A Facile One-Pot Synthesis to Dextran-Based Nanoparticles with Carboxy Functional Groups

Cell Coding Arrays Based on Fluorescent Glycan Nanoparticles for Cell Line Identification and Cell Contamination Evaluation

Cell lines are applied on a large scale in the field of biomedicine, but they are susceptible to issues such as misidentification and cross-contamination. This situation is becoming worse over time due to the rapid growth of the biomedical field, and thus there is an urgent need for a more effective strategy to address the problem. As described herein, a cell coding method is established based on two types of uniform and stable glycan nanoparticles that are synthesized using the graft-copolymerization-induced self-assembly (GISA) method, which further exhibit distinct fluorescent properties due to elaborate modification with fluorescent labeling molecules. The different affinity between each nanoparticle and various cell lines results in clearly distinguishable differences in their endocytosis degrees, thus resulting in distinct characteristic fluorescence intensities. Through flow cytometry measurements, the specific signals of each cell sample can be recorded and turned into a map divided into different regions by statistical processing. Using this sensing array strategy, we have successfully identified six human cell lines, including one normal type and five tumor types. Moreover, cell contamination evaluation of different cell lines with HeLa cells as the contaminant in a semiquantitative analysis has also been successfully achieved. Notably, the whole process of nanoparticle fabrication and fluorescent testing is facile and the results are highly reliable.

Dextran-based tube-guides for the regeneration of the rat sciatic nerve after neurotmesis injury

In this work, dextran-based nerve tube-guides were prepared, characterized and used in a standardized animal model of neurotmesis injury. Non-porous and porous transparent tube-guides were obtained by photocrosslinking of two co-macromonomers based on dextran and poly(ε-caprolactone) (PCL). Swelling capacity of the tube-guides ranged from 40-60% with no visible constriction of their inner diameter. In vitro hydrolytic degradation tests showed that the tube-guides maintained their structural integrity up to 6 months. The in vivo performance of the tube-guides was evaluated by entubulation of the rat sciatic nerve after a neurotmesis injury, with a 10 mm-gap between the nerve stumps. The results showed that the tube-guides were able to promote the regeneration of the nerve in a similar manner to what was observed with conventional techniques (nerve graft and end-to-end suture). Stereological analysis proved that nerve regeneration occurred, and both tube-guides presented fibre diameter and g-ratio closer to healthy sciatic nerves. The histomorphometric analysis of Tibialis anterior (TA) skeletal muscle showed decreased neurogenic atrophy in the porous tube-guides treated group, presenting measurements that are similar to the uninjured control.

Innovative tailor made dextran based membranes with excellent non-inflammatory response: In vivo assessment

In this work, dextran based membranes with potential to be used as implantable devices in Tissue Engineering and Regenerative Medicine (TERM) were prepared by a straightforward strategy. Briefly, two polymers approved by the Food and Drug Administration, viz. dextran and poly(ε-caprolactone) (PCL) were functionalized with methacrylate moieties, and subjected to photocrosslinking. Employing different weight ratios of each polymer in the formulations allowed to obtain transparent membranes with tunable physicochemical properties and low adverse host tissue response. Independently of the material, all formulations have shown to be thermally stable up to 300 °C whilst variations in the polymer ratio resulted in membranes with different glass transition temperatures (T_g) and flexibility. The swelling capacity ranged from 50% to 200%. On the other hand, in vitro hydrolytic degradation did not show to be material-dependent and all membranes maintained their structural integrity for more than 30 days, losing only 8-12% of their initial weight. Preliminary in vitro biological tests did not show any cytotoxic effect on seeded human dental pulp stem cells (hDPSCs), suggesting that, in general, all membranes are capable of supporting cell adhesion and viability. The in vivo biocompatibility of membranes implanted subcutaneously in rats' dorsum indicate that M100/0 (100%wt dextran) and M25/75 (25 %wt dextran) formulations can be classified as "slight-irritant" and "non-irritant", respectively. From the histological analysis performed on the main tissue organs it was not possible to detect any signs of fibrosis or necrosis thereby excluding the presence of toxic degradation by-products deposited or accumulated in these tissues. In combination, these results suggest that the newly developed formulations hold great potential as engineered devices for biomedical applications, where the biological response of cells and tissues are greatly dependent on the physical and chemical cues provided by the substrate.

Dexamethasone-Loaded Chitosan Beads Coated with a pH-Dependent Interpolymer Complex for Colon-Specific Drug Delivery

Chitosan (CS) microparticles loaded with dexamethasone were prepared by spray drying, followed by coating with a pH-dependent interpolymer complex based on poly(acrylic acid)/poly(vinyl pyrrolidone) using an water-in-oil emulsion technique. The aim of this research was to evaluate the influence of PAA/PVP coating on the release of dexamethasone from loaded chitosan microparticles, in simulated gastric fluid (SGF, pH=1.2) and simulated intestinal fluid (SIF, pH=6.8). The release of dexamethasone from uncoated loaded CS microparticles was similar in both fluids, and almost complete release of the drug was achieved in 5 hours. In the coated loaded CS microparticles, the release of dexamethasone in SGF was reduced considerably, very close to zero, due to the interpolymer complex formation at low pH, demonstrating that this system applied as pH-dependent coating has a potential as a site-specific delivery system.

Thermal sensitive microgels with stable and reversible photoluminescence based on covalently bonded quantum dots

In this study, thermal sensitive microgels functionalized with carboxyl groups were synthesized directly from hydroxypropyl cellulose (HPC) and acrylic acid (AA) without using any organic solvent. Furthermore, covalently bonded hybrid microgels with novel thermosensitivity in terms of size and fluorescence were fabricated from these HPC-PAA microgels and cysteamine-capped CdTe quantum dots (QDs). The composition of the hybrid microgels were characterized by thermal thermogravimetric analysis (TGA) and coulometric titration. It was verified that the weight percent of CdTe QDs was ca. 40%, and the percent of poly(acrylic acid) varied between 9.0% and 13.6%. Through a systematic study, it was found that both the size and the fluorescent intensity of the microgels decreased as the temperature increased from below the lower critical solution temperature (LCST) to above the LCST of the HPC. Different from most reported cases, it was found that the thermal sensitive alteration of the current hybrid microgels' size and fluorescent intensity are reversible. The novel fluorescent properties are deduced to be related to the structural characteristics of the microgels, i.e., the QDs are covalently bonded to the microgels and the dispersion of QDs in the microgels is spatially homogeneous. As a consequence of this special structure, the refractive indexes of the microgels were changed and the surface defects of the QDs were reduced, and therefore affected the fluorescent properties of the resulting hybrid microgels.

Engineering of nanometer-sized cross-linked hydrogels for biomedical applications

Microgels/nanogels (micro/nanogels) are promising drug-delivery systems (DDS) because of their unique properties, including tunable chemical and physical structures, good mechanical properties, high water content, and biocompatibility. They also feature sizes tunable to tens of nanometers, large surface areas, and interior networks. These properties demonstrate the great potential of micro/nanogels for drug delivery, tissue engineering, and bionanotechnology. This mini-review describes the current approaches for the preparation and engineering of effective micro/nanogels for drug-delivery applications. It emphasizes issues of degradability and bioconjugation, as well as loading/encapsulation and release of therapeutics from customer-designed micro/nanogels.

The one-pot synthesis of dextran-based nanoparticles and their application in in-situ fabrication of dextran-magnetite nanocomposites

The dextran-based nanoparticles containing carboxyl groups were synthesized by a one-pot approach, without using any organic solvents and surfactants. The resultant dextran-based nanoparticles was used as a host for the growing and organization of Fe(3)O(4) nanoparticles. The approach consists of the mixture of ferrous/ferric ions aqueous solution and host nanoparticles and subsequent coprecipitation of ferrous/ferric ions in basic medium. The magnetic nanocomposite material obtained was characterized using transmission electron microscopy (TEM), dynamic light scattering (DLS), thermogravimetric analysis (TGA), X-ray diffraction techniques (XRD) and vibrating sample magnetometry (VSM). The data demonstrate that the carboxyls which can capture cationic ferrous/ferric by electronic interaction in the dextran-based hosts plays a crucial role in fabricating nanocomposites with a homogeneous spatial distribution of magnetite nanoparticles. The magnetic nanocomposites exhibit comparable saturation magnetizations to that of reported Fe(3)O(4) nanoparticles, and therefore display great potential in a large scope of biomedical fields.