage at -20 kV prior to pressure-driven OT-LC. The factors that influenced MCDS such as type and concentration of CD, concentration of CTAB in the sample, injection time ratio of the sample and the CD solution and stacking time were studied. Under optimised conditions, sensitivity enhancement factors (SEFs) were between 19 and 23, linear ranges were between 0.5 and 10 µg/mL with r² > 0.99 and inter-day/intra-day repeatability in retention time and peak area were ≤5.6% for the model small-molecule drugs. Application to real samples was by the determination of potentially toxic alkenylbenzenes (SEFs = 10 to 12) in basil-leaf and whole-clove extracts. The assay results were comparable to those obtained from an in-house high-performance liquid chromatography-UV method.

Online preconcentration of lysozyme in hen egg white using responsive polymer coating in CE

A mixed polymer brushes material based on poly (2-methyl-2-oxazoline)- and poly (acrylic acid)-coated capillary with switchable protein adsorption/desorption properties was applied for online preconcentration of lysozyme in hen egg white during capillary electrophoresis performance. First, lysozyme in simulated egg white was successfully online preconcentrated and the detection signal of lysozyme was amplified. Ovalbumin, ovomucoid, and conalbumin in egg white were verified show negligible interference on the online preconcentration of lysozyme according to the study on electroosmotic flow mobility. Second, a series validation procedure was carried out to evaluate the proposed method performance. There was a good linearity behavior range from 0.1 to 5.0 ng/mL, limit of detection was 20 pg/mL, and limit of quantity was 50 pg/mL, the accuracy and robustness of this method were also excellent. Last, the proposed method has been successfully used to detect and analyze lysozyme in hen egg white, the determined amounts of lysozyme in hen egg white were consistent with reported normal levels and recoveries were in the range of 96.0-99.2%. After 75 consecutive runs, this prepared capillary was still stable for online preconcentration and determination of lysozyme in hen egg white without being affected by complex matrix.

A simple and efficient sequential electrokinetic and hydrodynamic injections in micellar electrokinetic chromatography method for quantification of anticancer drug 5-fluorouracil and its metabolite in human plasma

A simple and sensitive preconcentration strategy using sequential electrokinetic and hydrodynamic injection modes in micellar electrokinetic chromatography with diode array detection was developed and applied for the separation and determination of anticancer agent, 5-fluorouracil and its metabolite, 5-fluoro-2'-deoxyuridine, in human plasma. Sequential injection modes with increased analyte loading capacity using the anionic pseudo-stationary phase facilitated collection of the dispersed neutral and charged analytes into narrow zones and improved sensitivity. Several important parameters affecting sample enrichment performance were evaluated and optimized in this study. Under the optimized experimental conditions, 614- and 643-fold and 782- and 803-fold sensitivity improvement were obtained for 5-fluorouracil and its metabolite when compared with normal hydrodynamic and electrokinetic injection, respectively. The method has good linearity (1-1,000 ng/ml) with acceptable coefficient of determination (r²  > 0.993), low limits of detection (0.11-0.14 ng/ml) and satisfactory analyte relative recovery (97.4-99.7%) with relative standard deviations of 4.6-9.3% (n = 6). Validation results as well as the application to analysis of human plasma samples from cancer patients demonstrate the applicability of the proposed method to clinical studies.

Electroanalysis based on stand-alone matrices and electrode-modifying films with silica sol-gel frameworks: a review

Silica sol-gel matrices and its organically modified analogues that contain aqueous electrolytes, ionic liquids, or other ionic conductors constitute stand-alone solid-state electrochemical cells when hosting electrodes or serve as modifying films on working electrodes in conventional cells. These materials facilitate a wide variety of analytical applications and are employed in various designs of power sources. In this review, analytical applications are the focus. Solid-state cells that serve as gas sensors, including in chromatographic detectors of gas-phase analytes, are described. Sol-gel films that modify working electrodes to perform functions such as hosting electrochemical catalysts and acting as size-exclusion moieties that protect the electrode from passivation by adsorption of macromolecules are discussed with emphasis on pore size, structure, and orientation. Silica sol-gel chemistry has been studied extensively; thus, factors that control its general properties as frameworks for solid-state cells and for thin films on the working electrode are well characterized. Here, recent advances such as the use of dendrimers and of nanoscale beads in conjunction with electrochemically assisted deposition of silica to template pore size and distribution are emphasized. Related topics include replacing aqueous solutions as the internal electrolyte with room-temperature ionic liquids, using the sol-gel as an anchor for functional groups and modifying electrodes with silica-based composites.

Field-amplified sample injection in capillary zone electrophoresis for the pharmacokinetic research of trace risperidone and its major metabolite 9-hydroxyrisperidone in beagle dogs

This article describes a method for the simultaneous quantitation of risperidone and its major metabolite, 9-hydroxyrisperidone, in beagle dog plasma by field-amplified sample injection in capillary zone electrophoresis. The separation was carried out at 25°C in a 48 cm × 75 µm fused-silica capillary with an applied voltage of 20 kV using 60 mM NaH₂ PO₄ buffer (pH 3.6). The detection wavelength was 280 nm. Clean-up and preconcentration of plasma samples were conducted by 96-well formatted liquid-liquid extraction. In this study, this stacking technique provided a sensitivity enhancement of approximately 158 to 188 fold compared with the same sample without stacking. The method was suitably validated with respect to stability, specificity, linearity, lower limit of quantitation, accuracy, precision, and extraction recovery. Calibration curves exhibited good linearity (r²  > 0.995) over a wide concentration range of 2.5 to 200 ng/mL for both risperidone and 9-hydroxyrisperidone. The intra- and interday precisions at the three quality control levels were less than 11.40%. The intra- and interday accuracies ranged from 87.90 to 107.17% for risperidone and from 88.43 to 105.92% for 9-hydroxyrisperidone. All validation data were within the required limits. In conclusion, the method developed was successfully applied to pharmacokinetic studies of risperidone and 9-hydroxyrisperidone in beagle dogs.