Effects of physical and chemical treatments on the molecular weight and degradation of alginate-hydroxyapatite composites

Biodegradable composites with antibiotics and growth factors for dual release kinetics

Bone infections are still a major problem in surgery. To avoid severe side effects of systemically administered antibiotics, local antibiotic therapy is increasingly being considered. Using a pressure-based method developed in our group, microporous β-TCP ceramics, which had previously been characterized, were loaded with 2% w/v alginate containing 50 mg/mL clindamycin and 10 µg/mL rhBMP-2. Release experiments were then carried out over 28 days with changes of liquid at defined times (1, 2, 3, 6, 9, 14, 21 and 28d). The released concentrations of clindamycin were determined by HPLC and those of rhBMP-2 by ELISA. Continuous release (anomalous transport) of clindamycin and uniform release (Fick's diffusion) of BMP-2 were determined. The composites were biocompatible (live/dead, WST-I and LDH) and the released concentrations were all antimicrobially active against Staph. aureus. The results were very promising and clindamycin was detected in concentrations above the MIC as well as a constant rhBMP-2 release over the entire study period. Biocompatibility was also not impaired by either the antibiotic or the BMP-2. This promising approach can therefore be seen as an alternative to the common treatment with PMMA chains containing gentamycin, as the new composite is completely biodegradable and no second operation is necessary for removal or replacement.

Histological Evaluation of Restylane Lyft Used as a Scaffold for Dental Pulp Regeneration in Non-Infected Immature Teeth in Dogs

Commercially available hyaluronic acid dermal fillers used as a scaffold in regenerative endodontic procedures (REPs) have demonstrated attractive potentials. This study aimed to histologically evaluate the outcome of REPs using Restylane Lyft (HA) as a scaffold. REPs were performed on pulpless, immature roots in dogs (n = 69). The roots were divided into four groups: blood clot (BC), Restylane Lyft (BC + HA), negative control, and positive control. At 13 weeks postoperatively, hard tissue formation, vascularization, the presence of vascularized soft connective tissue and collagen fibers, the degree of inflammation within pulp spaces and/or periapical tissues, and apical closure were evaluated histologically. The vascularization and formation of loosely arranged collagen fibers within the regenerated soft connective tissues were observed significantly more in the BC+HA group (85% and 40%, respectively; p < 0.05) compared to the BC group (54.6% and 9.1%, respectively; p < 0.05). The degree of inflammation was significantly higher in the HA group than in the BC group; moderate to severe inflammatory cell infiltration was seen in 45% and 13.6% of the cases, respectively. The results of the present study suggest that Restylane Lyft combined with a blood clot used as a scaffold may improve the outcomes of REPs in non-infected, pulpless, immature teeth in dogs.

Evaluation of a hyaluronic acid hydrogel (Restylane Lyft) as a scaffold for dental pulp regeneration in a regenerative endodontic organotype model

Scaffolds are crucial elements for dental pulp regeneration. Most of the currently used scaffolds in regenerative endodontic procedures (REPs) are unsuitable for chairside clinical use. This study aimed to evaluate the effect of an injectable synthetic scaffold (Restylane Lyft) on human bone marrow mesenchymal stem cell (hBMSC) viability, proliferation, and osteo/dentinogenic differentiation in a regenerative endodontic organotype model (REM). hBMSC were loaded in an REM either alone (hBMSC group) or mixed with the Restylane Lyft scaffold (Restylane/hBMSC group) and cultured in basal culture medium (n = 9/group). hMSC on culture plates served as controls. Cell viability and proliferation were measured using AlamarBlue assay. The loaded REM was cultured in an osteogenic differentiation medium to measure alkaline phosphatase activity (ALP) and examine the expression of the osteo/dentinogenic markers using real-time reverse transcriptase polymerase chain reaction. Cell viability in all groups increased significantly over 5 days. The Restylane/hBMSC group showed significantly higher ALP activity and dentin sialophosphoprotein, osteocalcin, and bone sialoprotein genes expression than the hBMSC and the control groups. Restylane Lyft, a hyaluronic acid (HA) injectable, FDA-approved hydrogel, maintained cell viability and proliferation and promoted osteo/dentinogenic differentiation of hBMSC when cultured in an REM. Henceforth, it could be a promising chairside scaffold material for REPs.

Hyaluronic acid-based interpenetrating network hydrogel as a cell carrier for nucleus pulposus repair

Hyaluronic acid (HA) is a key component of the intervertebral disc (IVD) that is widely investigated as an IVD biomaterial. One persisting challenge is introducing materials capable of supporting cell encapsulation and function, yet with sufficient mechanical stability. In this study, a hybrid interpenetrating polymer network (IPN) was produced as a non-covalent hydrogel, based on a covalently cross-linked HA (HA-BDDE) and HA-poly(N-isopropylacrylamide) (HA-pNIPAM). The hybrid IPN was investigated for its physicochemical properties, with histology and gene expression analysis to determine matrix deposition in vitro and in an ex vivo model. The IPN hydrogel displayed cohesiveness for at least one week and rheological properties resembling native nucleus pulposus (NP) tissue. When implanted in an ex vivo IVD organ culture model, the IPN supported cell viability, phenotype expression of encapsulated NP cells and IVD matrix production over four weeks under physiological loading. Overall, our results indicate the therapeutic potential of this HA-based IPN hydrogel for IVD regeneration.

Low-energy X-ray inactivation of Listeria monocytogenes in mono-/co-culture biofilms with Pseudomonas fluorescens on food contact surfaces

This study assessed the inactivation kinetics of 150 keV low-energy X-ray on mono-/co-culture biofilms of Listeria monocytogenes and Pseudomonas fluorescens on three different food-contact-surfaces (polyethylene, acrylic, and stainless steel). The results indicated that the level of biofilm formation of mono-/co-cultures of L. monocytogenes and P. fluorescens was the highest on acrylic. The mono-culture L. monocytogenes biofilm cells exhibited higher resistance to the low-energy X-rays than the corresponding mono-culture P. fluorescens biofilm cells, regardless of surface types. Furthermore, co-culture had enhanced the resistance of both P. fluorescens and L. monocytogenes biofilm cells to the low-energy X-ray. Two kinetic models for the inactivation process were investigated, including (i) Linear model and (ii) Weibull model. Based on R², RMSE and AIC analysis, the Weibull model was superior in fitting the inactivation curves of low-energy X-ray on L. monocytogenes in mono-/co-culture biofilms with P. fluorescens. For mono-culture biofilms, the irradiation achieved the t_R1 value (derived from the Weibull model, i.e., the dose required for the first 1-log reduction) of 46.36-50.81 Gy for L. monocytogenes and the t_R1 value of 25.61-31.33 Gy for P. fluorescens. For co-culture biofilms, higher t_R1 values for L. monocytogenes (59.54-70.77 Gy) and P. fluorescens (32.73-45.13 Gy) were yielded than those for their individual counterparts in mono-culture biofilm.

Influence of the geometry of nanostructured hydroxyapatite and alginate composites in the initial phase of bone repair1

Purpose

To analyze, histomorphologically, the influence of the geometry of nanostructured hydroxyapatite and alginate (HAn/Alg) composites in the initial phase of the bone repair.

Methods

Fifteen rats were distributed to three groups: MiHA - bone defect filled with HAn/Alg microspheres; GrHA - bone defect filled with HAn/Alg granules; and DV - empty bone defect; evaluated after 15 days postoperatively. The experimental surgical model was the critical bone defect, ≅8.5 mm, in rat calvaria. After euthanasia the specimens were embedded in paraffin and stained with hematoxylin and eosin, picrosirius and Masson-Goldner’s trichrome.

Results

The histomorphologic analysis showed, in the MiHA, deposition of osteoid matrix within some microspheres and circumjacent to the others, near the bone edges. In GrHA, the deposition of this matrix was scarce inside and adjacent to the granules. In these two groups, chronic granulomatous inflammation was noted, more evident in GrHA. In the DV, it was observed bone neoformation restricted to the bone edges and formation of connective tissue with reduced thickness in relation to the bone edges, throughout the defect.

Conclusion

The geometry of the biomaterials was determinant in the tissue response, since the microspheres showed more favorable to the bone regeneration in relation to the granules.

pH and reduction-activated polymeric prodrug nanoparticles based on a 6-thioguanine-dialdehyde sodium alginate conjugate for enhanced intracellular drug release in leukemia

Synthesis schematics of DSA and 6-TG-DSA as well as processes of PPN self-assembly and its pH/GSH dual stimuli-response release of the conjugated 6-TG.

Improved Sterilization of Sensitive Biomaterials with Supercritical Carbon Dioxide at Low Temperature

The development of bio-resorbable implant materials is rapidly going on. Sterilization of those materials is inevitable to assure the hygienic requirements for critical medical devices according to the medical device directive (MDD, 93/42/EG). Biopolymer-containing biomaterials are often highly sensitive towards classical sterilization procedures like steam, ethylene oxide treatment or gamma irradiation. Supercritical CO₂ (scCO₂) treatment is a promising strategy for the terminal sterilization of sensitive biomaterials at low temperature. In combination with low amounts of additives scCO₂ treatment effectively inactivates microorganisms including bacterial spores. We established a scCO₂ sterilization procedure under addition of 0.25% water, 0.15% hydrogen peroxide and 0.5% acetic anhydride. The procedure was successfully tested for the inactivation of a wide panel of microorganisms including endospores of different bacterial species, vegetative cells of gram positive and negative bacteria including mycobacteria, fungi including yeast, and bacteriophages. For robust testing of the sterilization effect with regard to later application of implant materials sterilization all microorganisms were embedded in alginate/agarose cylinders that were used as Process Challenge Devices (PCD). These PCD served as surrogate models for bioresorbable 3D scaffolds. Furthermore, the impact of scCO₂ sterilization on mechanical properties of polysaccharide-based hydrogels and collagen-based scaffolds was analyzed. The procedure was shown to be less compromising on mechanical and rheological properties compared to established low-temperature sterilization methods like gamma irradiation and ethylene oxide exposure as well as conventional steam sterilization. Cytocompatibility of alginate gels and scaffolds from mineralized collagen was compared after sterilization with ethylene oxide, gamma irradiation, steam sterilization and scCO₂ treatment. Human mesenchymal stem cell viability and proliferation were not compromised by scCO₂ treatment of these materials and scaffolds. We conclude that scCO₂ sterilization under addition of water, hydrogen peroxide and acetic anhydride is a very effective, gentle, non-cytotoxic and thus a promising alternative sterilization method especially for biomaterials.