Rate constants for the gas-phase reactions of nitrate radicals with geraniol, citronellol, and dihydromyrcenol

Does the ubiquitous use of essential oil-based products promote indoor air quality? A critical literature review

Essential oils are frequently used as natural fragrances in housecleaning products and air fresheners marketed as green and healthy. However, these substances are volatile and reactive chemical species. This review focuses on the impact of essential oil-based household products on indoor air quality. First, housecleaning products containing essential oils are explored in terms of composition and existing regulations. Specific insight is provided regarding terpenes in fragranced housecleaning products, air fresheners, and pure essential oils. Second, experimental methodologies for terpene monitoring, from sampling to experimental chambers and analytical methods, are addressed, emphasizing the experimental issues in monitoring terpenes in indoor air. Third, the temporal dynamics of terpene emissions reported in the literature are discussed. Despite experimental discrepancies, essential oil-based products are significant sources of terpenes in indoor air, inducing a high exposure of occupants to terpenes. Finally, the fate of terpenes is explored from sorptive and reactive points of view. In addition to terpene deposition on surfaces, indoor oxidants may induce homogeneous and heterogeneous reactions, resulting in secondary pollutants, such as formaldehyde and secondary organic aerosols. Overall, essential oil-based products can negatively impact indoor air quality; therefore, standard protocols and real-scale approaches are needed to explore the indoor physics and chemistry of terpenes, from emissions to reactivity.

A QSAR for the prediction of rate constants for the reaction of VOCs with nitrate radicals

A QSAR for the prediction of rate constants for the degradation of volatile organic compounds by nitrate radicals is developed using the Partial Least Squares technique. The QSAR is based on experimental data published in the literature for 260 compounds. They are modeled by a set of calculated descriptors from standard descriptor generation tools and from quantum chemistry. Out of several diversity-based partitionings of the data set a diverse set of 99 compounds turned out to be the optimum choice with regard to simplicity and performance. The final QSAR model is characterized by r(2) = 0.831 (fit) and q(2) = 0.823 (prediction), and by an r(2)pred = 0.862 for the n = 155 external validation set. The QSAR needs 3 latent variables. The most important descriptors for the QSAR are the ionization potential, obtained from density functional theory, and the energy of the highest occupied molecular orbital, which are modulated by fingerprints indicating the presence of specific molecular fragments like functional groups or ring systems. The applicability domain of the new QSAR was studied for some compound classes which are important for the crop protection industry, including (di)hydroxbenzenes and heterocyclic compounds.

Volatile organic compound conversion by ozone, hydroxyl radicals, and nitrate radicals in residential indoor air: Magnitudes and impacts of oxidant sources

Indoor chemistry may be initiated by reactions of ozone (O₃), the hydroxyl radical (OH), or the nitrate radical (NO₃) with volatile organic compounds (VOC). The principal indoor source of O₃ is air exchange, while OH and NO₃ formation are considered as primarily from O₃ reactions with alkenes and nitrogen dioxide (NO₂), respectively. Herein, we used time-averaged models for residences to predict O₃, OH, and NO₃ concentrations and their impacts on conversion of typical residential VOC profiles, within a Monte Carlo framework that varied inputs probabilistically. We accounted for established oxidant sources, as well as explored the importance of two newly realized indoor sources: (i) the photolysis of nitrous acid (HONO) indoors to generate OH and (ii) the reaction of stabilized Criegee intermediates (SCI) with NO₂ to generate NO₃. We found total VOC conversion to be dominated by reactions both with O₃, which almost solely reacted with d-limonene, and also with OH, which reacted with d-limonene, other terpenes, alcohols, aldehydes, and aromatics. VOC oxidation rates increased with air exchange, outdoor O₃, NO₂ and d-limonene sources, and indoor photolysis rates; and they decreased with O₃ deposition and nitric oxide (NO) sources. Photolysis was a strong OH formation mechanism for high NO, NO₂, and HONO settings, but SCI/NO₂ reactions weakly generated NO₃ except for only a few cases.

Kinetics and mechanism for OH-initiated gas-phase chemistry of α-terpineol

For the OH-initiated indoor oxidation of α-terpineol, the reaction scheme is proposed and the main reaction pathways are reported.

Ultrafine particle emissions from essential-oil-based mosquito repellent products

Ultrafine particle (UFP) emissions from three essential-oil-based mosquito repellent products (lemon eucalyptus (LE), natural insects (NI), and bite shield (BS)) were tested in a 386 l chamber at a high air exchange rate of 24/h with filtered laboratory air. Total particle number concentration and size distribution were monitored by a condensation particle counter and a scanning mobility particle sizer, respectively. UFPs were emitted from all three products under indoor relevant ozone concentrations (~ 17 ppb). LE showed a nucleation burst followed by a relatively stable and continuous emission while the other two products (NI and BS) showed episodic emissions. The estimated maximum particle emission rate varied from 5.4 × 10(9) to 1.2 × 10(12) particles/min and was directly related to the dose of mosquito repellent used. These rates are comparable to those due to other indoor activities such as cooking and printing. The emission duration for LE lasted for 8-78 min depending on the dose applied while the emission duration for NI and BS lasted for 2-3 h.

PRACTICAL IMPLICATIONS

Certain essential-oil-based mosquito repellents can produce high concentrations of UFPs when applied, even at low ozone levels. Household and personal care products that contain essential oil may need to be tested at indoor relevant ozone levels to determine their potential to increase personal UFP exposures.

Use of denuder/filter apparatus to investigate terpene ozonolysis

A denuder/filter apparatus was used to collect the gaseous and particulate reaction products from ozonlysis of α-pinene, limonene and α-terpineol in an effort to develop sampling techniques for characterizing indoor environment chemistry. Carboxylic acids found in the particulate phase were derivatized to 2,2,2-trifuoroethylamides by reaction with 3-ethyl-1-[3-(dimethylamino)propyl]carbodiimide hydrochloride (EDC) and 2,2,2-trifluoroethylamine hydrochloride (TFEA). Carbonyl compounds collected in both gas phase and particulate phase were derivatized to their respective oximes by reaction with O-(2,3,4,5,6-pentafluoro-benzyl)hydroxylamine hydrochloride (PFBHA). The ozonolysis of α-pinene yielded the carboxylic acids: cis-pinonic acid and pinic acid and the proposed carboxylic acids methanetricarboxylic acid and terpenylic acid; the carbonyls: 4-oxopentanal, norpinonaldehyde, pinon aldehyde and the proposed carbonyl methylidenepropanedial. The ozonolysis of limonene yielded the carboxylic acids: limonic acid and pinic acid and the carbonyls: 1-(4-methylcyclohex-3-en-1-yl)ethanone (4AMCH), glyoxal, methyl glyoxal, 4-oxopentanal and 6-oxo-3-(prop-1-en-2-yl)heptanal (IPOH). The ozonolysis of α-terpineol yielded the proposed carboxylic acids: terpenylic acid and homoterpenylic acid and the carbonyls: (5E)-6-hydroxyhept-5-en-2-one, methyl glyoxal and 4-oxopentanal.