A novel HEMA copolymer hydrogel with antifouling and anti-inflammatory activity as a promising medical device coating layer to prevent microbial adhesion

Compared to antimicrobial agents, anti-adhesive surfaces can reduce bacteria adhesion and biofilm formation in catheters, providing better selectivity, efficiency, and device life span. In this research, novel anionic surface biomaterials were created and tested to reduce microbial adhesion and colonization in medical device coating. Maleic anhydride (MA) was polymerized with 2-HEMA in varying amounts to produce a p(HEMA-co-MA) hydrogel copolymer. Fourier transforms infrared characterization (ATR-FTIR), thermal analysis, scanning electron microscopy with energy-dispersive X-ray spectroscopy, swelling capacity, cytotoxicity evaluation, and mixed biofilm formation ability were used to characterize the copolymer hydrogels. Hydrogels were evaluated by considering the guidance and regulations of ISO and ASTM standards. The polymers were dense, had stable cross-linking between both monomers, were non-toxic to the Human Embryonic Kidney (HEK) 293 cell line, and reduced bacterial biofilm formation statistically significantly. Furthermore, increasing the amount of MA affected TGF-1 gene expression, where the gene expression was significantly elevated, especially at the highest percentage of MA. Furthermore, the high percentage of MA in the polymer improved the new polymer's thermal properties, film flexibility, and swelling capacity. These novel polymers could be promising materials for improving catheter biomaterial properties and modifying the surfaces of designated devices to reduce microbial infections and growth.

Unraveling Endothelial Cell Migration: Insights into Fundamental Forces, Inflammation, Biomaterial Applications, and Tissue Regeneration Strategies

Cell migration is vital for many fundamental biological processes and human pathologies throughout our life. Dynamic molecular changes in the tissue microenvironment determine modifications of cell movement, which can be reflected either individually or collectively. Endothelial cell (EC) migratory adaptation occurs during several events and phenomena, such as endothelial injury, vasculogenesis, and angiogenesis, under both normal and highly inflammatory conditions. Several advantageous processes can be supported by biomaterials. Endothelial cells are used in combination with various types of biomaterials to design scaffolds promoting the formation of mature blood vessels within tissue engineered structures. Appropriate selection, in terms of scaffolding properties, can promote desirable cell behavior to varying degrees. An increasing amount of research could lead to the creation of the perfect biomaterial for regenerative medicine applications. In this review, we summarize the state of knowledge regarding the possible systems by which inflammation may influence endothelial cell migration. We also describe the fundamental forces governing cell motility with a specific focus on ECs. Additionally, we discuss the biomaterials used for EC culture, which serve to enhance the proliferative, proangiogenic, and promigratory potential of cells. Moreover, we introduce the mechanisms of cell movement and highlight the significance of understanding these mechanisms in the context of designing scaffolds that promote tissue regeneration.

Precise Fabrication of Porous Microspheres by Iso-Density Emulsion Combined with Microfluidics

Polymer porous microspheres with large specific surface areas and good fluidity have promising important applications in the biomedical field. However, controllable fabrication of porous microspheres with precise size, morphology, and pore structure is still a challenge, and phase separation caused by the instability of the emulsion is the main factor affecting the precise preparation of porous microspheres. Herein, a method combining the iso-density emulsion (IDE) template and microfluidics was proposed to realize the controllable preparation of polymer porous microspheres. The IDE exhibited excellent stability with minimal phase separation within 4 h, thus showing potential advantages in the large-scale preparation of porous microspheres. With the IDE template combined microfluidics technique and the use of a customized amphoteric copolymer, PEG-b-polycaprolactone, polycaprolactone (PCL) porous microspheres with porosity higher than 90% were successfully prepared. Afterwards, the main factors, including polymer concentration, water–oil ratio and homogenization time were investigated to regulate the pore structure of microspheres, and microspheres with different pore sizes (1–30 μm) were obtained. PCL porous microspheres exhibited comparable cell viability relative to the control group and good potential as cell microcarriers after surface modification with polydopamine. The modified PCL porous microspheres implanted subcutaneously in rats underwent rapid in vivo degradation and tissue ingrowth. Overall, this study demonstrated an efficient strategy for the precise preparation of porous microspheres and investigated the potential of the as-prepared PCL porous microspheres as cell microcarriers and micro-scaffolds.

Recapitulating dynamic ECM ligand presentation at biomaterial interfaces: Molecular strategies and biomedical prospects

The extracellular matrix (ECM) provides not only physical support for the tissue structural integrity, but also dynamic biochemical cues capable of regulating diverse cell behaviors and functions. Biomaterial surfaces with dynamic ligand presentation are capable of mimicking the dynamic biochemical cues of ECM, showing ECM-like functions to modulate cell behaviors. This review paper described an overview of present dynamic biomaterial interfaces by focusing on currently developed molecular strategies for dynamic ligand presentation. The paradigmatic examples for each strategy were separately discussed. In addition, the regulation of some typical cell behaviors on these dynamic biointerfaces including cell adhesion, macrophage polarization, and stem cell differentiation, and their potential applications in pathogenic cell isolation, single cell analysis, and tissue engineering are highlighted. We hope it would not only clarify a clear background of this field, but also inspire to exploit novel molecular strategies and more applications to match the increasing demand of manipulating complex cellular processes in biomedicine.

Cell Adhesion and Migration on Thickness Gradient Bilayer Polymer Brush Surfaces: Effects of Properties of Polymeric Materials of the Underlayer

In the field of tissue engineering and biomaterials, controlling the surface properties and mechanical properties of scaffold materials is crucial and has attracted much attention. Here, two types of bilayer polymer brushes composed of a hydrophilic underlying layer and a cationic surface layer [made of poly(2-aminoethyl methacrylate)] with a thickness gradient were prepared by surface-initiated atom-transfer radical polymerization. To investigate the influence of the stiffness as a mechanical property of the polymer brush on cell behavior, the underlayer was prepared from either 2-methacryloyloxyethyl phosphorylcholine or oligo(ethylene glycol) methyl ether methacrylate, with the bilayers designated as gradient poly(2-methacryloyloxyethyl phosphorylcholine)-block-poly(2-aminoethyl methacrylate) [grad-pMbA] and gradient poly(oligo[ethylene glycol] methyl ether methacrylate)-block-poly(2-aminoethyl methacrylate) [grad-pEGbA], respectively. Characterization of these surfaces was performed by spectroscopic ellipsometry, X-ray reflectivity, and determination of the zeta potential, static contact angle, and force curve. These diblock copolymer brushes with a thickness gradient helped to distinguish the effects of the mechanical and surface properties of the brushes on cell behavior. The attachment and motility of L929 fibroblasts and epithelial MCF 10A cells on the fabricated brushes were then assessed. L929 cells had a round shape on the thin surface layer of grad-pMbA and spread well on thicker areas. In contrast, MCF 10A cells spread well in areas of any thickness of either grad-pMbA or grad-pEGbA. Single MCF 10A cells migrated randomly on grad-pMbA, whereas grouped cells started to climb up along the thickness gradient of grad-pMbA. In contrast, both single and grouped MCF 10A cells migrated randomly on grad-pEGbA. These thickness gradient diblock copolymer brushes are simple, reproducible, and reasonable platforms that can facilitate practical applications of biomaterials, for example, in tissue engineering and biomaterials.

Grafting of CAG peptides and (polyethylene glycol) on unsaturated polyurethane films to promote selective adhesion and migration of urethral epithelial cells

Selective adhesion and migration of urethral epithelial cells (HUCs) over fibroblasts (FIBs) are very important in the reconstruction of the urethral epithelial layer and prevention of ureteral scarring and stenosis. In this study, unsaturated polyurethane (PPFU-CO-SS) films were co-grafted with a cell-resisting poly(ethylene glycol) (PEG) layer and HUC-selective Cys-Ala-Gly (CAG) peptides, whose physicochemical changes were confirmed by X-ray photon spectroscopy, fluorescence spectroscopy and water contact angle measurements. The adhesion and activation of platelets on the PEG/CAG grafted surface were significantly reduced compared to those on the PPFU-CO-SS, resulting in a similar status as that on a PEG-grafted surface. The HUC-selective material could obviously promote the adhesion and migration of HUCs. The ratio of the urethral epithelial cells to fibroblasts on the PEG/CAG grafted surface was nearly 3-fold that on the unmodified PPFU-CO-SS in a co-culture competitive environment. The urethral epithelial cells cultured on the PEG/CAG grafted surface also had the highest migration rate, which was 2.24-fold compared to that on the PPFU-CO-SS control.

The impact of antifouling layers in fabricating bioactive surfaces

Bioactive surfaces modified with functional peptides are critical for both fundamental research and practical application of implant materials and tissue repair. However, when bioactive molecules are tethered on biomaterial surfaces, their functions can be compromised due to unwanted fouling (mainly nonspecific protein adsorption and cell adhesion). In recent years, researchers have continuously studied antifouling strategies to obtain low background noise and effectively present the function of bioactive molecules. In this review, we describe several commonly used antifouling strategies and analyzed their advantages and drawbacks. Among these strategies, antifouling molecules are widely used to construct the antifouling layer of various bioactive surfaces. Subsequently, we summarize various structures of antifouling molecules and their surface grafting methods and characteristics. Application of these functionalized surfaces in microarray, biosensors, and implants are also introduced. Finally, we discuss the primary challenges associated with antifouling layers in fabricating bioactive surfaces and provide prospects for the future development of this field. STATEMENT OF SIGNIFICANCE: The nonspecific protein adsorption and cell adhesion will cause unwanted background "noise" on the surface of biological materials and detecting devices and compromise the performance of functional molecules and, therefore, impair the performance of materials and the sensitivity of devices. In addition, the selection of antifouling surfaces with proper chain length and high grafting density is also of great importance and requires further studies. Otherwise, the surface-tethered bioactive molecules may not function in their optimal status or even fail to display their functions. Based on these two critical issues, we summarize antifouling molecules with different structures, variable grafting methods, and diverse applications in biomaterials and biomedical devices reported in literature. Overall, we expect to shed some light on choosing the appropriate antifouling molecules in fabricating bioactive surfaces.

Remodeling of the Microvasculature: May the Blood Flow Be With You

The vasculature ensures optimal delivery of nutrients and oxygen throughout the body, and to achieve this function it must continually adapt to varying tissue demands. Newly formed vascular plexuses during development are immature and require dynamic remodeling to generate well-patterned functional networks. This is achieved by remodeling of the capillaries preserving those which are functional and eliminating other ones. A balanced and dynamically regulated capillary remodeling will therefore ensure optimal distribution of blood and nutrients to the tissues. This is particularly important in pathological contexts in which deficient or excessive vascular remodeling may worsen tissue perfusion and hamper tissue repair. Blood flow is a major determinant of microvascular reshaping since capillaries are pruned when relatively less perfused and they split when exposed to high flow in order to shape the microvascular network for optimal tissue perfusion and oxygenation. The molecular machinery underlying blood flow sensing by endothelial cells is being deciphered, but much less is known about how this translates into endothelial cell responses as alignment, polarization and directed migration to drive capillary remodeling, particularly in vivo. Part of this knowledge is theoretical from computational models since blood flow hemodynamics are not easily recapitulated by in vitro or ex vivo approaches. Moreover, these events are difficult to visualize in vivo due to their infrequency and briefness. Studies had been limited to postnatal mouse retina and vascular beds in zebrafish but new tools as advanced microscopy and image analysis are strengthening our understanding of capillary remodeling. In this review we introduce the concept of remodeling of the microvasculature and its relevance in physiology and pathology. We summarize the current knowledge on the mechanisms contributing to capillary regression and to capillary splitting highlighting the key role of blood flow to orchestrate these processes. Finally, we comment the potential and possibilities that microfluidics offers to this field. Since capillary remodeling mechanisms are often reactivated in prevalent pathologies as cancer and cardiovascular disease, all this knowledge could be eventually used to improve the functionality of capillary networks in diseased tissues and promote their repair.

Scratch on Polymer Materials Using AFM Tip-Based Approach: A Review

As a brand new nanomachining method, the tip-based nanomachining/nanoscratching (TBN) method has exhibited a powerful ability at machining on polymer materials and various structures have been achieved using this approach, ranging from the nanodot, nanogroove/channel, bundle to 2D/3D (three-dimensional) nanostructures. The TBN method is widely used due to its high precision, ease of use and low environmental requirements. First, the theoretical models of machining on polymer materials with a given tip using the TBN method are presented. Second, advances of nanostructures achieved by this method are given, including nanodots/nanodot arrays, a nanogroove/channel, 2D/3D nanostructures and bundles. In particular, a useful approach called the ultrasonic vibration-assisted method introduced to integrate with TBN method to reduce the wear of the tip is also reviewed, respectively. Third, the typical applications of the TBN method and the nanostructures achieved by it are summarized in detail. Finally, the existing shortcomings and future prospects of the TBN method are given. It is confirmed that this review will be helpful in learning about this method and push the technology toward industrialization.