Three-Layered Biodegradable Micelles Prepared by Two-Step Self-Assembly of PLA-PEI-PLA and PLA-PEG-PLA Triblock Copolymers as Efficient Gene Delivery System

Design and synthesis of multi-targeted nanoparticles for gene delivery to breast cancer tissues

Biocompatibility of nanoparticles is the most essential factor in their use in clinical applications. In this study, hyperbranched spermine (HS), hyperbranched spermine-polyethylene glycol-folic acid (HSPF), and hyperbranched spermine-polyethylene glycol-glucose (HSPG) were synthesized for DNA protection and gene delivery to breast cancer cells. The synthesis of HSPG and HSPF was confirmed using proton nuclear magnetic resonance (H-NMR), Fourier-transform infrared spectroscopy (FTIR), and thermogravimetric analysis (TGA) spectroscopy. The HS/DNA, HSPF/DNA, HSPG/DNA, and hyperbranched spermine-polyethylene glycol-folic acid/glucose/DNA (HSPFG/DNA) nanoparticles were prepared by combining different concentrations of HS, HSPF, and HSPG with the same amount of DNA. The ability of HS, HSPF, and HSPG to interact with DNA and protect it against plasm digestion was evaluated using agarose gel. Moreover, in vivo and in vitro biocompatibility of HSPF/DNA, HSPG/DNA, and HSPFG/DNA was investigated using MTT assay and calculating weight change and survival ratio of BALB/c mice, respectively. The results of agarose gel electrophoresis showed that HS, HSPF, and HSPG have the high ability to neutralize the negative charge of DNA and protect it against plasma degradation. The results of in vivo cytotoxicity assay revealed that the HSPF/DNA, HSPG/DNA, and HSPFG/DNA nanoparticles have good biocompatibility on female BALB/c mice. In vitro and in vivo transfection assays revealed that functionalization of the surface of HS using polyethylene glycol-folic acid (HSPF) and polyethylene glycol-glucose (HSPG) significantly increases gene delivery efficiency in vitro and in vivo. These results also showed that gene transfer using both HSPF and HSPG copolymers increases gene transfer efficiency compared to when only one of them is used. The HSPFG/DNA nanoparticles have a high potential for use in therapeutic applications because of their excellent biocompatibility and high gene transfer efficiency to breast cancer tissue.

Fabrication and Biological Activities of Plasmid DNA Gene Carrier Nanoparticles Based on Biodegradable l-Tyrosine Polyurethane

Gene therapy is a suitable alternative to chemotherapy due to the complications of drug resistance and toxicity of drugs, and is also known to reduce the occurrence of cellular mutation through the use of gene carriers. In this study, gene carrier nanoparticles with minimal toxicity and high transfection efficiency were fabricated from a biocompatible and biodegradable polymer, l-tyrosine polyurethane (LTU), which was polymerized from presynthesized desaminotyrosyl tyrosine hexyl ester (DTH) and polyethylene glycol (PEG), by using double emulsion and solvent evaporation techniques, resulting in the formation of porous nanoparticles, and then used to evaluate their potential biological activities through molecular controlled release and transfection studies. To assess cellular uptake and transfection efficiency, two model drugs, fluorescently labeled bovine serum albumin (FITC-BSA) and plasmid DNA-linear polyethylenimine (LPEI) complex, were successfully encapsulated in nanoparticles, and their transfection properties and cytotoxicities were evaluated in LX2 as a normal cell and in HepG2 and MCF7 as cancer cells. The morphology and average diameter of the LTU nanoparticles were confirmed using light microscopy, transmission electron microscopy, and dynamic light scattering, while confocal microscopy was used to validate the cellular uptake of FITC-BSA-encapsulated LTU nanoparticles. Moreover, the successful cellular uptake of LTU nanoparticles encapsulated with pDNA-LPEI and the high transfection efficiency, confirmed by gel electrophoresis and X-gal assay transfection, indicated that LTU nanoparticles had excellent cell adsorption ability, facilitated gene encapsulation, and showed the sustained release tendency of genes through transfection experiments, with an optimal concentration ratio of pDNA and LPEI of 1:10. All the above characteristics are ideal for gene carriers designed to transport and release drugs into the cytoplasm, thus facilitating effective gene therapy.

Construction of an Effective Delivery System for DNA Vaccines Using Biodegradable Polylactic Acid Based Microspheres

Nanotechnology represents a new impetus for biomedical research applications, especially using nanotechnology to formulate microspheres or nanospheres based delivery system for treatment of infectious diseases in animals. In this work, polylactic acid (PLA) microspheres with an average size of 156 nm were prepared by combining emulsion polymerization coupled with emulsion-solvent evaporation. Coating with polyethylenimine (PEI) polymers increased the surface charges of the resulting PLA/PEI microspheres, thus enabled plasmid DNA to adsorb tightly to the microspheres. As expected, the plasmid DNA was successfully transferred into the pig kidney-15 cells with high transfection efficiency. In addition, the protection rate of PLA/PEI microspheres loaded with DNA vaccine against foot-and-mouth disease in guinea pigs reached 87.5%, which was significantly higher than that of the pure DNA vaccine group. These results indicated that PLA/PEI microspheres were expected to be an effective delivery system for DNA vaccines.

Design and preparation of a new multi-targeted drug delivery system using multifunctional nanoparticles for co-delivery of siRNA and paclitaxel

Drug resistance is a great challenge in cancer therapy using chemotherapeutic agents. Administration of these drugs with siRNA is an efficacious strategy in this battle. Here, the present study tried to incorporate siRNA and paclitaxel (PTX) simultaneously into a novel nanocarrier. The selectivity of carrier to target cancer tissues was optimized through conjugation of folic acid (FA) and glucose (Glu) onto its surface. The structure of nanocarrier was formed from ternary magnetic copolymers based on FeCo-polyethyleneimine (FeCo-PEI) nanoparticles and polylactic acid-polyethylene glycol (PLA-PEG) gene delivery system. Biocompatibility of FeCo-PEI-PLA-PEG-FA(NPsA), FeCo-PEI-PLA-PEG-Glu (NPsB) and FeCo-PEI-PLA-PEG-FA/Glu (NPsAB) nanoparticles and also influence of PTX-loaded nanoparticles on in vitro cytotoxicity were examined using MTT assay. Besides, siRNA-FAM internalization was investigated by fluorescence microscopy. The results showed the blank nanoparticles were significantly less cytotoxic at various concentrations. Meanwhile, siRNA-FAM/PTX encapsulated nanoparticles exhibited significant anticancer activity against MCF-7 and BT-474 cell lines. NPsAB/siRNA/PTX nanoparticles showed greater effects on MCF-7 and BT-474 cells viability than NPsA/siRNA/PTX and NPsB/siRNA/PTX. Also, they induced significantly higher anticancer effects on cancer cells compared with NPsA/siRNA/PTX and NPsB/siRNA/PTX due to their multi-targeted properties using FA and Glu. We concluded that NPsAB nanoparticles have a great potential for co-delivery of both drugs and genes for use in gene therapy and chemotherapy.

Polymeric delivery systems for nucleic acid therapeutics: Approaching the clinic

Gene therapy using nucleic acids has many clinical applications for the treatment of diseases with a genetic origin as well as for the development of innovative vaccine formulations. Since nucleic acids in their free form are rapidly degraded by nucleases present in extracellular matrices, have poor pharmacokinetics and hardly pass cellular membranes, carrier systems are required. Suitable carriers that protect the nucleic acid payload against enzymatic attack, prolong circulation time after systemic administration and assist in cellular binding and internalization are needed to develop nucleic acid based drug products. Viral vectors have been investigated and are also clinically used as delivery vehicles. However, some major drawbacks are associated with their use. Therefore there has been substantial attention on the use of non-viral carrier systems based on cationic lipids and polymers. This review focuses on the properties of polymer-based nucleic acid formulations, also referred as polyplexes. Different polymeric systems are summarized, and the cellular barriers polyplexes encounter and ways to tackle these are discussed. Finally attention is given to the clinical status of non-viral nucleic acid formulations.

High Molecular Weight Poly(ethylenimine)-Based Water-Soluble Lipopolymer for Transfection of Cancer Cells

Over the past decade, search for novel materials for nucleic acid delivery has prompted a special interest in polymeric nanoparticles (NPs). In this study, the biological applicability of a water-soluble cationic lipopolymer (WSLP) obtained by the modification of high molecular weight branched poly(ethylenimine) (PEI) with cholesteryl chloroformate is characterized and assessed for better cellular membrane permeability. To test the delivery efficiency of the produced lipopolymer, plasmid DNA (pDNA) encoding the enhanced green fluorescent protein and WSLP are mixed at different charge ratios. WSLP and WSLP/pDNA complexes are characterized by dynamic and static light scattering, particle charge detection, scanning electron microscopy, and transmission electron microscopy. The pDNA loading of WSLP is also verified by agarose gel electrophoresis. Cytotoxicity of PEI, WSLP, and of WSLP/pDNA is evaluated on human A549 and HeLa cells. A remarkable dependence of the toxicity on the dose, cholesterylation, and charge ratio is detected. Transfection is monitored by flow cytometry and by fluorescence microscopy. Importantly, cholesterylation decreases the toxicity of the polymer, while promoting high transfection efficiency in both cell lines. This work indicates a possible optimization mode of the high molecular weight PEI-based WSLP rendering it a promising candidate for gene delivery.

Kidney-targeted rhein-loaded liponanoparticles for diabetic nephropathy therapy via size control and enhancement of renal cellular uptake

The optimization of nanoparticle size for passing through glomerular filtration membrane, inefficient renal cellular uptake and rapid urinary excretion of nanoparticles are the major obstacles for renal disease treatment via a nanoparticle delivery system. Herein, we propose a concept of a two-step nanoparticular cascade of size control and enhancement of renal cellular uptake to overcome the renal delivery obstacles. Methods: We prepared kidney-targeted rhein (RH)-loaded liponanoparticles (KLPPR) with a yolk-shell structure composed by polycaprolactone-polyethyleneimine (PCL-PEI)-based cores and kidney targeting peptide (KTP)-modified lipid layers. The KLPPR size within the range of 30 ~ 80 nm allowed KLPPR distribute into kidney by passing through the glomerular filtration membrane and the KTP (sequence: CSAVPLC) decoration promoted the renal cellular uptake and endocytosis via a non-lysosomal pathway. Results: The KLPPR had an average size of 59.5±6.2 nm and exhibited high RH loading, sustained release, good stability and biocompatibility, rapid cellular uptake in HK-2 cells. In addition, intravenous administration of KLPPR resulted in excellent kidney-targeted distribution and low urinary excretion in mice with streptozocin-induced diabetic nephropathy (DN), lowered the parameters of urea nitrogen, serum creatinine and kidney index, as well as facilitated the recovery of renal physiological function in improving the levels of urinary creatinine and the creatinine clearance rate by suppressing secretion and accumulation of fibronectin and TGF-β1. Conclusion: Definitely, KLPPR were able to target the diseased kidney and improve the therapeutic effect of RH on DN by exploiting the two-step nanoparticular cascade of size control and enhancement of cellular uptake. This study offers a promising strategy for renal diseases treatment using liponanoparticle delivery system.

PEGylated Polyethylenimine Derivative-Mediated Local Delivery of the shSmad3 Inhibits Intimal Thickening after Vascular Injury

Intimal hyperplasia is a complex process which contributes to several clinical problems such as atherosclerosis and postangioplasty restenosis. Inhibition of Smad3 expression inhibits intimal thickening. Our previous study has modified biscarbamate cross-linked polyethylenimine derivative (PEI-Et) through PEGylation thus obtained polyethylene glycol-graft-polyethylenimine derivative (PEG-Et 1:1), which has lower cytotoxicity and higher gene transfection efficiency compared with PEI-Et. In this study, PEG-Et 1:1 was employed in Smad3 shRNA (shSmad3) delivery for preventing intimal hyperplasia after vascular injury. It was observed that PEG-Et 1:1 could condense shSmad3 gene into nanoparticles with particle size of 115–168 nm and zeta potential of 3–6 mV. PEG-Et 1:1 displayed remarkably lower cytotoxicity, higher transfection efficiency, and shRNA silencing efficiency than PEI-Et and PEI 25 kDa in vascular smooth muscle cells (VSMCs). Moreover, PEG-Et 1:1/shSmad3 polyplex treatment significantly inhibited collagen, matrix metalloproteinase 1 (MMP1), MMP2 and MMP9 expression, and upregulated tissue inhibitor of metalloproteinase 1 (TIMP1) expression both in vitro and in vivo. Furthermore, intravascular delivery of shSmad3 with PEG-Et 1:1 polyplex efficiently reduced Smad3 expression and inhibited intimal thickening 14 days after vascular injury. Ultimately, this study indicated that PEG-Et 1:1-mediated local delivery of shSmad3 is a promising strategy for preventing intimal thickening.

Characterization and Optimization of PLA Stereocomplexed Hydrogels for Local Gene Delivery Systems

Localized gene delivery still remains as a challenging therapeutic method due to the multiple hurdles to overcome. One of the significant factors is a development of a matrix to carry and safely deliver genes at the local site in a controlled manner and then exit and disintegrate harmlessly. This report describes the structural and mechanistic studies on the in-situ forming hydrogels composed of the PEI/DNA multi-layered micelles to apply for gene therapy. The stereocomplexation-driven hydrogel systems from the DNA-loaded and DNA-free PLA-PEG-PLA triblock copolymer micelles that include enantiomeric polylactide blocks exhibited a sol-to-gel transitions between room and body temperatures. These hydrogels have well-described structure and compositions, and improved mechanical properties. Furthermore, the investigation of their degradation profiles and chemical analysis indicated the faster acidic degradation and stepwise degradation process of these micelle–hydrogel systems.

Polyethylenimine-based nanocarriers in co-delivery of drug and gene: a developing horizon

The meaning of gene therapy is the delivery of DNA or RNA to cells for the treatment or prevention of genetic disorders. The success rate of gene therapy depends on the progression and safe gene delivery system. The vectors available for gene therapy are divided into viral and non-viral systems. Viral vectors cause higher transmission efficiency and long gene expression, but they have major problems, such as immunogenicity, carcinogenicity, the inability to transfer large size genes and high costs. Non-viral gene transfer vectors have attracted more attention because they exhibit less toxicity and the ability to transfer large size genes. However, the clinical application of non-viral methods still faces some limitations, including low transmission efficiency and poor gene expression. In recent years, numerous methods and gene-carriers have been developed to improve gene transfer efficiency. The use of Polyethylenimine (PEI) based transfer of collaboration may create a new way of treating diseases and the combination of chemotherapy and gene therapy. The purpose of this paper is to introduce the PEI as an appropriate vector for the effective gene delivery.

In Vitro Characterization and Evaluation of the Cytotoxicity Effects of Nisin and Nisin-Loaded PLA-PEG-PLA Nanoparticles on Gastrointestinal (AGS and KYSE-30), Hepatic (HepG2) and Blood (K562) Cancer Cell Lines

The aim of this study was an in vitro evaluation and comparison of the cytotoxic effects of free nisin and nisin-loaded PLA-PEG-PLA nanoparticles on gastrointestinal (AGS and KYSE-30), hepatic (HepG2), and blood (K562) cancer cell lines. To create this novel anti-cancer drug delivery system, the nanoparticles were synthesized and then loaded with nisin. Subsequently, their biocompatibility, ability to enter cells, and physicochemical properties, including formation, size, and shape, were studied using hemolysis, fluorescein isothiocyanate (FITC), Fourier transform infrared (FTIR) spectroscopy, dynamic light scattering (DLS), and scanning electron microscopy (SEM), respectively. Then, its loading efficiency and release kinetics were examined to assess the potential impact of this formulation for the nanoparticle carrier candidacy. The cytotoxicities of nisin and nisin-loaded nanoparticles were evaluated by using the MTT and Neutral Red (NR) uptake assays. Detections of the apoptotic cells were done via Ethidium Bromide (EB)/Acridine Orange (AO) staining. The FTIR spectra, SEM images, and DLS graph confirmed the formations of the nanoparticles and nisin-loaded nanoparticles with spherical, distinct, and smooth surfaces and average sizes of 100 and 200 nm, respectively. The loading efficiency of the latter nanoparticles was about 85-90%. The hemolysis test represented their non-cytotoxicities and the FITC images indicated their entrance inside the cells. An increase in the percentage of apoptotic cells was observed through EB/AO staining. These results demonstrated that nisin had a cytotoxic effect on AGS, KYSE-30, HepG2, and K562 cancer cell lines, while the cytotoxicity of nisin-loaded nanoparticles was more than that of the free nisin.

Polymers and hydrogels for local nucleic acid delivery

This review focusses on the rational design of materials (from polymers to hydrogel materials) to achieve successful local delivery of therapeutic nucleic acids.

Temperature-responsive hydrogels via the electrostatic interaction of amphiphilic diblock copolymers with pendant-ion groups

In this work, we prepared amphiphilic polyester diblock copolymers with pendant-ion groups and examined the formation of temperature-responsive hydrogels via the electrostatic interaction of cationic or anionic pendant groups.

Folate receptor targeted three-layered micelles and hydrogels for gene delivery to activated macrophages

New folic acid (FA) coupled three layered micelles (3LM) were designed to encapsulate DNA, and their application as delivery system that specifically targets activated macrophages was investigated for new treatment options in rheumatoid arthritis (RA). FA coupled poly(l-lactide)-b-poly(ethylene glycol) (FA-PEG-PLLA) was synthesized via the NHS-ester activated/amine coupling method. Fluorescein labeled folic acid was used for flow cytometric detection of the expression of functional folic receptor β in LPS-activated and resting macrophages. FA coupled 3LM were formulated in a two-step procedure and characterized regarding hydrodynamic diameters and zeta potentials. The presence of the targeting ligand was shown not to increase the size of the 3LM compared to their non-targeted counterparts. Targeted and non-targeted 3LM were used in vitro to optimize uptake conditions in the RAW 264.7 macrophage cell line. The amount of FA coupled polymer in the final formulation was found to be optimal at 75% FA-PEG-PLLA and 25% PLLA-PEG-PLLA. Subsequently, transgene expression in vitro in RAW 264.7 cells and ex vivo in primary activated and resting mouse macrophages was determined as a function of FR-mediated internalization of 3LM encapsulating GFP expressing plasmid. FR-overexpressing activated cells, as successfully identified by internalization of FA-fluorescein, showed significantly higher GFP expression in vitro and ex vivo than resting macrophages with only a basal level of FR expression. Lastly, injectable hydrogels as depot formulation were formed by stereocomplexation, and their degradation, DNA release profiles, and dissociation into intact 3LM were found to be beneficial for potential in vivo application. Our findings confirm that FA-3LM are taken up by activated macrophages via folate receptor mediated endocytosis and that their hydrogels release intact 3LM for efficient transfection of primary macrophages. Therefore, FA-3LM could become a promising delivery system for receptor-mediated drug or gene delivery and novel therapy for rheumatoid arthritis in an in situ forming gel formulation.

Drug-conjugated PLA-PEG-PLA copolymers: a novel approach for controlled delivery of hydrophilic drugs by micelle formation

A conjugate of the antihypertensive drug, lisinopril, with triblock poly(lactic acid)-poly(ethylene glycol)-poly(lactic acid) (PLA-PEG-PLA) copolymer was synthesized by the reaction of PLA-PEG-PLA copolymer with lisinopril in the presence of dicyclohexylcarbodiimide and dimethylaminopyridine. The conjugated copolymer was characterized in vitro by hydrogen nuclear magnetic resonance (HNMR), Fourier transform infrared (FTIR), differential scanning calorimetry (DSC) and gel permeation chromatography (GPC) techniques. Then, the lisinopril conjugated PLA-PEG-PLA were self-assembled into micelles in aqueous solution. The resulting micelles were characterized further by various techniques such as dynamic light scattering (DLS) and atomic force microscopy (AFM). The results revealed that the micelles formed by the lisinopril-conjugated PLA-PEG-PLA have spherical structure with the average size of 162 nm. The release behavior of conjugated copolymer, micelles and micelles physically loaded by lisinopril were compared in different media. In vitro release study showed that in contrast to physically loaded micelles, the release rate of micelles consisted of the conjugated copolymer was dependent on pH of media where it was higher at lower pH compared to the neutral medium. Another feature of the conjugated micelles was their more sustained release profile compared to the lisinopril-conjugated copolymer and physically loaded micelles.

A block copolymer containing PEG and histamine-like segments: well-defined functions for gene delivery

PEG-b-PAMPImB with well-defined functions, including high colloidal stability, effective DNA condensation and buffering capacity, self-assembles with pDNA for lower toxicity and higher efficient gene transfection.

Biodegradable Three-Layered Micelles and Injectable Hydrogels

Polymeric micelles have found a growing interest as gene vectors due to the serious safety concerns associated with viral vectors. In particular, the cationic polymer polyethylene imine (PEI) has shown relatively high condensation and transfection efficiencies. Additionally, polyethylene glycol (PEG) modification of polymeric gene vectors has dramatically improved their biological properties, including enhanced biocompatibility, prolonged circulation time, and increased bio-distribution. However, PEG grafting of PEI for subsequent condensation of nucleic acids (NAs) does not necessarily result in the formation of a PEI/NAs core with a PEG corona. But often times, the presence of PEG interferes with PEI's electrostatic interaction with NAs. We describe here a facile method to prepare multilayered biodegradable micelles which address some of the critical drawbacks associated with current PEI-based systems. The polyplex micelles have superb stability and stealth properties. Moreover, we describe a method to prepare fully biodegradable and biocompatible injectable hydrogels for use in localized gene therapy.

Screening PEGylated polyethylenimine derivatives for safe and efficient delivery of gene materials

PEG–Et 1 : 1 was screened out for the safe and efficient gene delivery by precise design of PEGylated polymeric nanomaterials.