Alkaline Phosphatase Encapsulated in Gellan-Chitosan Hybrid Capsules

Nanostructured interfacial self-assembled peptide-polymer membranes for enhanced mineralization and cell adhesion

Soft interfacial materials, such as self-assembled polymer membranes, are gaining increasing interest as biomaterials since they can provide selective barriers and/or controlled affinity interactions important to regulate cellular processes. Herein, we report the design and fabrication of multiscale structured membranes integrating selective molecular functionalities for potential applications in bone regeneration. The membranes were obtained by interfacial self-assembly of miscible aqueous solutions of hyaluronan and multi-domain peptides (MDPs) incorporating distinct biochemical motifs, including mineralizing (EE), integrin-binding (RGDS) and osteogenic (YGFGG) peptide sequences. Circular dichroism and Fourier transform infrared spectroscopy analyses of the MDPs revealed a predominant β-sheet conformation, while transmission electron microscopy (TEM) showed the formation of fibre-like nanostructures with different lengths. Scanning electron microscopy (SEM) of the membranes showed an anisotropic structure and surfaces with different nanotopographies, reflecting the morphological differences observed under TEM. All the membranes were able to promote the deposition of a calcium-phosphate mineral on their surface when incubated in a mineralizing solution. The ability of the MDPs, coated on coverslips or presented within the membranes, to support cell adhesion was investigated using primary adult periosteum-derived cells (PDCs) under serum-free conditions. Cells on the membranes lacking RGDS remained round, while in the presence of RGDS they appear to be more elongated and anchored to the membrane. These observations were confirmed by SEM analysis that showed cells attached to the membrane and exhibiting an extended morphology with close interactions with the membrane surface. We anticipate that these molecularly designed interfacial membranes can both provide relevant biochemical signals and structural biomimetic components for stem cell growth and differentiation and ultimately promote bone regeneration.

Histochemical imaging of alkaline phosphatase using a novel fluorescent substrate

Histochemical visualization of phosphatase is exclusively required for Western immunoblotting and antigen-positive cell staining using an alkaline phosphatase (AP)-labeled secondary antibody. This detection has been performed by several reagents including 5-bromo-4-chloro-3-indolyl-phosphate (X-Phos), nitro blue tetrazolium (NBT), 3-(2'-spiroadamantane)-4-methoxy-4-(3″-phosphoryloxy)phenyl-1,2-dioxetane and 2-(5'-chloro-2'-phosphoryloxyphenyl)-6-chloro-4-[3H]-quinazolinone (ELF® 97 Phosphate). We previously reported that 2-(benzothiazol-2-yl)-4-bromophenol bonded with N-acetylneuraminic acid (BTP3-Neu5Ac), enabled fluorescent histochemical visualization of sialidase activity. 2-(Benzothiazol-2-yl)-4-bromophenol (BTP3), which is formed from BTP3-Neu5Ac by sialidase reaction, is a crystalline, insoluble and stable fluorogenic compound, deposited at the site of enzyme activity. We developed a BTP3 phosphate ester (BTP3-Phos) for the purpose of fluorescent histochemical visualization of phosphatase activity. BTP3-Phos emitted fluorescence in a manner dependent on the concentration of the AP-labeled antibody. BTP3-Phos also enabled fluorescent histochemical visualization of AP-blotted dots in a manner dependent on the concentration of the AP-labeled antibody. The detection sensitivity of BTP3-Phos was estimated to be greater than that of the conventional method using X-Phos and NBT. Influenza A virus-infected cells were fixed and reacted with anti-influenza A virus antibodies and incubated continuously with an AP-labeled secondary antibody. BTP3-Phos stained the infected cells with distinct green fluorescence. These results indicate that BTP3-Phos can enable fluorescent immunohistochemical staining analysis using an AP-labeled antibody. BTP3-Phos would be beneficial for histochemical staining of AP activity, and may be applicable for multi-color staining or a cell sorter.

Alginate-hydroxypropylcellulose hydrogel microbeads for alkaline phosphatase encapsulation

There is a growing interest in using proteins as therapeutics agents. Unfortunately, they suffer from limited stability and bioavailability. We aimed to develop a new delivery system for proteins. ALP, a model protein, was successfully encapsulated in the physically cross-linked sodium alginate/hydroxypropylcellulose (ALG-HPC) hydrogel microparticles. The obtained objects had regular, spherical shape and a diameter of ∼4 µm, as confirmed by optical microscopy and SEM analysis. The properties of the obtained microbeads could be controlled by temperature and additional coating or crosslinking procedures. The slow, sustained release of ALP in its active form with no initial burst effect was observed for chitosan-coated microspheres at pH = 7.4 and 37 °C. Activity of ALP released from ALG/HPC microspheres was confirmed by the occurance of effectively induced mineralization. SEM and AFM images revealed formation of the interpenetrated three-dimensional network of mineral, originating from the microbeads' surfaces. FTIR and XRD analyses confirmed formation of hydroxyapatite.

Self-destructing "mothership" capsules for timed release of encapsulated contents

We describe a new class of hierarchical containers that are formed via single-step assembly and, at a later time, self-destruct because of their packaged contents. These containers are spherical capsules formed by electrostatic complexation of the anionic biopolymer, gellan gum, with the cationic biopolymer, chitosan. The capsules are termed "motherships" and are engineered to carry a cargo of much smaller containers (e.g., nanoscale liposomes ("babyships")), within their lumen. Additionally, we package an enzyme, chitosanase, in the capsule that is capable of degrading polymeric chitosan into short oligomers. Thereby, we create motherships that self-destruct, liberating their cargo of babyships into the external solution. The time scale for self-destruction can be engineered based on the internal concentration of enzyme. The motherships are stable when stored in a freeze-dried form and can be readily dispersed into water or buffer solutions at a later time, whereupon their "internal clock" for self-destruction is initiated. The above concept could be useful for the triggered release of a variety of payloads including drugs, biological therapeutics, cosmetics, and flavor ingredients.

ATPase-coupled release control from polyion complex capsules encapsulating muscle proteins

In the present study, a muscle contractile protein complex, actomyosin, has been successfully encapsulated into gellan-chitosan polyion complex (PIC) capsules. The recovery of the myosin-ATPase activity is approximately 50% and the Mg2+-ATPase activity is stimulated by the presence of F-actin, which implies the formation of the actomyosin complex inside the capsule. Furthermore, encapsulation could protect the myosin, F-actin, and actomyosin inside from hydrolysis by proteases. Two small proteins, myoglobin and cytochrome c, have been used in the release tests. The release of myoglobin is not affected by the ionic strength of the external solution, while the release of cytochrome c increases with increasing ionic strength. The maximal releases are found in the external pH solution close to the isoelectric points of each protein. The Mg2+-ATP complex itself reduces the release percentages of the small proteins from the PIC capsule. The release amounts further decrease when coexisting with Mg2+-ATP and the encapsulated actomyosin, which indicates the release regulation by actomyosin. The present study suggests that the ATPase-coupled sliding motion of the myosin-F-actin filaments modifies the pore size of the polymer networks in the PIC capsule membranes.

Polysaccharide hydrogels for modified release formulations

Hydrogels are three-dimensional, hydrophilic, polymeric networks, with chemical or physical cross-links, capable of imbibing large amounts of water or biological fluids. Among the numerous macromolecules that can be used for hydrogel formation, polysaccharides are extremely advantageous compared to synthetic polymers being widely present in living organisms and often being produced by recombinant DNA techniques. Coming from renewable sources, polysaccharides also have frequently economical advantages over synthetic polymers. Polysaccharides are usually non-toxic, biocompatible and show a number of peculiar physico-chemical properties that make them suitable for different applications in drug delivery systems. We review here a selection of the most important polysaccharides that have been studied and exploited in several fields related to pharmaceutics. Particular attention has been focused on the techniques used for the hydrogel network preparation, on the drug delivery results, on clinical applications as well as on the possible use of such systems as scaffolds for tissue engineering.

Quantitative analysis of enzymatic assays using indoxyl-based substrates

Hydrolysis of indoxyl-based substrates by hydrolytic enzymes is a commonly used semiquantitative detection system that generates a water-insoluble indigo dye which is difficult to quantify. This work describes the quantitative analysis and enzyme kinetics for alkaline phosphatase (AP) and 5-bromo-4-chloro-3-indoxyl phosphate (BCIP) in solution obtained by applying known solubilization methodology from the textiles industry to the enzymatic product. This proposal is based on the reduction of the tetrahalo-indigo blue dye in a basic medium with the aim of generating its aqueous-soluble parent compound termed indigo white, which gives a rich yellow color in solution and is fluorescent. A quantitative ELISA (where a soluble end product is required) is accomplished for first time using BCIP as substrate.