Gas chromatography of essential oil: State-of-the-art, recent advances, and perspectives

Microwave-Assisted Catalytic Deconstruction of Plastics Waste into Nanostructured Carbon and Hydrogen Fuel Using Composite Magnetic Ferrite Catalysts

Finding new catalysts and pyrolysis technologies for efficiently recycling wasted plastics into fuels and structured solid materials of high selectivity is the need of time. Catalytic pyrolysis is a thermochemical process that cracks the feedstock in an inert gas environment into gaseous and liquid fuels and a residue. This study is conducted on microwave-assisted catalytic recycling of wasted plastics into nanostructured carbon and hydrogen fuel using composite magnetic ferrite catalysts. The composite ferrite catalysts, namely, NiZnFe2O4, NiMgFe2O4, and MgZnFe2O4 were produced through the coprecipitation method and characterized for onward use in the microwave-assisted valorization of wasted plastics. The ferrite nanoparticles worked as a catalyst and heat susceptor for uniformly distributed energy transfer from microwaves to the feedstock at a moderate temperature of 450°C. The type of catalyst and the working parameters significantly impacted the process efficiency, gas yield, and structural properties of the carbonaceous residue. The tested process took 2-8 minutes to pulverize feedstock into gas and carbon nanotubes (CNTs), depending on the catalyst type. The NiZnFe2O4-catalyzed process produced CNTs with good structural properties and fewer impurities compared to other catalysts. The NiMgFe2O4 catalyst performed better in terms of hydrogen evolution by showing 87.5% hydrogen (H2) composition in the evolved gases. Almost 90% of extractable hydrogen from the feedstock evolved during the first 2 minutes of the reaction.

High Selectivity of A Novel Pillar[5]arene with Ester Units as a Gas Chromatographic Stationary Phase toward Aromatic Isomers

This work reports the first example of employing ester-functionalized pillar[5]arene (P5A-C10-OAc) stationary phase for gas chromatography (GC) separations. The as-fabricated P5A-C10-OAc column achieved improved column efficiency of 4270 plates/m and separation performance in contrast to the P5-C10-Br column. The P5A-C10-OAc column showed good separation performance for a wide range of analytes such as alkanes, bromoalkanes, ketones, fatty acid methyl esters, aldehydes, alcohols, halobenzenes, anilines, phenols, naphthalenes, and showed sharp and symmetrical peak shapes for analytes that are liable to peak-tailing in GC analysis. As testified by the challenging isomer mixtures (bromonitrobenzene, chloronitrobenzene, bromobenzaldehyde, chlorobenzaldehyde, nitrobenzaldehyde), the P5A-C10-OAc column exhibited comprehensively higher separation capability than the P5A-C10-Br, P5A-C10 and commercial HP-35 columns. This work demonstrates the great potential of pillararene-based stationary phases as a new type of stationary phases for GC separations.

Essential oils and their nanoformulations for breast cancer therapy

Breast Cancer (BC) is the most prevalent type of cancer in the world. Current treatments include surgery, radiation, and chemotherapy but often are associated with high toxicity to normal tissues, chemoresistance, and relapse. Thus, developing novel therapies which could combat these limitations is essential for effective treatment. In this context, phytochemicals are increasingly getting popular due to their safety profile, ability to efficiently target tumors, and circumvent limitations of existing treatments. Essential Oils (EOs) are mixtures of various phytochemicals which have shown potential anticancer activity in preclinical BC models. However, their clinical translation is limited by factors such as high volatility, low stability, and poor solubility. Nanotechnology has facilitated their encapsulation in a variety of nanostructures and proven to overcome these limitations. In this review, we have efficiently summarized the current knowledge on the anticancer effect of EOs and constituents in both in in vitro and in in vivo BC models. Further, we also provide a descriptive account on the potential of nanotechnology in enhancing the anti-BC activity of EOs and their constituents. The papers discussed in this review were selected using the keywords "antiproliferative Essential Oils in breast cancer," "anticancer activity of Essential Oil in breast cancer," and "cytotoxicity of Essential Oils in breast cancer" performed in PubMed and ScienceDirect databases.

Antimicrobial activity of essential oils against biofilms formed in dental acrylic resin: a systematic review of in vitro studies

This study aimed to answer the question formulated according to the PICO strategy: 'Which essential oils show antimicrobial activity against biofilms formed on dental acrylic resin?' composed by population (dental acrylic resin), intervention (application of essential oils), comparison (denture cleansers, antifungal drugs, chlorhexidine, and oral mouthwashes), and outcome (antibiofilm activity). In vitro experimental studies evaluating the activity of EOs on biofilm formed on acrylic resin were included. PRISMA guidelines were followed, and the search was performed in the PubMed, Science Direct, Embase, and Lilacs databases and in the gray literature using Google Scholar and ProQuest in December 2023. A manual search of the reference lists of the included primary studies was performed. Of the 1467 articles identified, 37 were selected for full-text reading and 12 were included. Twelve EOs were evaluated, of which 11 showed activity against Candida spp., 3 against Staphylococcus aureus, and 1 against Pseudomonas aeruginosa. The EOs of Cymbopogon citratus, Cinnamomum zeylanicum, and Cymbopogon nardus showed higher action than chlorhexidine, C. nardus higher than Listerine, C. citratus higher than nystatin, and Melaleuca alternifolia higher than fluconazole and nystatin. However, chlorhexidine was more effective than Lippia sidoides and Salvia officinalis, sodium hypochlorite was more effective than L. sidoides, nystatin was more effective than Zingiber officinale, Amphotericin B more effective than Eucalyptus globulus and M. alternifolia. In conclusion, the EOs of C. zeylanicum, C. citratus, C. nardus, and M. alternifolia showed antimicrobial activity to reduce biofilm on dental acrylic resin.

Development and Validation of a Gas Chromatography-Mass Spectrometry Method for the Analysis of the Novel Plant-Based Substance with Antimicrobial Activity

The research into new pharmaceutical substances based on essential oils, individual biologically active phytochemicals, and plant extracts is a priority in field of pharmaceutical sciences. A novel multicomponent substance based on Melaleuca alternifolia (M. alternifolia) leaf oil (TTO), 1,8-cineole (eucalyptol), and (-)-α-bisabolol with potent synergetic antimicrobial activity was investigated and suggested for the treatment of seborrheic dermatitis (SD) and dandruff. The objective of this research was to establish and validate a specific, accurate, and precise gas chromatography-mass spectrometry (GC-MS) method for further quantitative and qualitative analysis in order to ensure quality control. The main parameters of validation were suitability, specificity, linearity, accuracy, and intermediate precision according to the European Pharmacopoeia (XI edition), Russian Pharmacopoeia (XIV edition), and some parameters of ICH requirements. The peaks of fifteen chemical phytoconstituents were identified in the test sample solution with the prevalence of (-)-α-bisabolol (27.67%), 1,8-cineole (25.63%), and terpinen-4-ol (16.98%). These phytochemicals in the novel substance were chosen for standardization and validation of the GC-MS method. The chosen chromatographic conditions were confirmed for testing of the plant-based substance in a suitability test. It was established that the GC-MS method provides a significant separation, symmetry of peaks and resolution between phytochemicals. The calibration curves of each phytochemical had good linearity (R2 > 0.999) in five concentrations. In the same concertation range, the accuracy of terpinen-4-ol, 1,8-cineol, and (-)-α-bisabolol determination using the method of additives was 98.3-101.60%; the relative standard deviation (RSD) ranged from 0.89% to 1.51% and corresponded to requirements. The intraday and interday precision was ≤2.56%. Thus, the GC-MS method was validated to be specific, sensitive, linear, accurate, and precise. This GC-MS method could be recommended as a routine analytic technique for multicomponent plant-based substances-enriched terpenes.

End-modification of poly(ether-carbonate) copolymer by adamantane cages: An effective approach for improving the selectivity of gas chromatographic stationary phases

This work reports the investigation of a new poly(propylene-carbonate) copolymer terminated by the adamantane cages (APPC) as the stationary phase for gas chromatographic (GC) analyses. In GC, the selectivity of a stationary phase is the key factor that governs the column separation performance for analytes, particularly those of high similarity in structures and properties. As such, we employed more than a dozen of isomer mixtures of separation difficulty for investigating the separation performance of the APPC column, involving the isomers of alkanes, alkylbenzenes, halobenzenes phenols and anilines. Meanwhile, the column coated with poly(propylene carbonate) diol (PPCD) differing from APPC only in their terminal groups and two commercial columns coated with polyethylene glycol (PEG) and polysiloxane, respectively, were used as the reference columns. The separation results evidenced the distinctly advantageous performance of the APPC column over the reference columns. Moreover, the APPC column showed excellent repeatability and reproducibility with the relative standard deviation (RSD) values over the range of 0.01%-0.04% for run-to-run, 0.15%-0.28% for day-to-day and 3.4%-3.9% for column-to-column (n = 4). Its application to GC-MS analysis of the verbena essential oil demonstrated its separation advantages for a wide range of components in practical samples. Up to date, the adamantyl-terminated poly(ether-carbonate) copolymers have not been reported in any fields. Its high-resolution performance demonstrates the feasibility of adamantyl-terminated block copolymers as highly selective stationary phases for GC analyses, which offers a vast room for fundamental researches and applications.

Extraction and purification of α-pinene; a comprehensive review

Extensive use of α-pinene in cosmetics, and medicine, especially for its antioxidant/antibacterial, and anti-cancer properties, and also as a flavoring agent, has made it a versatile product. α-Pinene (one of the two pinene isomers) is the most abundant terpene in nature. When extracting α-pinene from plants and, to a lesser extent, fruits, given that its purity is essential, purification methods should also be used as described in this study. Also, an attempt has been made to describe the extraction techniques of α-pinene, carried out by conventional and novel methods. Some disadvantages of conventional methods (such as hydrodistillation or solvent extraction) are being time consuming, low capacity per batch and being labor intensive and the requirement of trained operators. Most novel methods, such as supercritical fluid extraction and microwave-assisted extraction, can reduce the extraction time, cost, and energy compared to conventional methods, and, in fact, the extraction and preservation efficiency of α-pinene in these methods is higher than conventional methods. Although the above-mentioned extraction methods are effective, they still require rather long extraction times. In fact, advanced methods such as green and solvent-free ultrasonic-microwave-assisted extraction are much more efficient than microwave-assisted extraction and ultrasound-assisted extraction because the extraction efficiency and separation of α-pinene in these methods are higher; furthermore, no solvent consumption and maximum extraction efficiency are some crucial advantages of these techniques. However, the application of some novel methods, such as ultrasound-assisted extraction, in industry scale is still problematic because of their intricate design data.

High separation performance of carbon dioxide-based poly(ether-carbonate) copolymer for gas chromatographic analyses

This work presents the investigation of a novel CO₂-based poly(ether-carbonate) copolymer, namely poly(propylene ether-carbonate)diol (PPCD), for gas chromatographic (GC) analyses. The PPCD column exhibited column efficiency of 4000 plates/m determined by naphthalene at 120 ℃ with the retention factor 6.23. Its separation performance was investigated by adopting a wide variety of analytes and isomers, including the isomer mixtures of alkanes, substituted benzene isomers with diverse groups, phenols and anilines, and the mixtures of organic solvents of high volatility, aliphatic amines and N-heterocycles. As a result, the PPCD column displayed distinctly higher resolving capability than the commercial columns described herein and achieved high column inertness towards acidic/basic analytes without involving any deactivation procedure. Additionally, it displayed excellent separation repeatability and reproducibility with the relative standard deviation (RSD) values less than 0.01% for within-day and in the range of 0.26% - 0.36% for between-day and 3.0% - 4.1% for between-column (n = 4). Further, the PPCD column (30 m) was used to GC-MS analysis of the lemongrass essential oil and resolved more components well than the indicated commercial columns, evidencing its outstanding separation performance for analyses of complex samples. Up to date, the CO₂-based poly(ether-carbonate) copolymers are not reported in the field of chromatography. This work demonstrates their promising future as a new type of selective and inert stationary phases for practical GC analyses.

Corylus avellana L. Natural Signature: Chiral Recognition of Selected Informative Components in the Volatilome of High-Quality Hazelnuts

The volatile fraction of plant-based foods provides useful functional information concerning sample-related variables such as plant genotype and phenotype expression, pedoclimatic and harvest conditions, transformation/processing technologies, and can be informative about the sensory quality. In this respect, the enantiomeric recognition of the chiral compounds increases the level of information in profiling studies, being the biosynthesis of native compounds often stereo-guided. Chiral native volatiles mostly show an enantiomeric excess that enables origin authentication or support correlation studies between chemical patterns and sensory profiles. This study focuses, for the first time, on the enantiomeric composition of a large set of chiral compounds within the complex volatilome of Corylus avellana L. belonging to different cultivars (Tonda Gentile Romana, Tonda Gentile Trilobata, Anakliuri) and harvested in different geographical areas (Italian and Georgian). Besides native components profiled in raw kernels, volatiles formed after technological treatment (i.e., roasting) are also considered. Headspace solid-phase microextraction combined with enantioselective gas chromatography-mass spectrometry enables the accurate tracking and annotation of about 150 compounds across many samples. The results show that chiral compounds have diagnostic distribution patterns within hazelnut volatilome with cultivar and harvest region playing the major role. Moreover, being some of these chiral molecules also key-aromas, their distribution has a decisive impact on the sensory properties of the product. In particular, the enantiomeric composition of (E)-5-methyl-2-hepten-4-one (filbertone) resulted to be discriminant for origin authentication. The enantiomeric distribution showed, according to literature, an excess of the (S)-enantiomer in both raw and roasted samples volatilome with larger differences in raw samples. The amount of both (R) and (S)-filbertone increases during roasting; the most marked increase for (R)-enantiomer is observed in Italian samples, thus supporting evidence of better hedonic properties and more pleasant odor and aroma.

Bay Laurel (Laurus nobilis L.) Essential Oil as a Food Preservative Source: Chemistry, Quality Control, Activity Assessment and Applications to Olive Industry Products

Essential oils (EOs) find application as flavoring agents in the food industry and are also desirable ingredients as they possess preservative properties. The Mediterranean diet involves the use of a lot of herbs and spices and their products (infusions, EOs) as condiments and for the preservation of foods. Application of EOs has the advantage of homogeneous dispersion in comparison with dry leaf use in small pieces or powder. Among them, Laurus nobilis (bay laurel) L. EO is an interesting source of volatiles, such as 1,8-cineole and eugenol, which are known for their preservative properties. Its flavor suits cooked red meat, poultry, and fish, as well as vegetarian dishes, according to Mediterranean recipes. The review is focused on its chemistry, quality control aspects, and recent trends in methods of analysis and activity assessment with a focus on potential antioxidant activity and applications to olive industry products. Findings indicate that this EO is not extensively studied in comparison with those from other Mediterranean plants, such as oregano EO. More work is needed to establish authenticity and activity methods, whereas the interest for using it for the preparation of flavored olive oil or for the aromatization and preservation of table oils must be further encouraged.