Apatite Formation Induced by Chitosan/Gelatin Hydrogel Coating Anchored on Poly(aryl ether nitrile ketone) Substrates to Promote Osteoblastic Differentiation

Flexible coatings based on hydrogel to enhance the biointerface of biomedical implants

The use of biomedical implants in surgical techniques promotes the restoration of lost tissue or organ physiological functions in the body. The interface between different materials determines their interactions and ultimately affects the physicochemical properties of biomedical implants. After implantation, the biointerface plays a crucial role in determining the biocompatibility and functionality of biomedical implants. Surface modification of biomaterials by developing novel biomaterials like various flexible coatings to meet the requirements of biointerfaces, such as mechanical performance, compatibility safety, and biological activities, can improve material-biological interactions by maintaining its original volumetric characteristics. Hydrogels possess excellent plasticity, biodegradability, biocompatibility, and extracellular-matrix-like properties, making them widely used in the biomedical field. Moreover, due to their unique three-dimensional crosslinked hydrophilic network, hydrogels can encapsulate a variety of materials, such as small molecules, polymers, and particle. In recent years, it has been proved that coating biomedical implant materials with flexible hydrogels can optimize the biointerface and holds vast potential for implant surface modification. In this review, we first discussed the potential requirements of the biointerface on the surface of implantable materials in both in vitro and in vivo biological microenvironments. Based on these comprehensive reviews, we also introduced the potential applications of hydrogels in both in vitro and in vivo settings. Finally, this review focused on the challenges faced by the biointerface of implantable materials constructed based on hydrogels and proposed future approaches to inspire researchers with new ideas.

Biomimetic Morphogenesis of Strontium Chitosan-Gelatin Composite Aggregates via EPD and Biomineralization in vitro and in vivo

Introduction

Biomineralization has been increasingly adopted for the synthesis of advanced materials with superior properties. Hierarchical architecture growth mimicking biomineralization has been studied using various organic molecules to template inorganic materials with controlled morphology. In our previous study, self-assembled Sr/CS/G(SrCO3-chitosan-gelatin) aggregates were fabricated using electrophoretic deposition (EPD). This study is a further step toward understanding the morphogenesis of Sr/CS/G aggregates and its biomineralization.

Methods

Scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray diffraction (XRD) were used to investigate the biomimetic morphogenesis of Sr/CS/G composite under various EPD parameters, such as polymer concentration, time, and voltage. The Sr/CS/G aggregates were immersed in H2O, phosphate-buffered saline (PBS), and simulated body fluid (SBF) to study the bioactive apatite formation ability. In addition, biocompatibility of the composites were evaluated by Fluorescence staining, SEM in vitro. The osteogenic ability of the coatings induced by PBS were tested in vivo.

Results

The CS/G weight ratio, EPD time, and voltage were found to influence the morphogenesis of Sr/CS/G aggregates. SEM and TEM results showed that the Sr/CS/G aggregates exhibited fractal growth characteristics and morphological self-similarity. XRD results confirmed the formation of SrCO3 crystals within the framework of chitosan and gelatin organic templates. Chitosan played a vital role in branching growth of the crystals, whereas gelatin guided the formation of composite spheres. The microstructural and compositional results reveal that the Sr/CS/G-induced apatite coating yielded a large quantity of apatite. These apatite coatings promote the cytocompatibility and osteogenesis of rat bone marrow mesenchymal stem cells (rBMSCs) in vitro. The coatings induced by PBS enhanced proliferation and mineralization in vitro, and enhanced angiogenesis and osteogenesis in vivo.

Conclusion

Sr/CS/G composites prepared via EPD are promising organic-inorganic templates for biomineralization. These findings provide important insights into understanding the mineralization process and optimizing the design of advanced biological materials.

Characterization and biocompatibility of a bilayer PEEK-based scaffold for guiding bone regeneration

BACKGROUND

Polyetheretherketone (PEEK) is well known for its excellent physical-chemical properties and biosafety. The study aimed to open up a new method for clinical application of PEEK to reconstruct large-scale bone defects.

METHODS

A bilayer scaffold for bone regeneration was prepared by combining a sulfonated PEEK barrier framework (SPEEK) with a hydrogel layer loaded with aspirin (ASA) and nano-hydroxyapatite (nHAP) by the wet-bonding of Polydopamine (PDA).

RESULTS

The hydrogel was successfully adhered to the surface of SPEEK, resulting in significant changes including the introduction of bioactive groups, improved hydrophilicity, and altered surface morphology. Subsequent tests confirmed that the bilayer scaffold exhibited enhanced compression resistance and mechanical compatibility with bone compared to a single hydrogel scaffold. Additionally, the bilayer scaffold showed stable and reliable bonding properties, as well as excellent biosafety verified by cell proliferation and viability experiments using mouse embryo osteoblast precursor (MC3T3-E1) cells.

CONCLUSION

The bilayer bone regeneration scaffold prepared in this study showed promising potential in clinical application for bone regeneration.

Evaluation of gelatin-based hydrogels for colon and pancreas studies using 3D in vitro cell culture

Biomimetic 3D models emerged some decades ago to address 2D cell culture limitations in the field of replicating biological phenomena, structures or functions found in nature. The fabrication of hydrogels for cancer disease research enables the study of cell processes including growth, proliferation and migration and their 3D design is based on the encapsulation of tumoral cells within a tunable matrix. In this work, a platform of gelatin methacrylamide (GelMA)-based photocrosslinked scaffolds with embedded colorectal (HCT-116) or pancreatic (MIA PaCa-2) cancer cells is presented. Prior to cell culture, the mechanical characterization of hydrogels was assessed in terms of stiffness and swelling behavior. Modifications of the UV curing time enabled a fine tuning of the mechanical properties, which at the same time, showed susceptibility to the chemical composition and crosslinking mechanism. All scaffolds displayed excellent cytocompatibility with both tumoral cells while eliciting various cell responses depending on the microenvironment features. Individual and collective cell migration were observed for HCT-116 and MIA PaCa-2 cell lines, highlighting the ability of the colorectal cancer cells to cluster into aggregates of different sizes governed by the surrounding matrix. Additionally, metabolic activity results pointed out to the development of a more proliferative phenotype within stiffer networks. These findings confirm the suitability of the presented platform of GelMA-based hydrogels to conduct 3D cell culture experiments and explore biological processes associated with colorectal and pancreatic cancer.

Corrosion-tailoring, osteogenic, anti-inflammatory, and antibacterial aspirin-loaded organometallic hydrogel composite coating on biodegradable Zn for orthopedic applications

Zn and its alloys are receiving increasing interest for biodegradable orthopedic implant applications owing to their moderate corrosion rate and the potential functionality of Zn2+. However, their non-uniform corrosion behavior and insufficient osteogenic, anti-inflammatory, and antibacterial properties do not meet the comprehensive requirements of orthopedic implants in clinical use. Herein, an aspirin (an acetylsalicylic acid, ASA, 10, 50, 100, and 500 mg/L)-loaded carboxymethyl chitosan (CMC)/gelatin (Gel)-Zn2+ organometallic hydrogel composite coating (CMC/Gel&Zn2+/ASA) was fabricated on a Zn surface via an alternating dip-coating method, aiming to obtain a material with these comprehensive properties improved. The organometallic hydrogel composite coatings, ca. 12-16 μm in thickness, showed compact, homogeneous, and micro-bulge structured surface morphology. The coatings protected well the Zn substrate from pitting/localized corrosion and contained the release of the bioactive components, Zn2+ and ASA, in a sustained and stable manner in long-term in vitro immersions in Hank's solution. The coated Zn showed greater ability to promote proliferation and osteogenic differentiation for MC3T3-E1 osteoblasts, and better anti-inflammatory capacity when compared with uncoated Zn. Additionally, this coating displayed excellent antibacterial activity against both Escherichia coli (>99 % antibacterial rate) and Staphylococcus aureus (>98 % antibacterial rate). Such appealing properties can be attributed to the compositional nature of the coating, namely the sustained release of Zn2+ and ASA, as well as the surface physiochemical properties because of its unique microstructure. This organometallic hydrogel composite coating can be considered a promising option for the surface modification of biodegradable Zn-based orthopedic implants among others.

A New Strategy to Improve the Toughness of Epoxy Thermosets-By Introducing Poly(ether nitrile ketone)s Containing Phthalazinone Structures

As high brittleness limits the application of all epoxy resins (EP), here, it can be modified by high-performance thermoplastic poly(ether nitrile ketone) containing phthalazinone structures (PPENK). Therefore, the influence of different PPENK contents on the mechanical, thermal, and low-temperature properties of EP was comprehensively investigated in this paper. The binary blend of PPENK/EP exhibited excellent properties due to homogeneous mixing and good interaction. The presence of PPENK significantly improved the mechanical properties of EP, showing 131.0%, 14.2%, and 10.0% increases in impact, tensile, and flexural strength, respectively. Morphological studies revealed that the crack deflection and bridging in PPENK were the main toughening mechanism in the blend systems. In addition, the PPENK/EP blends showed excellent thermal and low-temperature properties (-183 °C). The glass transition temperatures of the PPENK/EP blends were enhanced by approximately 50 °C. The 15 phr of the PPENK/EP blends had a low-temperature flexural strength of up to 230 MPa, which was 46.5% higher than EP. Furthermore, all blends exhibited better thermal stability.

Stabilization of Apatite Coatings on PPENK Surfaces by Mechanical Interlocking to Promote Bioactivity and Osseointegration In Vivo

Apatite coatings with high stability can effectively improve the surface bioactivity and osteogenic activity of implant materials. In clinical practice, the ability of apatite coatings to bond with the substrate is critical to the effect of implants. Here, we propose a strategy to construct a three-dimensional (3D) nanoporous structure on the surface of a poly(phthalazinone ether nitrile ketone) (PPENK) substrate and introduce a polydopamine (PDA) coating with grafted phosphonate groups to enhance the overall deposition of a bone-like apatite coating in the 3D nanoporous structure during mineralization. This method leads to a mechanical interlocking between the apatite coating and the substrate, which increases the stability of the apatite coating. The apatite coating confers a better bioactive surface to PPENK and also promotes osteogenic differentiation and adhesion of MC3T3-E1 osteoblasts in vitro. The samples are then implanted into rat femurs to characterize in vivo osseointegration. Micro-CT data and histological staining of tissue sections reveal that PPENK with a stable apatite coating induces less fibrous capsule formation and no inflammatory response and promotes osteogenic differentiation and bone-bonding strength. This enhances the long-term use of PPENK implant materials and shows great potential for clinical application as orthopedic implants.

Graded-Three-Dimensional Cell-Encapsulating Hydrogel as a Potential Biologic Scaffold for Disc Tissue Engineering

BACKGROUND

Intervertebral disk (IVD) degeneration, which can cause lower back pain, is a major predisposing factor for disability and can be managed through multiple approaches. However, there is no satisfactory strategy currently available to reconstruct and recover the natural properties of IVDs after degeneration. As tissue engineering develops, scaffolds with embedded cell cultures have proved critical for the successful regeneration of IVDs.

METHODS

In this study, an integrated scaffold for IVD replacement was developed. Through scanning electron microscopy and other mechanical measurements, we characterized the physical properties of different hydrogels. In addition, we simulated the physiological structure of natural IVDs. Nucleus pulposus (NP) cells and annulus fibrosus-derived stem cells (AFSCs) were seeded in gelatin methacrylate (GelMA) hydrogel at different concentrations to evaluate cell viability and matrix expression.

RESULTS

It was found that different concentrations of GelMA hydrogel can provide a suitable environment for cell survival. However, hydrogels with different mechanical properties influence cell adhesion and extracellular matrix component type I collagen, type II collagen, and aggrecan expression.

CONCLUSION

This tissue-engineered IVD implant had a similar structure and function as the native IVD, with the inner area mimicking the NP tissue and the outer area mimicking the stratified annulus fibrosus tissue. The new integrated scaffold demonstrated a good simulation of disc structure. The preparation of efficient and regeneration-promoting tissue-engineered scaffolds is an important issue that needs to be explored in the future. It is hoped that this work will provide new ideas and methods for the further construction of functional tissue replacement discs.

Tunicate inspired gelatin-based tough hydrogel wound dressing containing twisted phthalazinone with adhesive, self-healing and antibacterial properties

As a hydrolytic product of collagen, gelatin is a polypeptide of biological origin. Gelatin hydrogels emerge as promising material candidates for traditional dressings due to good biocompatibility and the ability to keep wounds moist. However, it is difficult to simultaneously achieve gelatin hydrogel with robust mechanical property for long-term usage, reliable tissue adhesion, self-healing and antibacterial properties. Herein, we propose a simply synthesized strategy of a multifunctional gelatin hydrogel dressing, which is constructed by conjugating a newly synthesized 2-(4'-aldehydephenyl)-4-(2',3',4'-trihydroxyphenyl)-2,3-phthalazine-1(2H)-one (THPZB) to gelatin with Schiff base and chelating with Fe³⁺ ions (termed G/THPZB/Fe hydrogel). The twisted structure of phthalazinone in THPZB leads to entanglement of gelatin molecular chains, which resolves the stiffness-toughness conflict of the hydrogel. Furthermore, the strong tissue adhesion and fast self-healing capability mainly originate from the hydrogen bonding of the pyrogallol in THPZB. In vitro study shows that the hydrogels possess good biocompatibility with L929 cells, hemostatic and antibacterial activity. In the rat model of skin infection, the hydrogel dressing not only have no adverse effects on vital organs, but also can effectively promote wound healing of bacterial infection. Considering that it has multiple functions, G/THPZB/Fe hydrogel can be used as a promising wound dressing for biomedical applications.

Chitosan-Based Biomaterial Scaffolds for the Repair of Infected Bone Defects

The treatment of infected bone defects includes infection control and repair of the bone defect. The development of biomaterials with anti-infection and osteogenic ability provides a promising strategy for the repair of infected bone defects. Owing to its antibacterial properties, chitosan (an emerging natural polymer) has been widely studied in bone tissue engineering. Moreover, it has been shown that chitosan promotes the adhesion and proliferation of osteoblast-related cells, and can serve as an ideal carrier for bone-promoting substances. In this review, the specific molecular mechanisms underlying the antibacterial effects of chitosan and its ability to promote bone repair are discussed. Furthermore, the properties of several kinds of functionalized chitosan are analyzed and compared with those of pure chitosan. The latest research on the combination of chitosan with different types of functionalized materials and biomolecules for the treatment of infected bone defects is also summarized. Finally, the current shortcomings of chitosan-based biomaterials for the treatment of infected bone defects and future research directions are discussed. This review provides a theoretical basis and advanced design strategies for the use of chitosan-based biomaterials in the treatment of infected bone defects.

Enhanced Shape Memory Metal-Coordinated Poly(aryl ether ketone)s with Tunable Gradient-Deformation Behaviors as well as Self-Healing and Reprocessing Abilities

Reversible dynamic bonds are able to crack and recombine upon external stimuli, which endow polymers with exceptional self-healing, reprocessing, and reversible deformation ability. In this paper, we integrated the metal coordination bonds into shape memory poly(aryl ether ketone) (PAEK) to fabricate smart materials with multifunctionalities. Through tuning the metal ion content and species, the enhancement of shape memory behaviors was achieved, including the high recovery ratio (over 98%) and fixity ratio (over 98%), which was closely related to the synergic effect of the intrinsic motion ability of PAEK matrix and the cracking-recombination of coordination bonds. Besides, through the combination of the components with different Cu²⁺ contents, in addition to the components with Fe²⁺ coordination bonds, we fabricated the gradient shape memory structures with controllable shape memory and recovery behaviors. The manipulation of gradient coordination bonds resulted in different shape recovery speeds and directions. Furthermore, due to the dynamic cracking-recombination of coordination bonds, the metal-coordinated PAEK material exhibited the great self-healing and reprocessing performances, which were significant for largely extending its application range.

Anti-tuberculosis drug delivery for tuberculous bone defects

INTRODUCTION

Traditional therapy methods for treating tuberculous bone defects have several limitations. Furthermore, systemic toxicity and disease recurrence in tuberculosis (TB) have not been effectively addressed.

AREAS COVERED

This review is based on references from September 1998 to September 2021 and summarizes the classification and drug-loading methods of anti-TB drugs. The application of different types of biological scaffolds loaded with anti-TB drugs as a novel drug delivery strategy for tuberculous bone defects has been deeply analyzed. Furthermore, the limitations of the existing studies are summarized.

EXPERT OPINION

Loading anti-TB drugs into the scaffold through various drug-loading techniques can effectively improve the efficiency of anti-TB treatment and provide an effective means of treating tuberculous bone defects. This methodology also has good application prospects and provides directions for future research.