Particle packed mixed-mode chromatographic stationary phase for the separation of peptide in liquid chromatography

Preparation of two zwitterionic polymer functionalized stationary phases and comparative evaluation under mixed-mode of reversed phase/ hydrophilic interaction/ion exchange chromatography

Zwitterions are a promising choice to prepare separation materials because of their hydrophilicity and biocompatibility. We described the preparation of two zwitterionic polymer functionalized stationary phases and evaluation under mixed-mode chromatography. A zwitterionic monomer, S-(4-vinylbenzyl) cysteine (SVC), was synthesized and bonded to silica via reversible addition fragmentation chain transfer (RAFT) polymerization to afford a zwitterionic stationary phase, Sil-SVC. A hydrophobic monomer, N-(4-phenylbutan-2-yl) acrylamide (NPA), was copolymerized with SVC onto the stationary phase (Sil-SVCNPA) for comparison. The stationary phases were characterized with FT-IR, TGA, EA, and zeta-potential measurements. Mobile phase composition (ACN content, pH and salt concentration) was varied to study the retention property. Linear solvation energy relationship and Van't Hoff plot were used to investigate the retention mechanism and how chromatographic conditions influenced it. Both stationary phases showed a mixed-mode of RPLC/HILIC/IEC and satisfactory performance in separating hydrophobic analytes (alkylbenzenes and polycyclic aromatic hydrocarbons), hydrophilic nucleotide and bases, and anions, high column efficiency of 60,000 plates·m-1 was achieved. In summary, zwitterionic polymers are attractive options to prepare stationary phases and the retention property can be easily regulated by copolymer.

Synthesis, column packing and liquid chromatography of molecularly imprinted polymers for the acid black 1, acid black 210, and acid Brown 703 dyes

Molecularly imprinted polymers have been synthesized for the acid black 1, acid black 210, and acid brown 703 dyes using methacrylic acid, ethylene glycol, and azobisisobutyronitrile as the monomer, cross-linker, and initiator, respectively, in the ratio of 1 : 10 : 44 (template:monomer:cross-linker). The MIPs were used for the selective removal of their corresponding dyes. The selective nature of the MIPs towards their respective dyes was confirmed by a homemade liquid chromatography system. The resultant polymer materials were packed in a stainless steel column and checked for the separation of mixtures of dyes in liquid chromatography. The dyes complementary in structure to the imprinted cavities in the MIPs had long retention times, showing the highly selective nature of the MIPs. The pH, quantity of the MIPs, time, and concentration of the dyes were optimized for the highly efficient removal of the newly synthesized MIP adsorbents in batch adsorption studies. First-order, second-order, and intra-particle diffusion models were applied to all the three MIP-based adsorbents for their kinetic investigations towards the dyes. All the three MIPs selectively absorbed their target template molecule in the presence of four other template dyes having closely related structures with % RSD < 4% for the three batch experiments. The synthesized MIPs were characterized by FTIR, SEM imaging and liquid chromatography. FTIR results strongly confirmed the presence of hydrogen bonding interactions (600–900) between the template and the individual monomers present in the unwashed MIPs. Liquid chromatography revealed the highly selective nature of the MIPs towards their template molecules. The synthesized polymeric substances possess excellent thermal, chemical, and mechanical stability and can be reused several hundred times. The MIPs were applied in the removal of dyes from spiked water samples (river water, tap water and distilled water) where the % removal of the dyes by their corresponding MIPs was greater than 90%.

MIP synthesis for the recently emerging dyes, a new method for their characterization in liquid chromatography by packing packing the MIP particles in a stainless steel column, and their application in environmental remediation.

Preparation of mixed-mode stationary phase for separation of peptides and proteins in high performance liquid chromatography

Porous silica particles were prepared by sol–gel method with some modification to get wide-pore particles. These particles were derivatized with N-phenylmaleimide-methylvinylisocyanate (PMI) and styrene by reversible addition fragmentation chain transfer (RAFT) polymerization to prepare N-phenylmaleimide embedded polystyrene (PMP) stationary phases. Narrow bore stainless steel column (100 × 1.8 mm i.d) was packed by slurry packing method. The chromatographic performance of PMP column was evaluated for the separation of synthetic peptides mixture composed of five peptides (Gly-Tyr, Gly-Leu-Tyr, Gly-Gly-Tyr-Arg, Tyr-Ile-Gly-Ser-Arg, Leucine enkephalin) and tryptic digest of human serum albumin (HAS) respectively. Number of theoretical plates as high as 280,000 plates/m were obtained for peptides mixture at optimum elution condition. Separation performance of the developed column was compared with commercial Ascentis Express RP-Amide column and it was observed that separation performance of PMP column was better than commercial column in terms of separation efficiency and resolution.

Mixed-mode open tubular column for peptide separations by capillary electrochromatography

Mixed-mode chromatography open tubular column has been developed for peptide separation in electrochromatography. A column with 92 cm effective length and 50 μm internal diameter is fabricated internally with a copolymer sheet of restricted thickness. Catalyst facilitated binding of the coupling agent 3,5-bis (trifluoromethyl) phenyl isocyanate has been carried out at the interior surface of the column. The initiator sodium diethyldithiocarbamate was bound to the coupling agent. A small amount of N-[2-(acryloylamino) phenyl] acrylamide was used along with methacrylic acid and styrene in the monomer mixture to induce a little polar character in the stationary phase fabricated inside the column. Twenty-three peptides have been separated from a chemically digested protein mixture present in cytochrome C in capillary electrochromatography, in addition to the separation of six commercial peptides. We achieved an average plate count of over 1.5 million/m with the column of current study both for the digested protein components and commercial peptides using 70/30% v/v (acetonitrile/20 mM ammonium formate) at pH 6.5. In addition, the column resulted in baseline separation of all the peptides with very good resolution, enhanced peak capacity, and better retention time span.