The Effect of Topology on Block Copolymer Nanoparticles: Linear versus Star Block Copolymers in Toluene

Linear and star block copolymer (BCP) nanoparticles of (polystyrene-block-poly(4-vinylpyridine))_n (PS-b-P4VP)_n with arm numbers of 1, 2, 3, and 4 were prepared by two methods of polymerization-induced self-assembly (PISA) and general self-assembly of block copolymers in the low-polar organic solvent, toluene. The effect of the arm number on the size and/or morphology of the (PS-b-P4VP)_n nanoassemblies synthesized by the two methods in toluene and on the polymerization kinetics was investigated in detail. Our results show that in toluene, a low-polar solvent, the topology not only affected the morphology of the BCP nanoparticles prepared by PISA, but also influenced the BCP nanoparticles synthesized through general self-assembly.

Thermoresponsive Self-Assembly of Twofold Fluorescently Labeled Block Copolymers in Aqueous Solution and Microemulsions

A nonionic double hydrophilic block copolymer with a long permanently hydrophilic and a small thermoresponsive block is synthesized by reversible addition-fragmentation chain-transfer polymerization (RAFT). By employing a specifically designed chain-transfer agent, the polymer is functionalized with complementary end groups which are suited for Förster resonance energy transfer (FRET). The end group attached to the permanently hydrophilic block of poly(N,N-dimethylacrylamide) pDMAm is designed as a permanently hydrophobic segment ("sticker") comprising a long alkyl chain and the 4-aminonaphthalimide fluorophore. The other end attached to the thermoresponsive block of poly(N-isopropylacrylamide) pNiPAm incorporates a coumarin fluorophore. The temperature-dependent self-assembly of the twofold fluorescently labeled copolymer is studied in pure aqueous solution as well as in an o/w microemulsion by several techniques including turbidimetry, dynamic light scattering (DLS), and fluorescence spectroscopy. It is compared to the behaviors of the analogous twofold-labeled pDMAm and pNiPAm homopolymer references. The findings indicate that the block copolymer behaves as a polymeric surfactant at low temperatures, with one relatively small hydrophobic end block and an extended hydrophilic chain forming "hairy micelles". At elevated temperatures above the LCST phase transition of the pNiPAm block, however, the copolymer behaves as an associative telechelic polymer with two nonsymmetrical hydrophobic end blocks, which do not mix. Thus, instead of a network of bridged "flower micelles", large dynamic aggregates are formed. These are connected alternatingly by the original micellar cores as well as by clusters of the collapsed pNiPAm blocks. This type of structure is even more favored in the o/w microemulsion than in pure aqueous solution, as the microemulsion droplets constitute an attractive anchoring point for the hydrophobic dodecyl sticker but not for the collapsed pNiPAm chains.

Double hydrophilic copolymers - synthetic approaches, architectural variety, and current application fields

Solubility and functionality of polymeric materials are essential properties determining their role in any application. In that regard, double hydrophilic copolymers (DHC) are typically constructed from two chemically dissimilar but water-soluble building blocks. During the past decades, these materials have been intensely developed and utilised as, e.g., matrices for the design of multifunctional hybrid materials, in drug carriers and gene delivery, as nanoreactors, or as sensors. This is predominantly due to almost unlimited possibilities to precisely tune DHC composition and topology, their solution behavior, e.g., stimuli-response, and potential interactions with small molecules, ions and (nanoparticle) surfaces. In this contribution we want to highlight that this class of polymers has experienced tremendous progress regarding synthesis, architectural variety, and the possibility to combine response to different stimuli within one material. Especially the implementation of DHCs as versatile building blocks in hybrid materials expanded the range of water-based applications during the last two decades, which now includes also photocatalysis, sensing, and 3D inkjet printing of hydrogels, definitely going beyond already well-established utilisation in biomedicine or as templates.

Exploration of the modification-induced self-assembly (MISA) technique and the preparation of nano-objects with a functional poly(acrylic acid) core

The hydrolysis-based post-polymerization modification method was introduced into the self-assembly process and a modification-induced self-assembly (MISA) technique was presented.

Self-assembly of dual-responsive amphiphilic POEGMA-b-P4VP-b-POEGMA triblock copolymers: effect of temperature, pH, and complexation with Cu2+

Amphiphilic and dual-responsive triblock copolymer POEGMA-b-P4VP-b-POEGMA synthesized by RAFT self-assemble into spherical or interconnected micelles depending on the external stimulus and their complexation with Cu2+ results in responsive nanogels.

Poly(N,N-bis(2-methoxyethyl)acrylamide), a thermoresponsive non-ionic polymer combining the amide and the ethyleneglycolether motifs

Poly(N,N-bis(2-methoxyethyl)acrylamide) (PbMOEAm) featuring two classical chemical motifs from non-ionic water-soluble polymers, namely, the amide and ethyleneglycolether moieties, was synthesized by reversible addition fragmentation transfer (RAFT) polymerization. This tertiary polyacrylamide is thermoresponsive exhibiting a lower critical solution temperature (LCST)–type phase transition. A series of homo- and block copolymers with varying molar masses but low dispersities and different end groups were prepared. Their thermoresponsive behavior in aqueous solution was analyzed via turbidimetry and dynamic light scattering (DLS). The cloud points (CP) increased with increasing molar masses, converging to 46 °C for 1 wt% solutions. This rise is attributed to the polymers’ hydrophobic end groups incorporated via the RAFT agents. When a surfactant-like strongly hydrophobic end group was attached using a functional RAFT agent, CP was lowered to 42 °C, i.e., closer to human body temperature. Also, the effect of added salts, in particular, the role of the Hofmeister series, on the phase transition of PbMOEAm was investigated, exemplified for the kosmotropic fluoride, intermediate chloride, and chaotropic thiocyanate anions. A pronounced shift of the cloud point of about 10 °C to lower or higher temperatures was observed for 0.2 M fluoride and thiocyanate, respectively. When PbMOEAm was attached to a long hydrophilic block of poly(N,N-dimethylacrylamide) (PDMAm), the cloud points of these block copolymers were strongly shifted towards higher temperatures. While no phase transition was observed for PDMAm-b-pbMOEAm with short thermoresponsive blocks, block copolymers with about equally sized PbMOEAm and PDMAm blocks underwent the coil-to-globule transition around 60 °C.

Reversible Addition?Fragmentation Chain-Transfer Polymerization of Amphiphilic Polycarboxybetaines and Their Molecular Interactions

In this work, we report the first molecular weight-controlled amphiphilic polybetaine synthesis using various hydrocarbons via reversible addition?fragmentation chain-transfer (RAFT) polymerization. The experimental separation of the alkyl aminocrotonate tautomers, which has been the subject of debate, was completed for the first time. The enamine form of these tautomers was further used as a monomer for the RAFT polymerization of amphiphilic polycarboxybetaines. Self-assembly of the amphiphilic polycarboxybetaines showed micelle structures from spherical, rod-like to fractal in the aqueous media due to the competition between both electrostatic and hydrophobic forces. Hydrophobically dominant interactions among amphiphilic polycarboxybetaines and long-chain hydrocarbon alkane molecules were investigated to understand long-chain hydrocarbon alkane crystallization using alkane crystal deposition and viscosity experiments. Strong hydrophobic forces between poly(hexadecyl-grafted aminocrotonate?methacrylic acid) and long-chain hydrocarbon alkane molecules changed the surface properties of the long-chain hydrocarbon alkane nucleus and inhibited the growth of paraffin crystals.

ABA-type triblock copolymer micellar system with lower critical solution temperature-type sol-gel transition

A temperature sensitive sol-gel transition induced by the self-assembly of amphiphilic copolymers and its application in industry have been the objects of increasing study. We demonstrate here a two-step, reversible addition-fragmentation chain transfer (RAFT) polymerization of an ABA-type copolymer consisting of poly(N,N-dimethylacrylamide)-b-poly(diacetone acrylamide)-b-poly(N,N-dimethylacrylamide) (PDMAA-b-PDAAM-b-PDMAA). This copolymer can be easily dispersed in water, and this dispersion is critical for its lower critical solution temperature (LCST)-type sol-gel transition, which was monitored using dynamic light scattering (DLS), transmission electron microscopy (TEM), and rheology analysis, in addition to temperature-dependent ¹H nuclear magnetic resonance (¹H NMR) and Fourier transform infrared spectroscopy (FTIR). Results revealed an abnormal sphere-to-worm micellar transition of this ABA copolymer at the LCST point, which could be affected by the length of the PDAAM block (B-block), the length as well as the distribution of the PDMAA block (A-block), and the concentration of the copolymer dispersion. Thus, copolymer dispersion could be feasibly used for drug loading at a low temperature, which could then be transformed into a gel at an elevated temperature. The loading and controllable release of the model drug of paracetamol into and out of a copolymer gel was further determined. The sustained release behavior was also studied using the Rigter-Peppas model.

Hydrophobically Modified Polycarboxybetaine: From Living Radical Polymerization to Self-Assembly

Polybetaines have received widespread attention due to their smart response properties and structures which resemble biological polymers like peptides and DNA. However, few studies have focused on the controlled synthesis and self-assembly of hydrophobically modified polybetaines due to the difficulty of synthesizing these materials. We report the first molecular weight-controlled synthesis of hydrophobically modified polycarboxybetaines (HMPCB). Poly(dodecyl grafted aminocrotonate -methacrylic acid) (P(DACRO-MAA)) was synthesized via the reversible addition-fragmentation chain-transfer (RAFT) polymerization approach. The two different tautomers of the monomer were also successfully identified and separated via thin layer chromatography (TLC) and column chromatography, making it possible to obtain pure polycarboxybetaine via RAFT synthesis. Both the successfully separated enamine form of the monomer and the resulting polycarboxybetaine were confirmed via FTIR and NMR. The polycarboxybetaine was found to have a low polydispersity (PDI) of 1.214, and its molecular weight was determined as 70590 g/mol via gel permeation chromatography (GPC) measurements. Spherical, rodlike, and fractal assembled structures for the P(DACRO-MAA) were observed with pH change using TEM, zeta sizer, and dynamic light scattering (DLS). The unique self-assembled structures of HMPCB synthesized via RAFT provide an opportunity to understand fundamental polymer science and can be engineered for broad applications.

Loop-stabilized BAB triblock copolymer morphologies by PISA in water

Assemblies of BAB triblock copolymers are prepared by PISA via aqueous RAFT dispersion polymerization. The importance of charges in the middle of the hydrophilic stabilizer loops is highlighted.

A comparison study to investigate the effect of the drug-loading site on its delivery efficacy using double hydrophilic block copolymer-based prodrugs

Polymeric delivery vehicles can improve the safety and efficacy of chemotherapy drugs by facilitating preferential tumor delivery. Double hydrophilic block copolymer (DHBC)-based prodrugs are considered as ideal candidates for drug delivery due to the elegant integration of benefits from both structures including polymeric prodrugs' superior protection and minimal premature drug release using covalent links and a DHBC-based "green" self-assembly strategy by a simple stimulus in a pure aqueous phase without the use of any organic solvent. Clearly, the location of drug molecules in the polymeric prodrugs has exerted a significant effect on their therapeutic efficiency. However, there has been no published data so far, to our knowledge, reporting the effect of drug-conjugated sites on its therapeutic efficacy, as well as some basic guidelines that can be followed to direct the future design of polymeric prodrugs. To this end, herein a thermo-sensitive DHBC, poly(N-(2-hydroxypropyl) methacrylamide)-b-poly(N-isopropyl acrylamide) (P(HPMA)-b-P(NIPAAm)), was designed and synthesized by successive reversible addition and fragmentation chain transfer (RAFT) polymerizations, and was chosen as a platform to clarify this issue. An anti-cancer drug, doxorubicin (DOX) was conjugated to the hydrophilic PHPMA block and the temperature-responsive P(NIPAAm) block, respectively, through a pH-liable hydrazone bond to fabricate two different types of polymeric prodrugs with the drug tethered to the micellar hydrophilic PHPMA shell or encapsulated within the hydrophobic P(NIPAAm) core upon temperature elevation above its lower critical solution temperature (LCST). A detailed comparison study was carried out to investigate which structure exhibits better properties and higher therapeutic efficacy in terms of micellar size, stability, cellular uptake, drug loading capacity, drug release behaviors and cell viability. The results showed the self-assembly of both DHBC-based prodrugs into well-dispersed spherical micelles with similar average hydrodynamic diameters (D_h) around 150 nm in phosphate buffer (PBS, pH 7.4) at 37 °C, but a higher drug loading content (DLC), and enhanced pH-mediated drug release, i.e., much accelerated drug release at pH 5.0, while slower at pH 7.4, as well as enhanced cytotoxicity when the drug was conjugated to the hydrophilic shell of the micelles. The guidelines obtained in this study are thus believed to direct the future design and development of polymeric prodrugs for efficient cancer therapy.

Double thermoresponsive pentablock copolymers: synthesis by one-pot RAFT polymerization and self-assembly in aqueous solutions

Pentablock copolymers synthesized by one-pot successive RAFT polymerization are double thermoresponsive and exhibit block sequence dependent aggregation in aqueous solutions.

Dual transitions of toothbrush-like double hydrophilic block copolymers

An interesting thermo-regulated dual transition from unimers to vesicles, and finally to micelles, was reported for the first time based on a toothbrush-like double hydrophilic block copolymer.

Supramolecular polymer networks: hydrogels and bulk materials

Supramolecular polymer networks are materials crosslinked by reversible supramolecular interactions, such as hydrogen bonding or electrostatic interactions. Supramolecular materials show very interesting and useful properties resulting from their dynamic nature, such as self-healing, stimuli-responsiveness and adaptability. Here we will discuss recent progress in polymer-based supramolecular networks for the formation of hydrogels and bulk materials.

One-pot preparation of BAB triblock copolymer nano-objects through bifunctional macromolecular RAFT agent mediated dispersion polymerization

Nano-assemblies of a BAB triblock copolymer containing a solvophilic A block and two solvophobic B blocks were prepared through dispersion RAFT polymerization.

Thermoresponsive self-assembled NiPAm-zwitterion copolymers

We incorporated temperature sensitive NiPAm with zwitterionic monomers (CBMA and SBMA), synthesized the statistical copolymers poly(NiPAm-co-CBMA) and poly(NiPAm-co-SBMA), and investigated their self-assembly and thermoresponsive properties.

Double thermoresponsive di- and triblock copolymers based on N-vinylcaprolactam and N-vinylpyrrolidone: synthesis and comparative study of solution behaviour

Controlled radical polymerization produces poly(N-vinylamide)s with thermally induced multistep assembly.

Seeded dispersion RAFT polymerization and synthesis of well-defined ABA triblock copolymer flower-like nanoparticles

Flower-like triblock copolymer nanoparticles containing a central looped solvophilic block and two outer solvophobic blocks are prepared by seeded dispersion RAFT polymerization.

Dispersion RAFT polymerization: comparison between the monofunctional and bifunctional macromolecular RAFT agents

The dispersion RAFT polymerizations mediated with monofunctional and bifunctional macro-RAFT agents were comparatively studied, in which different block copolymer morphologies were detected.

Thermoresponsive and Redox Behaviors of Poly(N-isopropylacrylamide)-Based Block Copolymers Having TEMPO Groups as Their Side Chains

Thermoresponsive and redox-active block copolymers having 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) moieties have been synthesized by using the reversible addition-fragmentation chain transfer (RAFT) polymerization technique.N-Isopropylacrylamide (NIPAAm) and 2,2,6,6-tetramethylpiperidyl methacrylate (TEMPMA) monomers were copolymerized stepwise under RAFT polymerization conditions to afford the thermoresponsive block copolymers, PNIPAAm-block-PTEMPMA and PNIPAAm-block-PTEMPMA-block-PNIPAAm. Oxidation of tetramethylpiperidine groups in the copolymers successfully afforded the corresponding TEMPO-containing block copolymers. The resulting triblock copolymer was found to be thermoresponsive showing lower critical solution temperature (LCST) at 34∘C in its aqueous solution. Redox behavior of the resulting copolymer was observed by cyclic voltammetry. The potential of anodic current peak changed below and above the LCST of the block copolymer. These results indicate that the phase transition of thermoresponsive polymer influences the redox potential of TEMPO moieties.

Thermoresponsive hydrogels from symmetrical triblock copolymers poly(styrene-block-(methoxy diethylene glycol acrylate)-block-styrene)

A series of symmetrical, thermo-responsive triblock copolymers was prepared by reversible addition-fragmentation chain transfer (RAFT) polymerization, and studied in aqueous solution with respect to their ability to form hydrogels. Triblock copolymers were composed of two identical, permanently hydrophobic outer blocks, made of low molar mass polystyrene, and of a hydrophilic inner block of variable length, consisting of poly(methoxy diethylene glycol acrylate) PMDEGA. The polymers exhibited a LCST-type phase transition in the range of 20-40 °C, which markedly depended on molar mass and concentration. Accordingly, the triblock copolymers behaved as amphiphiles at low temperatures, but became water-insoluble at high temperatures. The temperature dependent self-assembly of the amphiphilic block copolymers in aqueous solution was studied by turbidimetry and rheology at concentrations up to 30 wt %, to elucidate the impact of the inner thermoresponsive block on the gel properties. Additionally, small-angle X-ray scattering (SAXS) was performed to access the structural changes in the gel with temperature. For all polymers a gel phase was obtained at low temperatures, which underwent a gel-sol transition at intermediate temperatures, well below the cloud point where phase separation occurred. With increasing length of the PMDEGA inner block, the gel-sol transition shifts to markedly lower concentrations, as well as to higher transition temperatures. For the longest PMDEGA block studied (DP(n) about 450), gels had already formed at 3.5 wt % at low temperatures. The gel-sol transition of the hydrogels and the LCST-type phase transition of the hydrophilic inner block were found to be independent of each other.

Living Radical Polymerization by the RAFT Process – A Third Update

This paper provides a third update to the review of reversible deactivation radical polymerization (RDRP) achieved with thiocarbonylthio compounds (ZC(=S)SR) by a mechanism of reversible addition-fragmentation chain transfer (RAFT) that was published in June 2005 (Aust. J. Chem. 2005, 58, 379). The first update was published in November 2006 (Aust. J. Chem. 2006, 59, 669) and the second in December 2009 (Aust. J. Chem. 2009, 62, 1402). This review cites over 700 publications that appeared during the period mid 2009 to early 2012 covering various aspects of RAFT polymerization which include reagent synthesis and properties, kinetics and mechanism of polymerization, novel polymer syntheses, and a diverse range of applications. This period has witnessed further significant developments, particularly in the areas of novel RAFT agents, techniques for end-group transformation, the production of micro/nanoparticles and modified surfaces, and biopolymer conjugates both for therapeutic and diagnostic applications.

Temperature-induced self-assembly of triple-responsive triblock copolymers in aqueous solutions

A series of triple-thermoresponsive triblock copolymers from poly(N-n-propylacrylamide) (PNPAM, A), poly(methoxydiethylene glycol acrylate) (PMDEGA, B), and poly(N-ethylacrylamide) (PNEAM, C) was synthesized by sequential reversible addition-fragmentation chain transfer polymerizations. Polymers of differing block sequences, ABC, BAC, and ACB, with increasing phase transition temperatures in the order A < B < C were prepared. Their aggregation behavior in dilute aqueous solution was investigated using dynamic light scattering, turbidimetry, and NMR spectroscopy. The self-organization of such polymers was found to dependent strongly on the block sequence. While polymers with a terminal low-LCST (lower critical solution temperature) block undergo aggregation above the first phase transition temperature at 20-25 °C, triblock copolymers with the low-LCST block in the middle show aggregation only above the second phase transition. The collapse of the middle block is not sufficient to induce aggregation but produces instead stable, unimolecular micelles with a collapsed middle block, as supported by NMR and fluorescence probe data. Continued heating of all copolymers led to two additional thermal transitions at 40-55 and 70-80 °C, which could be correlated to the phase transitions of the B and C blocks, respectively. All polymers show a high tendency for cluster formation, once aggregation is induced. The carrier abilities of the triple responsive triblock copolymers for hydrophobic agents were probed with the solvatochromic fluorescence dye Nile Red. With passing through the first thermal transition, the block copolymers are capable of solubilizing Nile Red. In the case of block copolymers with sequences ABC or ACB, which bear the low-LCST block at one terminus, notable amounts of dye are solubilized already at this stage. In contrast, the hydrophobic probe is much less efficiently incorporated by the BAC triblock copolymer, which forms unimolecular micelles. Only after the collapse of the B block, when reaching the second phase transition at about 45 °C, does aggregation occur and solubilization becomes efficient. In the case of ABC and ACB polymers, the hydrophobic probe seems to partition between the originally collapsed A chains and the additional hydrophobic chains formed after the collapse of the less hydrophobic B block.

Fast thermoresponsive BAB-type HEMA/NIPAAm triblock copolymer solutions for embolization of abnormal blood vessels

Thermoresponsive BAB-type HEMA/NIPAAm triblock copolymers (A = NIPAAm, B = HEMA) were prepared by atomic transfer radical polymerization (ATRP). BAB1-6 with shorter PNIPAAm blocks failed to form stable gel; while a relatively stable gel could be achieved by BAB1-8 with longer PNIPAAm blocks when copolymer aqueous solution was heated up. Introducing radiopaque agent (RA) was shown to slightly increase the transition temperature and gelation time, but the gelling ability was strengthened due to slightly weakening dehydration of copolymer in the mixture of water and RA. BAB1-8 aqueous solution about 5 wt% in the presence of RA was demonstrated to successfully occlude the cerebral rete mirabiles (RMs) and renal arteries of pigs. Within 3-month surgery, no recanalization was observed and the embolized kidney shrank considerably. Histological assay of embolized kidney demonstrated interstitial fibrosis and calcification as well as the thickening of renal small artery. This temperature sensitive copolymer with well-defined architecture holds a great potential as an embolic agent for treating arteriovenous malformations (AVMs) and renal disease due to the design flexibility of ATRP.