Extraction of parabens by melamine sponge with determination by high-performance liquid chromatography

Magnetic polyimide nanocomposite for analysis of parabens in cooking wine by magnetic solid-phase extraction coupled with gas chromatography - Mass spectrometry

A magnetic polyimide (PI) nanocomposite has been synthesized by phase inversion of PI and simultaneous encapsulation of Fe3O4 nanoparticles. The Fe3O4/PI nanocomposite was characterized by a variety of characterization techniques, including infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, nitrogen adsorption-desorption isotherms, and vibrating sample magnetometry. The results showed that the prepared nanocomposite had a homogeneous structure, adequate specific surface area (76.1 m2/g) and high saturation magnetization (42.9 emu/g). Using parabens as model analytes, the performance of the Fe3O4/PI nanocomposite as an adsorbent for magnetic solid-phase extraction (MSPE) was evaluated. The extracted parabens were desorbed and determined by gas chromatography-mass spectrometry (GC-MS). The parameters affecting the extraction and desorption efficiency of parabens were optimized. Under the optimal conditions, the developed MSPE/GC-MS method was successfully applied to the determination of parabens in cooking wine. The MSPE/GC-MS method exhibited broad linearity (0.2-100 µg/L), low detection limits (0.04-0.05 µg/L), and satisfactory extraction recoveries (79.2 %-113.3 %) with relative standard deviations (RSDs) ranging from 0.7 % to 10.4 %. For real cooking wine samples, the spiked recoveries ranged from 91.7 % to 118.7 % with RSDs of 1.0 %-11.2 %. The results demonstrated that the Fe3O4/PI nanocomposite was an effective adsorbent, and this work provides a novel reference for the easy preparation of magnetic adsorbent materials.

Green Method for the Selective Electromembrane Extraction of Parabens and Fluoroquinolones in the Presence of NSAIDs by Using Biopolymeric Chitosan Films

A chitosan biopolymeric membrane was successfully used as a support in a green electromembrane extraction procedure for the simultaneous and selective extraction of seven parabens and three fluoroquinolones in the presence of three non-steroidal anti-inflammatory drugs. The optimal experimental conditions (10 mL donor phase and 50 μL acceptor phase, pH 10 in both phases; 80 V of applied voltage during 15 min of extraction time) were determined, providing high enrichment factors for six of the studied parabens (EF ≥ 90) and the three fluoroquinolones (EF ≥ 50). Wide linear concentration ranges (0.5-500 μg L^-1), good linearity (>97%), low limits of detection (0.2-1.1 μg L^-1), and good repeatability (relative standard deviation values 4-10%) were achieved. The proposed method was successfully applied for the extraction of the target analytes from different kinds of water samples (river, lake, and swimming pool). The usage of a chitosan membrane in the extraction process presents many advantages, as it is a biodegradable and versatile support, offering a good alternative to commercial plastic materials commonly used in this methodology and these procedures.

Ecofriendly appraisal of stability-indicating high-performance chromatographic assay of canagliflozin and metformin with their toxic impurities; in silico toxicity prediction

Canagliflozin is an oral hypoglycemic drug recently formulated in combination with a biguanide, metformin hydrochloride, for improving its hypoglycemic action. Canagliflozin has one reported major degradation product, also metformin hydrochloride has one reported major degradation product, cyanoguanidine, and has a potential toxic impurity, melamine, that is reported to cause crystalluria that causes chronic kidney inflammation and nephrolithiasis leading to a renal failure. As per International Conference of Harmonization guidelines; a drug degradation product is classified as a type of drug impurities. Toxicity profiles of canagliflozin and metformin major degradation products were studied where in silico data disclosed toxicity too; the development of a specific chromatographic thin layer chromatographic assay was a must for quantification of such toxic related components along with the drugs in laboratory-prepared mixtures as a superior study. The proposed method was validated as per the International Conference of Harmonization and applied for the assay of Vokanamet tablets. The separation was achieved using acetone:ethyl acetate:acetic acid (8:2:0.2, by volume) as scanning eluted bands at 205 nm. For minimal environmental impact; greenness profile appraisal of the proposed assay was performed by three greenness assessment approaches; analytical Eco-Scale, Green Analytical Procedure Index, and Greenness metric approaches.

Hybrid Materials Formed with Green Metal-Organic Frameworks and Polystyrene as Sorbents in Dispersive Micro-Solid-Phase Extraction for Determining Personal Care Products in Micellar Cosmetics

Hybrid materials based on polystyrene (PS) and green metal-organic frameworks (MOFs) were synthesized, characterized, and evaluated as potential sorbents in dispersive micro-solid-phase extraction (µ-dSPE). Among the resulting materials, the hybrid PS/DUT-67(Zr) was selected as the adequate extraction material for the monitoring of six personal care products in micellar cosmetic samples, combining the µ-dSPE method with ultra-high performance liquid chromatography (UHPLC) coupled to ultraviolet/visible detection (UV/Vis). Univariate studies and a factorial design were performed in the optimization of the microextraction procedure. The compromise optimum extraction conditions included 20 mg of PS/DUT-67(Zr) for 10 mL of sample, 2 min of extraction time, and two desorption steps using 100 µL of acetonitrile and 5 min assisted by vortex in each one. The validated μ-dSPE-UHPLC-UV/Vis method presented limits of detection and quantification down to 3.00 and 10.0 μg·L⁻¹, respectively. The inter-day precision values were lower than 23.5 and 21.2% for concentration levels of 75 μg·L⁻¹ and 650 μg·L⁻¹, respectively. The hydrophobicity of the resulting PS/DUT-67(Zr) material was crucial for the improvement of its extraction capacity in comparison with its unitary components, showing the advantages of combining MOFs with other materials, getting new sorbents with interesting properties.