Amphiphilic Multi-Arm Star-Block Copolymers for Encapsulation of Fragrance Molecules

Amphiphilic Graft Copolymers for Time-Delayed Release of Hydrophobic Fragrances

When a controlled or retarded release of perfumes is required such as in cosmetics or cleaning products, polymers can be applied as encapsulation agents. With regard to such applications, we investigated two amphiphilic graft copolymers featuring a polydehydroalanine (PDha) backbone and different hydrophobic side chains. Hereby, grafting of aliphatic octyl side chains (PDha-g-EOct) enabled the adsorption of the aliphatic fragrance tetrahydrolinalool with moderate loads, whereas benzyl side chains (PDha-g-BGE) allowed taking up aromatic fragrances, for example, amylsalicylate-n with exceptionally high loads of up to 8 g g^-1. The side-chain density was studied as well but had no significant influence on the loading. In addition, the characterization and quantification of the load by NMR and thermogravimetric analysis were compared, and it was also possible to load the aromatic model fragrance into the graft copolymer with aliphatic side chains. After 3 months, the load had decreased by 40-50% and, hence, such systems are of interest for a long-term release of perfumes over months. Although this study is a proof-of-concept, we foresee that such polyampholytic graft copolymers can be tailored for the adsorption of a variety of hydrophobic perfumes simply by altering polarity and chemistry of the side chain.

Encapsulation of volatile compounds in liquid media: Fragrances, flavors, and essential oils in commercial formulations

The first marketed example of the application of microcapsules dates back to 1957. Since then, microencapsulation techniques and knowledge have progressed in a plethora of technological fields, and efforts have been directed toward the design of progressively more efficient carriers. The protection of payloads from the exposure to unfavorable environments indeed grants enhanced efficacy, safety, and stability of encapsulated species while allowing for a fine tuning of their release profile and longer lasting beneficial effects. Perfumes or, more generally, active-loaded microcapsules are nowadays present in a very large number of consumer products. Commercial products currently make use of rigid, stable polymer-based microcapsules with excellent release properties. However, this type of microcapsules does not meet certain sustainability requirements such as biocompatibility and biodegradability: the leaking via wastewater contributes to the alarming phenomenon of microplastic pollution with about 4% of total microplastic in the environment. Therefore, there is a need to address new issues which have been emerging in relation to the poor environmental profile of such materials. The progresses in some of the main application fields of microencapsulation, such as household care, toiletries, cosmetics, food, and pesticides are reviewed herein. The main technologies employed in microcapsules production and the mechanisms underlying the release of actives are also discussed. Both the advantages and disadvantages of every technique have been considered to allow a careful choice of the most suitable technique for a specific target application and prepare the ground for novel ideas and approaches for encapsulation strategies that we expect to be proposed within the next years.

Advances in amphiphilic hyperbranched copolymers with an aliphatic hyperbranched 2,2-bis(methylol)propionic acid-based polyester core

Amphiphilic hyperbranched copolymers with an aliphatic hyperbranched 2,2-bis(methylol)propionic acid-based polyester core were highlighted.

Host–guest binding motifs based on hyperbranched polymers

Host–guest systems based on hyperbranched polymers together with their unique properties and various applications have been summarized.

Synthesis and encapsulation of an amphiphilic thermoresponsive star polymer with β-cyclodextrin and hyperbranched poly(oligo(ethylene glycol)methacrylate) as building blocks

Schematic illustrations of the thermally-induced self-assembly and possible encapsulation behaviors with single or multi-guests for PE-CD–POEGMAS.

Aliphatic polyester polymer stars: synthesis, properties and applications in biomedicine and nanotechnology

A critical review: the ring-opening polymerization of cyclic esters provides access to an array of biodegradable, bioassimilable and renewable polymeric materials. Building these aliphatic polyester polymers into larger macromolecular frameworks provides further control over polymer characteristics and opens up unique applications. Polymer stars, where multiple arms radiate from a single core molecule, have found particular utility in the areas of drug delivery and nanotechnology. A challenge in this field is in understanding the impact of altering synthetic variables on polymer properties. We review the synthesis and characterization of aliphatic polyester polymer stars, focusing on polymers originating from lactide, ε-caprolactone, glycolide, β-butyrolactone and trimethylene carbonate monomers and their copolymers including coverage of polyester miktoarm star copolymers. These macromolecular materials are further categorized by core molecules, catalysts employed, self-assembly and degradation properties and the resulting fields of application (262 references).

Amphiphilic multi-arm-block copolymer conjugated with doxorubicin via pH-sensitive hydrazone bond for tumor-targeted drug delivery

Folate-conjugated unimolecular micelles based on amphiphilic hyperbranched block copolymer, Boltorn H40-poly(l-aspartate-doxorubicin)-b-poly(ethylene glycol)/FA-conjugated poly(ethylene glycol) (H40-P(LA-DOX)-b-PEG-OH/FA), were synthesized as a carrier for tumor-targeted drug delivery. The anticancer drug DOX was covalently conjugated onto the hydrophobic segments of the amphiphilic block copolymer arms by pH-sensitive hydrazone linkage. The size of the unimolecular micelles was determined as approximately 17-36 and 10-20 nm by dynamic light scattering (DLS) and transmission electron microscopy (TEM), respectively. The release profiles of the DOX from the H40-P(LA-DOX)-b-PEG-OH/FA micelles showed a strong dependence on the environmental pH values. The DOX release rate increased in the acidic medium due to the acid-cleavable hydrazone linkage between the DOX and micelles. Cellular uptake of the H40-P(LA-DOX)-b-PEG-OH/FA micelles was found to be higher than that of the H40-P(LA-DOX)-b-PEG-OH micelles because of the folate-receptor-mediated endocytosis, thereby providing higher cytotoxicity against the 4T1 mouse mammary carcinoma cell line. Degradation studies showed that the H40-P(LA-DOX)-b-PEG-OH/FA copolymer hydrolytically degraded into polymer fragments within six weeks. These results suggest that H40-P(LA-DOX)-b-PEG-OH/FA micelles could be a promising nanocarrier with excellent in vivo stability for targeting the drugs to cancer cells and releasing the drug molecules inside the cells by sensing the acidic environment of the endosomal compartments.

Amphiphilic multi-arm block copolymer based on hyperbranched polyester, poly(L-lactide) and poly(ethylene glycol) as a drug delivery carrier

A novel type of biodegradable/biocompatible amphiphilic hyperbranched copolymer (H40-PLA-b-MPEG) was synthesized. Its micellar properties were studied by DLS, fluorescence spectroscopy and TEM. The drug release profile showed that the H40-PLA-b-MPEG micelles provide an initial burst release, followed by a sustained release of the entrapped hydrophobic model drug over a period of 4 to 58 h. The copolymer degraded hydrolytically within 6 weeks under physiological conditions. The MTT assay showed no obvious cytotoxicity against a human endothelial cell line at a concentration range of 0-400 microg x mL(-1). These results indicate that the H40-PLA-b-MPEG micelles have great potential as hydrophobic drug delivery carriers.

Folate-conjugated amphiphilic hyperbranched block copolymers based on Boltorn H40, poly(L-lactide) and poly(ethylene glycol) for tumor-targeted drug delivery

Folate-conjugated amphiphilic hyperbranched block copolymer (H40-PLA-b-MPEG/PEG-FA) with a dendritic Boltorn H40 core, a hydrophobic poly(l-lactide) (PLA) inner shell and a hydrophilic methoxy poly(ethylene glycol) (MPEG) and folate-conjugated poly(ethylene glycol) (PEG-FA) outer shell was synthesized as a carrier for tumor-targeted drug delivery. The block copolymer was characterized using (1)H NMR and gel permeation chromatography (GPC) analysis. Due to its core-shell structure, this block polymer forms unimolecular micelles in aqueous solutions. The micellar properties of H40-PLA-b-MPEG/PEG-FA block copolymer were extensively studied by dynamic light scattering (DLS), fluorescence spectroscopy, and transmission electron microscopy (TEM). An anticancer drug, doxorubicin in the free base form (DOX) was encapsulated into H40-PLA-b-MPEG/PEG-FA micelles. The DOX-loaded micelles provided an initial burst release (up to 4h) followed by a sustained release of the entrapped DOX over a period of about 40 h. Cellular uptake of the DOX-loaded H40-PLA-b-MPEG/PEG-FA micelles was found to be higher than that of the DOX-loaded H40-PLA-b-MPEG micelles because of the folate-receptor-mediated endocytosis, thereby providing higher cytotoxicity against the 4T1 mouse mammary carcinoma cell line. In vitro degradation studies revealed that the H40-PLA-b-MPEG/PEG-FA block copolymer hydrolytically degraded into polymer fragments within six weeks. These results indicated that the micelles prepared from the H40-PLA-b-MPEG/PEG-FA block copolymer have great potential as tumor-targeted drug delivery nanocarriers.

Biodegradable and biocompatible multi-arm star amphiphilic block copolymer as a carrier for hydrophobic drug delivery

Multi-arm star amphiphilic block copolymers (SABCs) with approximately 32 arms were synthesized and characterized for drug delivery applications. A hyperbranched polyester, boltorn H40 (H40), was used as the macroinitiator for the ring-opening polymerization of epsilon-caprolactone (epsilon-CL). The resulting multi-arm H40-poly(epsilon-caprolactone) (H40-PCL-OH) was further reacted with carboxyl terminated methoxy poly(ethylene glycol) (MPEG-COOH) to form H40-PCL-b-MPEG copolymers. The resulting SABCs were characterized by (1)H NMR spectroscopy and gel permeation chromatography (GPC). The critical aggregation concentration (CAC) of H40-PCL-b-MPEG was 3.8 mg/L as determined by fluorescence spectrophotometry. Below the CAC, stable unimolecular micelles were formed with an average diameter of 18 nm as measured by TEM. Above the CAC, unimolecular micelles exhibited agglomeration with an average diameter of 98 nm. The hydrodynamic diameter of these agglomerates was found to be 122 nm, as measured by dynamic light scattering (DLS). The drug loading efficacy of the H40-PCL-b-MPEG micelles was 26 wt%. Drug release study showed an initial burst followed by a sustained release of the entrapped hydrophobic model drug, 5-fluorouracil, over a period of 9-140 h. These results indicate that the H40-PCL-b-MPEG micelles have great potential as hydrophobic drug delivery carriers.

Recent Advances in Star Polymer Design: Degradability and the Potential for Drug Delivery

The use of polymers as drug delivery devices represents an exciting area of development in the biomedical industry. This paper briefly highlights some of the different types of macromolecules that have attracted attention as potential drug delivery devices, with a particular focus on the class of star polymers known as core cross-linked star (CCS) polymers. The ability to control the rate at which encapsulated molecules can be released is an important factor in the design of efficient drug delivery devices. In this regard, several different techniques to incorporate degradable functionality into CCS polymers are examined as a potential means of controlling release kinetics.