Penetrating the ultra-tough yeast cell wall with finite element analysis model-aided design of microtools

Microinjecting yeast cells has been challenging for decades with no significant breakthrough due to the ultra-tough cell wall and low stiffness of the traditional injector tip at the micro-scale. Penetrating this protection wall is the key step for artificially bringing foreign substance into the yeast. In this paper, a yeast cell model was built by using finite element analysis (FEA) method to analyze the penetrating process. The key parameters of the yeast cell wall in the model (the Young's modulus, the shear modulus, and the Lame constant) were calibrated according to a general nanoindentation experiment. Then by employing the calibrated model, the injection parameters were optimized to minimize the cell damage (the maximum cell deformation at the critical stress of the cell wall). Key guidelines were suggested for penetrating the cell wall during microinjection.

Mesoscopic Simulation for the Effect of Cross-Linking Reactions on the Drug Diffusion Properties in Microneedles

The drug diffusion issue in microneedles is the focus of its medical application. It will not only affect the distribution of drugs in the needle body but will also have an impact on the drug release performance of the microneedle. The utilization of cross-linked polymer materials to obtain the drug diffusion control has been experimentally verified as a feasible method. However, the mechanism research on the molecular level is still incomplete. In this study, the dissipative particle dynamics (DPD) simulation has been applied to study the effect of the cross-linking reaction on drug diffusion in hyaluronic acid microneedles. We have discovered that when the cross-linking degree reaches 90%, the diffusion coefficient of the drug is 6.45 times lower than that of the uncross-linked system. The main reason for the decline in drug diffusion ability is that the cross-linking reaction varies the conformation of the polymer. The amplification in the cross-linking degree makes the polymer coils more compact and approach each other, finally forming a continuously distributed cross-linked network, which reduces its degradation rate in the body. Simultaneously, these cross-linked networks can also hinder the interaction of soluble drugs with water, thereby preventing the premature release of drugs. The simulation results are consistent with the data collected in the previous microneedle experiment. This work will be an extension of DPD simulation in the application of biological materials.

Characterization of microneedles and microchannels for enhanced transdermal drug delivery

Microneedle (MN)-based technologies are currently one of the most innovative approaches that are being extensively investigated for transdermal delivery of low molecular weight drugs, biotherapeutic agents and vaccines. Extensive research reports, describing the fabrication and applications of different types of MNs, can be readily found in the literature. Effective characterization tools to evaluate the quality and performance of the MNs as well as for determination of the dimensional and kinetic properties of the microchannels created in the skin, are an essential and critical part of MN-based research. This review paper provides a comprehensive account of all such tools and techniques.

Mechanical characterization of a fiberoptic microneedle device for controlled delivery of fluids and photothermal excitation

Current clinical approaches for treating pancreatic cancer have been demonstrated as ineffective at improving midterm survival. A primary obstacle to local drug delivery is the desmoplastic nature of the peritumoral environment, which acts as a significant barrier to circulating macromolecules. To address this need, our group presents a sharp fiberoptic microcatheter capable of accessing the pancreas through transduodenal endoscope and penetrating a tumor to locally co-deliver photothermal and fluid-based therapies. Experiments sought to characterize the mechanical penetration capabilities and fluid mechanics of the fiberoptic microneedle design. A refined off-center fusion splicing technique was developed for joining a multimode fiber to the annular core of a light-guiding capillary, allowing light transmission with minimal optical loss. A novel and frugal technique for assessing the penetration force of the microneedle was conducted in a bovine gelatin tissue phantom with a Young's modulus stiffer than the high range for pancratic tissue or tumor. Buckling forces for different microneedle lengths were measured and compared against theoretical values obtained from Euler's Critical Load equation under fixed-pinned column conditions. Hydraulic resistance of different capillary lengths was evaluated and compared against the theoretical values from Hagen-Poiseuille's law, allowing assessment of contributions from different segments of the device. The results demonstrated that the microcatheter can robustly and repeatably penetrate a soft tissue phantom chosen to be a conservative model of pancreatic tissue for penetration properties. Experiments showed that a 1.5 N insertion force was required for phantom penetration with a 45° beveled needle at a 5 mm unsupported length, while the critical buckling load was measured to be approximately 4 N. In addition, the design was demonstrated to efficiently transport 1064 nm light and aqueous fluids with a 70-75% light coupling efficiency and 12,200 Pa.s/μl hydraulic resistance, respectively. These findings motivate the FMD's further development as a treatment platform for pancreatic cancer.

Polyethersulfone optical fibers with thermally induced microbubbles for custom side-scattering profiles

Polyethersulfone (PES) optical fibers are drawn and thermally processed in order to generate variable side-illumination profiles. The thermal treatment allows microbubbles to be formed in an outer layer of the PES fiber, providing light scattering with controllable amplitudes (0.25-2.5 cm^-1). Several fibers with different scattering profiles, such as uniform axial irradiation and multiple irradiation spots, are demonstrated. A small microbubble-induced scattering spot on the surface may be used for side-coupling of ambient light into the fiber. These mechanically flexible all-PES fibers with custom-designable scattering profiles may be useful for spatially tuned delivery of light for various applications, including phototherapy.