Structure Design of Multifunctional Furoate and Pyroglutamate Esters of Dextran by Polymer-Analogous Reactions

Antibody-drug nanoparticle induces synergistic treatment efficacies in HER2 positive breast cancer cells

Chemotherapeutic drugs suffer from non-specific binding, undesired toxicity, and poor blood circulation which contribute to poor therapeutic efficacy. In this study, antibody–drug nanoparticles (ADNs) are engineered by synthesizing pure anti-cancer drug nanorods (NRs) in the core of nanoparticles with a therapeutic monoclonal antibody, Trastuzumab on the surface of NRs for specific targeting and synergistic treatments of human epidermal growth factor receptor 2 (HER2) positive breast cancer cells. ADNs were designed by first synthesizing ~ 95 nm diameter × ~ 500 nm long paclitaxel (PTX) NRs using the nanoprecipitation method. The surface of PTXNRs was functionalized at 2′ OH nucleophilic site using carbonyldiimidazole and conjugated to TTZ through the lysine residue interaction forming PTXNR-TTZ conjugates (ADNs). The size, shape, and surface charge of ADNs were characterized using scanning electron microscopy (SEM), SEM, and zeta potential, respectively. Using fluorophore labeling and response surface analysis, the percentage conjugation efficiency was found > 95% with a PTX to TTZ mass ratio of 4 (molar ratio ≈ 682). In vitro therapeutic efficiency of PTXNR-TTZ was evaluated in two HER2 positive breast cancer cell lines: BT-474 and SK-BR-3, and a HER2 negative MDA-MB-231 breast cancer cell using MTT assay. PTXNR-TTZ inhibited > 80% of BT-474 and SK-BR-3 cells at a higher efficiency than individual PTX and TTZ treatments alone after 72 h. A combination index analysis indicated a synergistic combination of PTXNR-TTZ compared with the doses of single-drug treatment. Relatively lower cytotoxicity was observed in MCF-10A human breast epithelial cell control. The molecular mechanisms of PTXNR-TTZ were investigated using cell cycle and Western blot analyses. The cell cycle analysis showed PTXNR-TTZ arrested > 80% of BT-474 breast cancer cells in the G2/M phase, while > 70% of untreated cells were found in the G0/G1 phase indicating that G2/M arrest induced apoptosis. A similar percentage of G2/M arrested cells was found to induce caspase-dependent apoptosis in PTXNR-TTZ treated BT-474 cells as revealed using Western blot analysis. PTXNR-TTZ treated BT-474 cells showed ~ 1.3, 1.4, and 1.6-fold higher expressions of cleaved caspase-9, cytochrome C, and cleaved caspase-3, respectively than untreated cells, indicating up-regulation of caspase-dependent activation of apoptotic pathways. The PTXNR-TTZ ADN represents a novel nanoparticle design that holds promise for targeted and efficient anti-cancer therapy by selective targeting and cancer cell death via apoptosis and mitotic cell cycle arrest.

Patterned dextran ester films as a tailorable cell culture platform

The elucidation of cell-surface interactions and the development of model platforms to help uncover their underlying mechanisms remains vital to the design of effective biomaterials. To this end, dextran palmitates with varying degrees of substitution were synthesised with a multipurpose functionality: an ability to modulate surface energy through surface chemistry, and an ideal thermal behaviour for patterning. Herein, dextran palmitate films are produced by spin coating, and patterned by thermal nanoimprint lithography with nano-to-microscale topographies. These films of moderately hydrophobic polysaccharide esters with low nanoscale roughness performed as well as fibronectin coatings in the culture of bovine aortic endothelial cells. Upon patterning, they display distinct regions of roughness, restricting cell adhesion to the smoothest surfaces, while guiding multicellular arrangements in the patterned topographies. The development of biomaterial interfaces through topochemical fabrication such as this could prove useful in understanding protein and cell-surface interactions.

Nanoparticles Based on Hydrophobic Polysaccharide Derivatives-Formation Principles, Characterization Techniques, and Biomedical Applications

Polysaccharide (PS) nanoparticles (NP) are fascinating materials that combine huge application potential with the unique beneficial features of natural biopolymers. Different types of PS-NP can be distinguished depending on the basic preparation principles (top-down vs bottom-up vs coating of nanomaterials) and the material from which they are obtained (native PS vs chemically modified PS derivatives vs nanocomposites). This review provides a comprehensive overview of an approach towards PS-NP that has gained rapidly increasing interest within the last decade; the nanoself-assembling of hydrophobic PS derivatives. This facile process is easy to perform and offers a broad structural diversity in terms of the PS backbone and the additional functionalities that can be introduced. Fundamental principles of different NP preparation techniques along with useful characterization methods are presented in this work. A comprehensive summary of PS-NP prepared by different techniques and with various PS backbones and types/amounts of hydrophobic substituents is given. The intention is to demonstrate how different parameters determine the size, size distribution, and zeta-potential of the particles. Moreover, application trends in biomedical areas are highlighted in which tailored functional PS-NP are evaluated and constantly developed further.

pH-Responsive Nanofibers for Precise and Sequential Delivery of Multiple Payloads

Effective combination therapies can be achieved by programming materials for controlling release sequence, timing, and dose of multiple payloads. Herein, we synthesize dextran esters by coesterification of dextran, which display responsive properties at a precise pH threshold between 5.0 and 7.0. Multilayers electrospun nanofibers are prepared so that three different payloads are entrapped in three different dextran esters. The release of the three drugs can be sequentially and independently activated by a gradual increase of pH value. Because both pH threshold and release kinetics are matching conditions encountered by aliments along the gastrointestinal tract, these dextran ester multilayer nanofibers are promising for oral drug delivery.

Reactive cellulose-based thin films – a concept for multifunctional polysaccharide surfaces

Reactive coatings of hydroxyethyl cellulose furoate in the form of thin films, suitable for the covalent immobilization of functional molecules, were developed and characterized in this work.

Enhanced dewatering of polyelectrolyte nanocomposites by hydrophobic polyelectrolytes

We demonstrate that increasing the hydrophobic environment around the charge center of a polyelectrolyte (PE) not only decreases the water content of an adsorbed PE layer but can even dewater up to ~50% of an initially hydrated substrate. The results of this work are expected to yield new stratagies to dewater PE systems and have potential applications in mineral recovery, paper manufacturing, and biomedical materials. Adsorption of a series of cationically derivatized dextran polyelectrolytes onto sulfated nanocrystalline cellulose (SNC) has been studied using quartz crystal microbalance with dissipation monitoring (QCM-D) and surface plasmon resonance (SPR). Synthesized samples of (N,N-dimethylamino)ethyldextran (DMAE-Dex), (N,N-diethylamino)ethyldextran (DEAE-Dex), and (N,N-diisopropylamino)ethyldextran (DIAE-Dex) had degrees of substitution (DS) ranging from 0.05 to 0.82. DMAE-Dex, DEAE-Dex, and DIAE-Dex all showed decreasing adsorption onto SNC and decreasing water content of the adsorbed film with increasing DS. Additionally, DEAE-Dex and DIAE-Dex films adsorbed onto SNC contained less water than DMAE-Dex films with the same DS. Interestingly, QCM-D results for high DS DIAE-Dex adsorbed onto SNC revealed mass loss, whereas SPR results clearly showed DIAE-Dex adsorbed. These observations were consistent with dehydration of the SNC substrate. This study indicates that the water content of the substrate could be tailored by controlling the DS and hydrophobic character of the adsorbed polyelectrolytes.

Preparation and characterization of nanoparticles based on dextran-drug conjugates

The presented concept combines the widely-established use of macromolecular prodrugs with nanoparticulate drug delivery devices. For this purpose, the water-soluble biopolymer dextran was functionalized with poorly water-soluble drugs (ibuprofen, naproxen) via in situ activation of the carboxylic groups with N,N(')-carbonyldiimidazole (CDI). The resulting hydrophobic derivatives self-assemble into nanoparticles with high loading efficiency during nanoprecipitation. The degree of substitution (DS) and the preparation technique strongly influence the size and the size distribution of the resulting nanoparticles. The particle suspensions remained stable over months in a pH value range between 4 and 11. Derivatives with high DS values are more stable against hydrolysis and after the addition of electrolytes than lowly substituted ones. Therefore, a defined tuning of the DS value may allow the adjustment of the pH-dependent hydrolysis rate and, hence, the release of the drugs.

Phospholipid-dextran with a single coupling point: a useful amphiphile for functionalization of nanomaterials

Nanomaterials hold much promise for biological applications, but they require appropriate functionalization to provide biocompatibility in biological environments. For noncovalent functionalization with biocompatible polymers, the polymer must also remain attached to the nanomaterial after removal of its excess to mimic the high-dilution conditions of administration in vivo. Reported here are the synthesis and utilization of singly substituted conjugates of dextran and a phospholipid (dextran-DSPE) as stable coatings for nanomaterials. Suspensions of single-walled carbon nanotubes were found not only to be stable to phosphate buffered saline (PBS), serum, and a variety of pH's after excess polymer removal, but also to provide brighter photoluminescence than carbon nanotubes suspended by poly(ethylene glycol)-DSPE. In addition, both gold nanoparticles (AuNPs) and gold nanorods (AuNRs) were found to maintain their dispersion and characteristic optical absorbance after transfer into dextran-DSPE and were obtained in much better yield than similar suspensions with PEG-phospholipid and commonly used thiol-PEG. These suspensions were also stable to PBS, serum, and a variety of pH's after removal of excess polymer. dextran-DSPE thus shows great promise as a general surfactant material for the functionalization of a variety of nanomaterials, which could facilitate future biological applications.