Influence of the angle of irradiation of the Er,Cr:YSGG laser on the morphology, attachment of blood components, roughness, and root wear: in vitro study

Er,Cr:YSGG Laser as a Means of Orthodontic Adhesive Removal: Myth or Reality?

Objective: This study aimed to compare the effect of Er,Cr:YSGG laser with a tungsten carbide bur in orthodontic finishing on the enamel surface roughness and the heat generated in the pulp chamber. Methods: Before bonding, of 125 intact extracted premolar teeth, 15 teeth were randomly assigned to the control group. Of the remaining 110 bonded teeth, 50 were used to determine the laser parameters, and 60 were included in the main in vitro study. After debonding, the teeth were randomly distributed among four study groups (n = 15) for finishing with laser beams (Er,Cr:YSGG, Waterlase) with and without polishing with Sof-Lex discs, and finishing with a bur (tungsten carbide, Reliance) with and without polishing with Sof-Lex discs. The thermal changes were measured during finishing using a thermo-controller-coupled thermocouple placed in the pulp chamber. Enamel surface roughness was evaluated qualitatively under a scanning electron microscope (SEM) and quantitatively under an atomic force microscope (AFM). Results: The thermal changes of the bur group were significantly higher than those in the laser group (p = 0.0001). Quantitatively, the surface roughness values of all the study groups were significantly higher than those of the control group (p < 0.05), with no significant difference between the study groups (p > 0.05). SEM analysis confirmed the AFM measurements. Conclusions: Er,Cr:YSGG can be recommended as an alternative for a carbide bur for adhesive agent removal after orthodontic debonding, considering its mild thermal effect on the pulp. Polishing with Sof-Lex discs did not significantly reduce the surface roughness, regardless of the finishing procedure.

Clinical effectiveness of Er,Cr:YSGG lasers in non-surgical treatment of chronic periodontitis: a meta-analysis of randomized controlled trials

The meta-analysis aimed to systematically evaluate all the available pieces of evidence concerning the clinical effectiveness of Er,Cr:YSGG lasers (erbium, chromium, yttrium scandium gallium garnet laser) in the non-surgical treatment of patients with chronic periodontitis, and provide guidance for clinicians about the application of Er,Cr:YSGG lasers during the process of non-surgical periodontal treatments. The meta-analysis was conducted with data extracted from 16 randomized controlled clinical trials (RCTs) that compare Er,Cr:YSGG lasers adjunct/substitute to scaling and root planing (SRP) with SRP alone for the treatment of chronic periodontitis published in English or Chinese from January 2000 to January 2020. The weighted mean differences (WMDs) and 95% confidence intervals (CIs) were counted for probing depth (PD) reduction, clinical attachment level (CAL) gain, and visual analogue scale (VAS) score. Heterogeneity of each study was evaluated with the Q test. The publication bias was measured using Begg's adjusted rank correlation test. Sixteen RCTs with 606 patients were included in the meta-analysis. There were statistically significant differences between Er,Cr:YSGG lasers adjunct/substitute to SRP and SRP alone in the PD reduction at 1-month follow-up (WMD = ‑ 0.35, 95% CI [- 0.63, ‑ 0.07], P = 0.013), 3-month follow-up (WMD = - 0.342, 95% CI [- 0.552, - 0.132], P = 0.001), CAL gain at 3-month follow-up (WMD = - 0.17, 95% CI [- 0.31, 0.03], P = 0.017), and VAS score (WMD = - 2.395, 95% CI [- 3.327, - 1.464], P = 0.000) immediately after treatment. There were no significant differences of PD reduction and CAL change at 6-month follow-up. The present meta-analysis indicated that Er,Cr:YSGG lasers provided additional effectiveness in PD reduction and CAL gain at short-term follow-ups and there was less pain compared with SRP alone.

Effects of an Er,Cr:YSGG Laser on Bone Regeneration in Critical-Sized Calvarial Defects of Rats Exposed to Inhalation of Cigarette Smoke

Objective: To evaluate the effect of the Er,Cr:YSGG laser on healing of critical-sized calvarial defects (CSDs) in rats submitted to inhalation of cigarette smoke. Background: Smoking has been implicated with the delay in the bone healing after osteotomy procedures, then the use of the Er,Cr:YSGG laser for osteotomy in smokers could be an alternative to the conventional drills. Methods: One hundred animals were randomly allocated into four groups: trephine-the CSDs were made with a trephine drill in healthy rats; Er,Cr:YSGG-the CSDs were made with the Er,Cr:YSGG laser in healthy rats; Trephine-S-the CSDs were made with a trephine drill in rats exposed to cigarette smoke; and Er,Cr:YSGG-S-the CSDs were made with the Er,Cr:YSGG laser in rats exposed to cigarette smoke. The inhalation of cigarette smoke started 7 days before the surgical procedure until euthanasia (immediately, 7, 15, 30, or 60 days after the surgical procedure). A histometric analysis and a histological description were performed to evaluate (1) the residual linear lengths and bone formation in the CSDs; (2) the quality of bone healing. Results: The use of Er,Cr:YSGG laser induces more bone formation compared with the trephine in smokers; however, the closure of the CSD was only superior in the Er,Cr:YSGG-S group compared to the Trephine-S group at the 60-day period. Conclusions: The use of the Er,Cr:YSGG laser stimulated the bone repair process after osteotomy procedures in animals submitted to exposure of inhalation of cigarette smoke.

The effect of a 3% hydroxyapatite paste prophylaxis after different root-scaling procedures in periodontics

Abstract Introduction Root-scaling procedures on the root surface show to increase root surface roughness during instrumentation. The use of a prophylactic paste reduces the roughness. Objetive This study evaluated the influence of prophylaxis paste on the surface roughness of root dentin after hand instruments (HI), ultrasonic scalers (US) and rotational instruments (RI) were applied to root surfaces. Material and method Fifty bovine roots were prepared and randomly divided into 10 groups (n=5) in which instrumentation with HI, US, or RI was carried out with or without prophylaxis using either conventional or 3% hydroxyapatite paste; additionally, a control group without treatment was included. The Ra and Rz roughness values were measured using a perfilometer. The morphological aspects of the root surfaces were analysed qualitatively by scanning electron microscopy (SEM). Data were analysed using two-way ANOVA followed by Tukey’s test (α = 0.05). Result The scaling method and the prophylaxis procedure significantly influenced (p < 0.05) root surface roughness. Treatment with US and prophylaxis with 3% hydroxyapatite paste resulted in lower values of Ra (0.14 μm ± 0.02 μm) and Rz (0.89 μm ± 0.18 μm) compared to the other groups. SEM analysis showed smoother and more homogeneous surfaces in the groups with prophylaxis compared to the groups without prophylaxis. There were no substantial differences between the results of applying different pastes. Conclusion The prophylaxis procedure performed with the experimental paste containing 3% hydroxyapatite reduced the roughness of root surfaces treated with HI, US and RI at the same level as the conventional prophylactic paste.

The Adjunctive Use of the Erbium, Chromium: Yttrium Scandium Gallium Garnet Laser in Closed Flap Periodontal Therapy. A Retrospective Cohort Study

Objectives:

The current periodontal literature has been inconsistent in finding an added advantage to using lasers in periodontal therapy. The aim of this study was to compare treatment outcomes following root surface instrumentation alone (NL group), or with adjunctive use of Erbium, Chromium: Yttrium Scandium Gallium Garnet (Er,Cr:YSGG) laser (L group).

Material and Methods:

Patients diagnosed with generalized chronic periodontitis, having a minimum of 1 year follow up were selected by a blinded party for inclusion in a retrospective analysis from patients treated prior to and after integration of laser in a single clinic setting. Probing depths (PD) of all sites ≥5 mm and full mouth bleeding scores were analyzed. Further analysis was carried out on the treatment outcomes of only the molar teeth and of pockets >6mm.

Results:

53 patients were included (25 NL,28 L). There was no significant difference between baseline PDs (NL=6.19mm, L=6.27mm, range 5-11mm). The mean PD after one year was 2.83mm (NL) 2.45mm (L), with the mean PD reductions being 3.35mm (NL) and 3.82mm (L) (p<0.002). The mean PD reduction for the molars were 3.32mm (NL) and 3.86mm (L) (p< 0.007), and for ≥7mm group were 4.75mm (NL) compared to 5.14mm (L) (p< 0.009). There was significantly less bleeding on probing in the laser group after one year (p<0.001)

Conclusion:

Both treatment modalities were effective in treating chronic periodontitis, but the added use of laser may have advantages, particularly in molar tooth sites and deeper pockets. Further research with RCTs is needed to test this hypothesis further.

Influence of Different Proportions of External Irrigation During the Er,Cr:YSGG Laser Irradiation on Wear and Roughness of Root Surface

INTRODUCTION

The aim of this study was to evaluate the influence of different levels of external irrigation during irradiation with an erbium, chromium: yttrium-scandium-gallium-garnet (Er,Cr:YSGG) laser on the roughness and wear of dental tissue during scaling procedures.

METHODS

Twenty-Five uniradicular bovine teeth had the proximal surfaces planed and divided into 3 regions: upper, middle and lower. The upper region was treated with hand instruments, the middle region was not treated and served as a control, and the lower region was treated by the Er,Cr:YSGG laser. The teeth were randomly divided into five groups according to the different proportions of external irrigation used during the laser irradiation: G1: 10%; G2: 20%; G3: 30%; G4: 40% and G5: 50%. The samples were analyzed for roughness and wear on the root surface irradiated with the laser.

RESULTS

There were no differences in the surface roughness and wear parameters between the groups irradiated with the laser, but the laser irradiation produced a rougher surface of the dentin than treatment with hand scaling.

CONCLUSION

Changes in the external irrigation level did not influence the wear and roughness of root surfaces treated with an Er,Cr:YSGG laser.

A microscopic analysis of the effects of root surface scaling with different power parameters of Er,Cr:YSGG laser

The aim of this study was to evaluate the effects of different power parameters of an Erbium, Cromium: Yttrium, Scandium, Gallium, Garnet laser (Er,Cr:YSGG laser) on the morphology, attachment of blood components (ABC), roughness, and wear on irradiated root surfaces. Sixty-five incisive bovine teeth were used in this study, 35 of which were used for the analysis of root surface morphology and ABC. The remaining 30 teeth were used for roughness and root wear analysis. The samples were randomly allocated into seven groups: G1: Er,Cr:YSGG laser, 0.5 W; G2: Er,Cr:YSGG laser, 1.0 W; G3: Er,Cr:YSGG laser, 1.5 W; G4: Er,Cr:YSGG laser, 2.0 W; G5: Er,Cr:YSGG laser, 2.5 W; G6: Er,Cr:YSGG laser, 3.0 W; G7: scaling and root planning (SRP) with manual curettes. The root surfaces irradiated by Er,Cr:YSGG at 1.0 W and scaling with manual curettes presented the highest degrees of ABC. The samples irradiated by the Er,Cr:YSGG laser were rougher than the samples treated by the manual curette, and increasing the laser power parameters caused more root wear and greater roughness on the root surface. The Er,Cr:YSGG laser is safe to use for periodontal treatment, but it is not appropriate to use irradiation greater than 1.0 W for this purpose.

Effect of Er,Cr:YSGG laser application in the treatment of experimental periodontitis

The purpose of this study was to evaluate the influence of an erbium, chromium:yttrium-scandium-gallium-garnet (Er,Cr:YSGG) laser in the absence or presence of manual scaling and root planning (SRP) for the treatment of induced periodontitis in rats. Ligatures were placed in the subgingival region of the maxillary first molar. After a 7-day period, the ligatures were removed, and 40 rats were randomly divided into four groups (G), as follows: (GI) no treatment, (GII) scaling and root planning (SRP) with curettes, (GIII) Er,Cr:YSGG laser irradiation and (GIV) SRP with curettes followed by Er,Cr:YSGG laser irradiation. Seven and 30 days after the treatment, the animals were sacrificed and histologic, histometric and immunohistochemistry analyses were performed. All groups showed similar histopathological characteristics during the evaluation period. The histometric analysis was confirmed using Bonferroni and paired t tests. At 7 and 30 days, groups II, III and IV exhibited greater bone formation in the furcation area when compared to group I (p < 0.0001; p < 0.05). During the 7-day period, the groups irradiated with the laser (III and IV) showed a statistically larger new bone area than the group treated with SRP (II) (p < 0.01). Immunohistochemistry analysis revealed that the control group exhibited a higher expression of tartrate-resistant acid phosphatase (TRAP) and the receptor activator of nuclear factor κΒ ligand (RANKL) when compared to groups II, III and IV (p < 0.05). All treatments were able to reduce the inflammatory processes, consequently enabling the repair of periodontal tissues. The results achieved with the application of the Er,Cr:YSGG laser suggest that this laser can stimulate greater bone formation, especially over a shorter period of time.

Effect of Er,Cr:YSGG and Er:YAG laser irradiation on the adhesion of blood components on the root surface and on root morphology

The aim of this study was to conduct an in vitro evaluation, by scanning electron microscopy (SEM), of the adhesion of blood components on root surfaces irradiated with Er,Cr:YSGG (2.78 µm) or Er:YAG (2.94 µm) laser, and of the irradiation effects on root surface morphology. Sixty samples of human teeth were previously scaled with manual instruments and divided into three groups of 20 samples each: G1 (control group) - no treatment; G2 - Er,Cr:YSGG laser irradiation; G3 - Er:YAG laser irradiation. After performing these treatments, blood tissue was applied to 10 samples of each group, whereas 10 samples received no blood tissue application. After performing the laboratory treatments, the samples were observed under SEM, and the resulting photomicrographs were classified according to a blood component adhesion scoring system and root morphology. The results were analyzed statistically (Kruskall-Wallis and Mann Whitney tests, α= 5%). The root surfaces irradiated with Er:YAG and Er,Cr:YSGG lasers presented greater roughness than those in the control group. Regarding blood component adhesion, the results showed a lower degree of adhesion in G2 than in G1 and G3 (G1 × G2: p = 0.002; G3 × G2: p = 0.017). The Er:YAG and Er,Cr:YSGG laser treatments caused more extensive root surface changes. The Er:YAG laser treatment promoted a greater degree of blood component adhesion to root surfaces, compared to the Er,Cr:YSGG treatment.