Fabrication of glucose-derived carbon-decorated magnetic microspheres for extraction of bisphenols from water and tea drinks

Biochar/sodium alginate mixed matrix membrane as adsorbent for in-syringe solid-phase extraction towards trace nitroimidazoles in water samples prior to ultra-high-performance liquid chromatography-tandem mass spectrometry analysis

In the present work, the herb (Poria cocos (Schw.) Wolf) residue, as an environmentally friendly and renewable biomass source, was converted into novel biochar. Biochar/sodium alginate mixed matrix membrane was fabricated. On this basis, a biochar/sodium alginate mixed matrix membrane-based in-syringe solid-phase extraction was developed combined with ultra-high performance liquid chromatography-tandem mass spectrometry to determine nitroimidazoles in water samples. The factors including times of exaction, type, and volume of elution solvent, and sample solution pH were thoroughly optimized. Then the correlation coefficient was 0.9995-0.9997. The limit of detection of four analytes was between 0.006 and 0.014 ng/mL, and the recovery was between 79.02% and 99.1%. Consequently, the established method would provide a new perspective on monitoring nitroimidazoles in water samples.

Capillary electrophoresis-mass spectrometry analysis of bisphenol A and its analogues in bottled tea beverages with dynamic pH focusing

A simple and sensitive method for the determination of bisphenol A and its analogues at the ng/mL level in bottled tea beverages is presented. This method utilized a dynamic pH junction to focus the analyte into a more concentrated zone, based on the electrophoretic mobility difference of analytes in the sample matrix and background electrolytes in capillary electrophoresis coupled to mass spectrometry (CE-MS). The optimised analyte focusing led to enhanced signal detection with average peak heights for five bisphenols of 53-170 folds higher than conventional injections. Under optimised conditions, the method showed good linearity in the range of 0.1-100 ng/mL, excellent limits of detection (0.03-0.04 ng/mL), good analyte recovery (80.3-118.1%) with acceptable relative standard deviations (<12%). The limits of quantifications were below the maximum permissible content of bisphenol A set by the European Commission for this product. This method was used to quantitatively analyse bisphenols in six different kinds of bottled tea beverages, making it a promising tool for practical applications.

Biomass magnetic porous carbon prepared from mangosteen shell for the preconcentration of 3 bisphenols from beverages followed by liquid chromatographyquadrupoleorbitrap high-resolution mass spectrometry determination

Natural biomass magnetic porous carbon was successfully prepared via a cost-effective and green route using mangosteen shell as raw material. The prepared magnetic porous carbon was used as a magnetic solid phase extraction adsorbent for bisphenols enrichment from beverages followed by high-performance liquid chromatographyquadrupole Orbitrap high-resolution mass spectrometry. Parameters affecting extraction efficiency including sample solutionpH, adsorbent amount, extraction time, eluent type and volume were optimized. Results showed that biomass magnetic porous carbon had excellent adsorption properties for bisphenols due to its large specific surface area and abundant functional groups, which could form hydrogen bonding and π-π stacking with bisphenols. The enrichment factor of 3 bisphenolswere in the range of15∼19. Under optimum conditions, favorable linearity for all analytes was obtained with correlation coefficients higher than 0.998. Recoveries of spiked samples were in the range of 88.5%∼105.1% with relative standard deviation of 3.4%∼5.5%. These results demonstrated thatmagnetic porous carbon may be a promising adsorbent for enrichment of aromatic compounds. This article is protected by copyright. All rights reserved.

Hierarchically Porous Hydrothermal Carbon Microspheres Supported N-Hydroxyphthalimide as a Green and Recyclable Catalyst for Selective Aerobic Oxidation of Alcohols

A novel metal-free, reusable, and green catalytic system comprising hydrothermal carbon microspheres (HCMSs) supporting N-hydroxyphthalimide (NHPI) was developed and employed in the aerobic oxidation of alcohol. Hierarchically porous HCMSs with good monodispersity were produced by the hydrothermal carbonization of sucrose and designed NaOH-impregnated calcination under a static air atmosphere. The meso- and macroporous pores on HCMSs make up 71% of the total pore volume. The covalent immobilization of NHPI onto HCMSs was first accomplished by grafting hyperbranched polyquaternary amine via repetitive ring-opening reactions of diglycidyl ether and subsequent amidation with 4-carboxy-NHPI. Owing to the cocatalysis of grafted quaternary ammonium salt, a designed heterogeneous catalyst has superior performance to free NHPI in the oxidation of 2-phenylethanol. The established catalytic system achieved 42% conversion and up to 96% selectivity of acetophenone at 90 °C under 1 atm O₂ for 20 h and presented a versatile catalytic effect for diversified alcohols. Immobilized NHPI could be facilely recycled via simple filtration and displayed good stability for six cycles without a discernible decrease of reactivity or damage of catalyst morphology in repeated oxidation test.