Optimization of the extraction process of flavonoids from Trollius ledebouri with natural deep eutectic solvents

Ultrasound-assisted natural deep eutectic solvent extraction of anthocyanin from Vitis davidii Foex. pomace: Optimization, identification, antioxidant activity and stability

An efficient and environmentally friendly extraction method utilizing an ultrasonic-assisted natural deep eutectic solvent (UAE-NADES) was developed for the extraction of anthocyanins from Vitis davidii Foex. A screening process was conducted to evaluate seven different NADESs, resulting in the selection of a high-efficiency NADES (choline chloride-glycerol (ChGly)). To analyze the influence of significant factors and their interactive effects on the total anthocyanin content (TAC), response surface methodology (RSM) was employed. Furthermore, the conditions of extraction were optimized to attain the most productive yield of total anthocyanin content. The theoretical optimal conditions were determined to be a liquid‒solid ratio of 34.46 mL/g, an extraction temperature of 322.79 K and an ultrasonic power of 431.67 W, under which the verification TAC value (3.682 ± 0.051 mg/g) was highly consistent with the theoretical value (3.690 mg/g). Seventeen anthocyanins were identified by UPLC‒MS/MS. The contents of the main anthocyanins peonidin-3,5-O-diglucoside, malvidin-3,5-O-diglucoside, malvidin-3-O-5-O-(6-O-coumaroyl)-diglucoside, and malvidin-3-O-(6-O-p-coumaroyl)-glucoside in the ChGly extracts were significantly higher than those in the acid‒alcohol extract. Stability assays showed that the stability of anthocyanins in ChGly is higher than that in acidified alcohol at higher temperature, pH and stronger illumination. In vitro antioxidant results showed that the antioxidant capacities of the compounds extracted through the use of UAE-NADES were higher than those extracted using acidified alcohol. Additionally, the thermal behavior of anthocyanin extracts was further characterized through DSC analysis, highlighting the influence of ChGly or acidic ethanol. The results indicate that UAE-NADES exhibits a significant effect on the extraction of anthocyanins from plant byproducts, suggesting that its potential for use in the food sector is considerable.

Extraction and identification of polyphenol from Camellia oleifera leaves using tailor-made deep eutectic solvents based on COSMO-RS design

Camellia oleifera leaf is a rich source of polyphenols. In this study, 50 polyphenolic compounds from C. oleifera leaves was identified by UHPLC-Q-TOF-MS/MS. Accordingly, COSMO-RS was used in the design of deep eutectic solvents (DESs) to extract those polyphenols. 17 types of choline chloride (ChCl)-based DESs molecules (ChCl-acid, ChCl-sugar, ChCl-alcohol, ChCl-amine and amide) were synthetized into virtual cluster molecules with Materials Studio software. They were used to determine the activity coefficients with the standard compounds. The results showed that the amine and amide-based DESs exhibited outstanding dissolution effects. Additionally, ChCl-acetamide was selected as the solvent in response surface methodology to optimize the ultrasound-assisted DES extraction process parameters, including ultrasonic power, ultrasonic time, and liquid-solid ratio, resulting in an improved total phenolic content of 131.63 ± 0.85 mg GAE/g. This study developed a system utilizing UHPLC-Q-TOF-MS/MS to acquire specific substances required for COSMO-RS calculations.

Recovery of Cembratrien-Diols from Waste Tobacco (Nicotiana tabacum L.) Flowers by Microwave-Assisted Deep Eutectic Solvent Extraction: Optimization, Separation, and In Vitro Bioactivity

Deep eutectic solvents (DESs) are novel solvents with physicochemical properties similar to those of ionic liquids, and they have attracted extensive attention for the extraction of bioactive compounds from different plant materials in the context of green chemistry and sustainable development. In this study, seven DESs with different polarities were explored as green extraction solvents for cembratrien-diols (CBT-diols) from waste tobacco flowers. The best solvent, DES-3 (choline chloride: lactic acid (1:3)), which outperformed conventional solvents (methanol, ethanol, and ethyl acetate), was selected and further optimized for microwave-assisted DES extraction using the response surface methodology. The maximum yield of CBT-diols (6.23 ± 0.15 mg/g) was achieved using a microwave power of 425 W, microwave time of 32 min, solid/liquid ratio of 20 mg/mL, and microwave temperature of 40 °C. Additionally, the isolated CBT-diols exhibited strong antimicrobial activity against Salmonella, Staphylococcus aureus, Escherichia coli, Bacillus subtilis, and Pseudomonas aeruginosa and antitumor activity in the human liver cancer HepG2 and SMMC-7721 cell lines. This study highlights the feasibility of recovering CBT-diols from tobacco flower waste using DESs and provides opportunities for potential waste management using green technologies.

Advances in Flavonoid Research: Sources, Biological Activities, and Developmental Prospectives

At present, the occurrence of a large number of infectious and non-communicable diseases poses a serious threat to human health as well as to drug development for the treatment of these diseases. One of the most significant challenges is finding new drug candidates that are therapeutically effective and have few or no side effects. In this respect, the active compounds in medicinal plants, especially flavonoids, are potentially useful compounds with a wide range of pharmacological activities. They are naturally present in nature and valuable in the treatment of many infectious and non-communicable diseases. Flavonoids are divided into fourteen categories and are mainly derived from plant extraction, chemical synthesis and structural modification, and biosynthesis. The structural modification of flavonoids is an important way to discover new drugs, but biosynthesis is currently considered the most promising research direction with the potential to revolutionize the new production pipeline in the synthesis of flavonoids. However, relevant problems such as metabolic pathway analyses and cell synthesis protocols for flavonoids need to be addressed on an urgent basis. In the present review, new research techniques for assessing the biological activities of flavonoids and the mechanisms of their biological activities are elucidated and their modes of interaction with other drugs are described. Moreover, novel drug delivery systems, such as nanoparticles, bioparticles, colloidals, etc., are gradually becoming new means of addressing the issues of poor hydrophilicity, lipophilicity, poor chemical stability, and low bioavailability of flavonoids. The present review summarizes the latest research progress on flavonoids, existing problems with their therapeutic efficacy, and how these issues can be solved with the research on flavonoids.

Anti-biofilm and bacteriostatic effects of three flavonoid compounds on Streptococcus mutans

Streptococcus mutans (S. mutans) is the main cariogenic pathogen associated with dental caries. Orientin-2''-O-β-L-galactoside, orientin and vitexin are natural flavonoids compound. In this study, the antibacterial ability of these flavonoids and their mechanisms in inhibiting S. mutans biofilm formation were investigated. Inhibition zone and 2-fold-dilution tests showed that these flavonoids exerted inhibitory effects on S. mutans. Phenol sulfuric acid method and lactate dehydrogenase (LDH) test revealed that they could reduce EPS formation and stimulate S. mutans to release LDH. Moreover, crystal violet and live/dead bacterial staining test showed that they inhibited biofilm formation. Finally, qRT-PCR test indicated that the down-regulated the transcription levels of spaP, srtA, brpA, gtfB and luxS genes of S. mutans. In conclusion, orientin-2''-O-β-L-galactoside, orientin and vitexin had antibacterial and anti-biofilm activities.

Efficient Extraction of Flavonoids from Lotus Leaves by Ultrasonic-Assisted Deep Eutectic Solvent Extraction and Its Evaluation on Antioxidant Activities

The discovery of a green extraction solvent for natural plants could promote related research. In this study, deep eutectic solvents (DES) were used as green solvents coupled with an ultrasound-assisted extraction method (UAE) to extract flavonoids from lotus leaves. Thirty-four different DES were performed and choline chloride/urea with 40% water was chosen as the most promising one, and the related parameters in the procedures were optimized, resulting in the highest extraction amount of flavonoids in lotus leaves. D-101 was selected from four macroporous resins to separate the flavonoids from DES. Moreover, DES could be recycled and efficiently reused four times with satisfactory performances. In addition, the lotus leaf flavonoids from the DES extract exhibited antioxidant activities in five kinds of assays including DPPH, ABTS, Fe3+ reducing, FRAP, and Fe2+ chelating. It also showed antibacterial activities on Staphylococcus aureus and Escherichia coli bacterial strains with minimal inhibitory concentrations at 1666 μg/mL and 208 μg/mL, respectively. In the HPLC analysis, the three main components in the DES extract were identified as astragalin, hyperoside, and isoquercitrin. In conclusion, the developed UAE-DES followed by macroporous resin treatment could become an efficient and environmentally friendly extraction and enrichment method for flavonoids from lotus leaves and other natural products.

Ultrasonic-Assisted Efficient Extraction of Coumarins from Peucedanum decursivum (Miq.) Maxim Using Deep Eutectic Solvents Combined with an Enzyme Pretreatment

In this study, the ultrasonic-assisted extraction of total coumarins from Peucedanum decursivum (Miq.) Maxim (P. decursivum) via the combination of deep eutectic solvents (DESs) with cellulase pretreatment was carried out. Among the 15 kinds of DESs with choline chloride as hydrogen bond acceptors, the DES system of choline chloride/1,4-butanediol with a molar ratio of 1:4 showed the best extraction effect. First, single-factor experiments were performed using the following factors: liquid–solid ratio, pH, enzyme dosage and ultrasonic temperature. The Box–Behnken design (BBD) and response surface methodology (RSM) were employed to optimize the extraction conditions and obtain the following optimal parameter values for the extraction of coumarins from P. decursivum: liquid–solid ratio 14:1 mL/g, pH 5.0, enzyme dosage 0.2%, ultrasonic temperature 60 °C and ultrasonic time 50 min. Under these conditions, the extraction yield of total coumarins from P. decursivum could reach 2.65%, which was close to the predicted extraction yield of 2.68%. Furthermore, the contents of six coumarins, namely, umbelliferone, nodakenin, xanthotoxin, bergapten, imperatorin and decursin were determined to be 0.707 mg·g⁻¹, 0.085 mg·g⁻¹, 1.651 mg·g⁻¹, 2.806 mg·g⁻¹, 0.570 mg·g⁻¹ and 0.449 mg·g⁻¹, respectively, using HPLC-MS after the optimization. In addition, the cell fragmentation of P. decursivum powder obtained using ultrasonic-assisted DES extraction with enzyme pretreatment was found to be the most comprehensive using scanning electron microscopy (SEM), which indicated the highest extraction efficiency for P. decursivum. Finally, the in vitro antioxidant activity of the extracts was evaluated via radical scavenging with 1,1-diphenyl-2-picrylhydrazyl (DPPH), which showed that ultrasonic-assisted DES extraction with enzyme pretreatment exhibited significant antioxidant activity with DPPH radical scavenging of up to 97.90%. This work developed a new and efficient extraction method for coumarins.

Single-Stage Extraction and Separation of Co2+ from Ni2+ Using Ionic Liquid of [C4H9NH3][Cyanex 272]

The purpose of this study was to optimize the extraction conditions for separating Co²⁺ from Ni²⁺ using N-butylamine phosphinate ionic liquid of [C₄H₉NH₃][Cyanex 272]. A Box–Behnken design of response surface methodology was used to analyze the effects of the initial pH, extraction time, and extraction temperature on the separation factor of Co²⁺ from sulfuric acid solution containing Ni²⁺. The concentrations of Co²⁺ and Ni²⁺ in an aqueous solution were determined using inductively coupled plasma-optical emission spectrometry. The optimized extraction conditions were as follows: an initial pH of 3.7, an extraction time of 55.8 min, and an extraction temperature of 330.4 K. The separation factor of Co²⁺ from Ni²⁺ under optimized extraction conditions was 66.1, which was very close to the predicted value of 67.2, and the error was 1.7%. The equation for single-stage extraction with high reliability can be used for optimizing the multi-stage extraction process of Co²⁺ from Ni²⁺. The stoichiometry of chemical reaction for ion-exchange extraction was also investigated using the slope method.