Functionalization of MWNTs with Hyperbranched PEI for Highly Selective Isolation of BSA

Geldanaycin-encapsulated magnetic nanoparticle for isolation of myosin in proteomics

The grafting of a drug molecule, i.e., geldanamycin (GA) onto polyethyleneimine (PEI)-coated magnetic nanoparticle produces a novel composite, GA@Fe3O4-NH2. The composite is confirmed by characterizations with FT-IR, Raman, SEM, EDS, VSM and TEM. Due to the high binding-affinity of GA with myosin heavy chain (MYH), GA@Fe3O4-NH2 exhibits excellent adsorption performance towards myosin. Consequently, a solid-phase extraction procedure is established for highly efficient and selective separation of myosin from pig heart extract. At pH 6.0, an adsorption efficiency of 97.1 % is achieved for treating 100 μg mL-1 myosin (0.1 mL) with 0.1 mg GA@Fe3O4-NH2 as adsorbent. The adsorption behavior of myosin onto GA@Fe3O4-NH2 fits Langmuir model, corresponding to a theoretical adsorption capacity of 518.1 mg g-1. The adsorbed myosin can be readily recycled by the SDS solution (1 %, m/m) with an elution efficiency of 91.8 %. According to circular dichroism spectroscopy, the conformational changes of myosin during adsorption and elution are reversible. For practical application, myosin is successfully isolated from the pig left ventricular protein extract with GA@Fe3O4-NH2, and SDS-PAGE and LC-MS/MS showed that myosin had high purity and a total of 716 proteins could be identified. Significantly, Geldamycin-encapsulated magnetic nanoparticle for the separation of myosin well exploits the potential of the nanomaterials modified by drug molecules in the separation and purification of target proteins.

The curious cases of nanoparticle induced amyloidosis during protein corona formation and anti-amyloidogenic nanomaterials: Paradox or prejudice?

Protein corona (PC) formation remains a major hurdle in the successful delivery of nanomedicines to the target sites. Interacting proteins have been reported to undergo structural changes on the nanoparticle (NP) surface which invariably impacts their biological activities. Such structural changes are the result of opening of more binding sites of proteins to adsorb on the NP surface. The process of conversion of α-helix proteins to their β-sheet enriched counterpart is termed as amyloidosis and in case of PC formation, NPs apparently play the crucial role of being the nucleation centres where this process takes place. Conversely, increasing numbers of artificial nano-chaperones are being used to treat the protein misfolding disorders. Anti-amyloidogenic nanomaterials (NM) have been gaining utmost importance in inhibiting Aβ42 (hallmark peptide for Alzheimer's disease) and Hen egg white lysozyme (HEWL, model protein for systemic amyloidosis) aggregation. Interestingly, in this process, NPs inhibit protein β-sheet enrichment. These two seemingly opposite roles of NPs, propelling confirmatory change onto the smorgasbord of adsorbed native proteins and the ability of NPs in inhibiting amyloidosis creates a paradox, which has not been discussed earlier. Here, we highlight the key points from both the facets of the NP behaviour with respect to their physicochemical properties and the nature of proteins they adsorb onto them to unravel the mystery. BRIEF: Protein corona formation remains a major hurdle in achieving the desired efficacy of nanomedicine. Proteins when interact with nanoparticle (NP) surface, undergo both structural and biological changes. Again, NPs are known to exhibit anti-amyloidogenic behaviour where these play the crucial role of preventing any change in their native structure. Such seemingly different roles of NPs need sincere inquisition.

Cytotoxicity Effects of Water-Soluble Multi-Walled Carbon Nanotubes Decorated with Quaternized Hyperbranched Poly(ethyleneimine) Derivatives on Autotrophic and Heterotrophic Gram-Negative Bacteria

Oxidized multi-walled carbon nanotubes (oxCNTs) were functionalized by a simple non-covalent modification procedure using quaternized hyperbranched poly(ethyleneimine) derivatives (QPEIs), with various quaternization degrees. Structural characterization of these hybrids using a variety of techniques, revealed the successful and homogenous anchoring of QPEIs on the oxCNTs' surface. Moreover, these hybrids efficiently dispersed in aqueous media, forming dispersions with excellent aqueous stability for over 12 months. Their cytotoxicity effect was investigated on two types of gram(-) bacteria, an autotrophic (cyanobacterium Synechococcus sp. PCC 7942) and a heterotrophic (bacterium Escherichia coli). An enhanced, dose-dependent antibacterial and anti-cyanobacterial activity against both tested organisms was observed, increasing with the quaternization degree. Remarkably, in the photosynthetic bacteria it was shown that the hybrid materials affect their photosynthetic apparatus by selective inhibition of the Photosystem-I electron transport activity. Cytotoxicity studies on a human prostate carcinoma DU145 cell line and 3T3 mouse fibroblasts revealed that all hybrids exhibit high cytocompatibility in the concentration range, in which they also exhibit both high antibacterial and anti-cyanobacterial activity. Thus, QPEI-functionalized oxCNTs can be very attractive candidates as antibacterial and anti-cyanobacterial agents that can be used for potential applications in the disinfection industry, as well as for the control of harmful cyanobacterial blooms.

Ultra-facile and rapid colorimetric detection of Cu2+ with branched polyethylenimine in 100% aqueous solution

An ultra-facile and rapid colorimetric method was explored to detect Cu²⁺ in 100% aqueous solution by using only BPEI.

Architecture, Assembly, and Emerging Applications of Branched Functional Polyelectrolytes and Poly(ionic liquid)s

Branched polyelectrolytes with cylindrical brush, dendritic, hyperbranched, grafted, and star architectures bearing ionizable functional groups possess complex and unique assembly behavior in solution at surfaces and interfaces as compared to their linear counterparts. This review summarizes the recent developments in the introduction of various architectures and understanding of the assembly behavior of branched polyelectrolytes with a focus on functional polyelectrolytes and poly(ionic liquid)s with responsive properties. The branched polyelectrolytes and poly(ionic liquid)s interact electrostatically with small molecules, linear polyelectrolytes, or other branched polyelectrolytes to form assemblies of hybrid nanoparticles, multilayer thin films, responsive microcapsules, and ion-conductive membranes. The branched structures lead to unconventional assemblies and complex hierarchical structures with responsive properties as summarized in this review. Finally, we discuss prospectives for emerging applications of branched polyelectrolytes and poly(ionic liquid)s for energy harvesting and storage, controlled delivery, chemical microreactors, adaptive surfaces, and ion-exchange membranes.

A tumoral acidic pH-responsive drug delivery system based on a novel photosensitizer (fullerene) for in vitro and in vivo chemo-photodynamic therapy

Fullerene has shown great potential both in drug delivery and photodynamic therapy. Herein, we developed a doxorubicin (DOX)-loaded poly(ethyleneimine) (PEI) derivatized fullerene (C60-PEI-DOX) to facilitate combined chemotherapy and photodynamic therapy in one system, and DOX was covalently conjugated onto C60-PEI by the pH-sensitive hydrazone linkage. The release profiles of DOX from C60-PEI-DOX showed a strong dependence on the environmental pH value. The biodistributions of C60-PEI-DOX were investigated by injecting CdSe/ZnS (Qds) labeled conjugates (C60-PEI-DOX/Qds) into tumor-bearing mice. C60-PEI-DOX/Qds showed a higher tumor targeting efficiency compared with Qds alone. Compared with free DOX in an in vivo murine tumor model, C60-PEI-DOX afforded higher antitumor efficacy without obvious toxic effects to normal organs owing to its good tumor targeting efficacy and the 2.4-fold greater amount of DOX released in the tumor than in the normal tissues. C60-PEI-DOX also showed high antitumor efficacy during photodynamic therapy. The ability of C60-PEI-DOX nanoparticles to combine local specific chemotherapy with external photodynamic therapy significantly improved the therapeutic efficacy of the cancer treatment, the combined treatment demonstrating a synergistic effect. These results suggest that C60-PEI-DOX may be promising for high treatment efficacy with minimal side effects in future therapy.

Quantum dots conjugated with Fe3O4-filled carbon nanotubes for cancer-targeted imaging and magnetically guided drug delivery

A novel and specific nanoplatform for in vitro simultaneous cancer-targeted optical imaging and magnetically guided drug delivery is developed by conjugating CdTe quantum dots with Fe(3)O(4)-filled carbon nanotubes (CNTs) for the first time. Fe(3)O(4) is filled into the interior of the CNTs, which facilitates magnetically guided delivery and improves the synergetic targeting efficiency. In comparison with that immobilized on the external surface of CNTs, the magnetite nanocrystals inside the CNTs protect it from agglomeration, enhance its chemical stability, and improve the drug loading capacity. It also avoids magnetic nanocrystals-induced quenching of fluorescence of the quantum dots. The SiO(2)-coated quantum dots (HQDs) attached on the surface of CNTs exhibit favorable fluorescence as the hybrid SiO(2) shells on the QDs surface prevent its fluorescence quenching caused by the CNTs. In addition, the hybrid SiO(2) shells also mitigate the toxicity of the CdTe QDs. By coating transferrin on the surface of the herein modified CNTs, it provides a dual-targeted drug delivery system to transport the doxorubicin hydrochloride (DOX) into Hela cells by means of an external magnetic field. The nanocarrier based on the multifunctional nanoplatform exhibits an excellent drug loading capability of ca. 110%, in addition to cancer-targeted optical imaging as well as magnetically guided drug delivery.

Arsenic sorption and speciation with branch-polyethyleneimine modified carbon nanotubes with detection by atomic fluorescence spectrometry

Multi-wall carbon nanotubes (MWNTs) are modified with branched cationic polyethyleneimine (BPEI). The MWNTs-BPEI nanocomposites serve as a novel adsorbent and exhibit favorable selectivity toward adsorption of As(V). Appropriate amount of MWNTs-BPEI suspension containing ca. 5 mg of the composites is used to pack a mini-column for on-line solid phase extraction preconcentration of inorganic arsenic in a sequential injection system, following detection by hydride generation atomic fluorescence spectrometry. At pH 5.8, an sorption efficiency of 80% is achieved for As(V) at 10 μg L(-1), resulting in a sorption capacity of 26.18 mg g(-1). Meanwhile, the sorption efficiency for As(III) is <5%. The retained As(V) is readily recovered by 100 μL NH4HCO3 (0.6%, m/v). With a sample volume of 2.0 mL, an enrichment factor of 16.3 for As(V) is obtained along with a detection limit of 14 ng L(-1) within a linear range of 0.05-1.50 μg L(-1). A RSD of 3.6% is derived at 0.5 μg L(-1). Total amount of arsenic is obtained by converting As(III) to As(V) and following the same procedure. The speciation of inorganic arsenic is realized by difference. This procedure is validated by analyzing a certified reference material of human hair (GBW09101), achieving satisfactory agreements between the certified and the obtained values. Speciation of As(V) and As(III) is also performed in snow water and rain water samples.

Interaction of polyethyleneimine-functionalized ZnO nanoparticles with bovine serum albumin

In biological fluids, nanoparticles are always surrounded by proteins. As the protein is adsorbed on the surface, the extent of adsorption and the effect on the protein conformation and stability are dependent on the chemical nature, shape, and size of the nanoparticle (NP). We have carried out a detailed investigation on the interaction of bovine serum albumin (BSA) with polyethyleneimine-functionalized ZnO nanoparticles (ZnO-PEI). ZnO-PEI was synthesized using a wet chemical method with a core size of ~3-7 nm (from transmission electron microscopy). The interaction of BSA with ZnO-PEI was examined using a combination of calorimetric, spectroscopic, and computational techniques. The binding was studied by ITC (isothermal titration calorimetry), and the result revealed that the complexation is enthalpy-driven, indicating the possible involvement of electrostatic interaction. To investigate the nature of the interaction and the location of the binding site, a detailed domain-wise surface electrostatic potential calculation was performed using adaptive Poisson-Boltzmann software (APBS). The result shows that the protein surface can bind the nanoparticle. On binding ZnO-PEI, the protein gets destabilized to some extent, as displayed by CD (circular dichroism) and FTIR (Fourier transform infrared) spectroscopy. Chemical and thermal denaturation of BSA, when carried out in the presence of ZnO-PEI, also indicated a small perturbation in the protein structure. A comparison of the enthalpy and entropy components of binding with those derived for the interaction of BSA with ZnO nanoparticles explains the effect of hydrophilic cationic species attached on the NP surface. The effect of the NP surface modification on the structure and stability of BSA would find useful applications in nanobiotechnology.

Nanoparticle-based microextraction techniques in bioanalysis

Nanoparticles (NPs) have attracted a great deal of attention in the last decade due to their exceptional mechanical, optical and electronic properties. This article deals with the use of NPs as probes for the extraction of biomolecules from biological samples. In this context, NPs present some advantages compared with conventional sorbents. Their high surface-to-volume ratio, easy synthetic (especially for inorganic NPs) and derivatization procedures, and their biocompatibility make them a powerful alternative. In order to provide a systematic approach to the topic, NPs have been divided into two general groups attending to their chemical nature. Carbon-based (e.g., fullerene and nanotubes) and inorganic NPs (e.g., gold and magnetic NPs) are considered in depth, explaining their main properties and applications. After these critical considerations, the most important conclusions and essential trends in this field are also outlined.

Surface modification of carbon nanotubes with dendrimers or hyperbranched polymers

The different methods for modification of carbon nanotubes with dendrimers or hyperbranched polymers are summarized, and recent development is highlighted by discussing some representative examples in detail.