Fabrication of doxorubicin conjugated methoxy poly(ethylene glycol)-block-poly(ε-caprolactone) nanoparticles and study on their in vitro antitumor activities

The purpose of this study was to develop a novel drug-polymer conjugation (mPEG-b-PCL-DOX) and study on its toxicity, bio-safety, and in vitro antitumor activity of mPEG-b-PCL-DOX. The polymer methoxy poly(ethylene glycol)-block-poly(ε-caprolactone) (mPEG-b-PCL) was prepared by ring-opening polymerization. Then, succinic anhydride was reacted with mPEG-b-PCL via esterification reaction to produce mPEG-b-PCL-COOH. Finally, the polymer mPEG-b-PCL-DOX was obtained by conjugating DOX to mPEG-b-PCL-COOH by amidation. The Fourier transform infrared spectroscopy (FTIR) and ¹H nuclear magnetic resonance (¹H NMR) spectra were used to study the structures of obtained polymers. Transmission electron microscope (TEM) and Dynamic laser scattering (DLS) were employed to monitor the morphology and size distribution of mPEG-b-PCL-DOX nanoparticles (NPs). The mPEG-b-PCL-DOX NPs were administrated to KM rats by intraperitoneal injection to study the bio-safety of final NPs. The cell uptake and in vitro anti-tumor activity of final NPs were carried out with HCT116 cells as models. FTIR and ¹H NMR spectra confirmed the obtaining of mPEG-b-PCL-DOX. The fabricated NPs were in round shapes with an average diameter of 300 nm. These NPs did not induce hemolysis and physiological or pathological changes in rats's organs. Finally, cell teats showed that these NPs could be endocytosed by HCT 116 cells, and they had better anti-tumor effects than free DOX did. Therefore, the mPEG-b-PCL-DOX NPs had a potential application in anti-cancer therapy.

Tuning layered superstructures in precision polymers

An approach to influence and control layered superstructures by varying the methylene sequence length between two consecutive functional groups in linear precision polymers containing 2,6-diaminopyridine (DAP) groups is presented. Layered superstructures with repeating units involving three monomeric units along the chain direction with very high coherence lengths upto 110 nm are observed in case of shorter alkyl segments, (16 and 18 [Formula: see text] units), while more conventional layer superstructures incorporating only one monomer are found for related polymers with 20 [Formula: see text] units per methylene sequence. A building block model explaining the unusually large periodicity of three monomeric units is proposed wherein layers containing crystalline or amorphous methylene sequences occur in different combinations. Occurrence of different layered structures depending on crystallization conditions, methylene sequence length as well as functional group type is explained by a competition of H-interactions between the DAP groups and the van der Waal forces between the hydrophobic methylene groups.

Hybrid polymers bearing oligo-l-lysine(carboxybenzyl)s: synthesis and investigations of secondary structure

Hybrid polymers of peptides resembling (partially) folded protein structures are promising materials in biomedicine, especially in view of folding-interactions between different segments. In this study polymers bearing repetitive peptidic folding elements, composed of N-terminus functionalized bis-ω-ene-functional oligo-l-lysine(carboxybenzyl(Z))s (Lys_n) with repeating units (n) of 3, 6, 12, 24 and 30 were successfully synthesized to study their secondary structure introduced by conformational interactions between their chains. The pre-polymers of ADMET, narrowly dispersed Lys_ns, were obtained by ring opening polymerization (ROP) of N-carboxyanhydride (NCA) initiated with 11-amino-undecene, following N-terminus functionalization with 10-undecenoyl chloride. The resulting Lys_ns were subsequently polymerized via ADMET polymerization by using Grubbs’ first generation (G1) catalyst in 1,1,1,3,3,3-hexafluoroisopropanol (HFIP) generating the ADMET polymers (A-[Lys_n]_m) (m = 2–12) with molecular weights ranging from 3 to 28 kDa, displaying polydispersity (Đ) values in the range of 1.5–3.2. After chemical analyses of Lys_ns and A-[Lys_n]_ms by ¹H-NMR, GPC and MALDI-ToF MS, secondary structural investigations were probed by CD spectroscopy and IR spectroscopy in 2,2,2-trifluoroethanol (TFE). In order to study A-[Lys_n]_ms with defined molecular weights and low polydispersity values (Đ = 1.03–1.48), the ADMET polymers A-[Lys_n=3]_m=3 and A-[Lys_n=24]_m=4 were fractionated by preparative GPC, and subsequently analysed by ¹H-NMR, analytical GPC, MALDI-ToF MS and CD spectroscopy. We can demonstrate the influence of chain length of the generated polymers on the formation of secondary structures by comparing Lys_ns with varying n values to the ADMET-polymers with the help of spectroscopic techniques such as CD and FTIR-spectroscopy in a helicogenic solvent.

We demonstrate the influence of chain length of segmented polymers bearing dynamic folding elements onto the formation of secondary structures with the help of spectroscopic techniques such as CD and FTIR-spectroscopy in a helicogenic solvent.

Synthetic Macromolecular Antibiotic Platform for Inhalable Therapy against Aerosolized Intracellular Alveolar Infections

Lung-based intracellular bacterial infections remain one of the most challenging infectious disease settings. For example, the current standard for treating Franciscella tularensis pneumonia (tularemia) relies on administration of oral or intravenous antibiotics that poorly achieve and sustain pulmonary drug bioavailability. Inhalable antibiotic formulations are approved and in clinical development for upper respiratory infections, but sustained drug dosing from inhaled antibiotics against alveolar intracellular infections remains a current unmet need. To provide an extended therapy against alveolar intracellular infections, we have developed a macromolecular therapeutic platform that provides sustained local delivery of ciprofloxacin with controlled dosing profiles. Synthesized using RAFT polymerization, these macromolecular prodrugs characteristically have high drug loading (16-17 wt % drug), tunable hydrolysis kinetics mediated by drug linkage chemistry (slow-releasing alkyllic vs fast-releasing phenolic esters), and, in general, represent new fully synthetic nanotherapeutics with streamlined manufacturing profiles. In aerosolized and completely lethal F.t. novicida mouse challenge models, the fast-releasing ciprofloxacin macromolecular prodrug provided high cure efficiencies (75% survival rate under therapeutic treatment), and the importance of release kinetics was demonstrated by the inactivity of the similar but slow-releasing prodrug system. Pharmacokinetics and biodistribution studies further demonstrated that the efficacious fast-releasing prodrug retained drug dosing in the lung above the MIC over a 48 h period with corresponding C_max/MIC and AUC_0-24h/MIC ratios being greater than 10 and 125, respectively; the thresholds for optimal bactericidal efficacy. These findings identify the macromolecular prodrug platform as a potential therapeutic system to better treat alveolar intracellular infections such as F. tularensis, where positive patient outcomes require tailored antibiotic pharmacokinetic and treatment profiles.

A strategy for sequence control in vinyl polymers via iterative controlled radical cyclization

There is a growing interest in sequence-controlled polymers toward advanced functional materials. However, control of side-chain order for vinyl polymers has been lacking feasibility in the field of polymer synthesis because of the inherent feature of chain-growth propagation. Here we show a general and versatile strategy to control sequence in vinyl polymers through iterative radical cyclization with orthogonally cleavable and renewable bonds. The proposed methodology employs a repetitive and iterative intramolecular cyclization via a radical intermediate in a one-time template with a radical-generating site at one end and an alkene end at the other, each of which is connected to a linker via independently cleavable and renewable bonds. The unique design specifically allowed control of radical addition reaction although inherent chain-growth intermediate (radical species) was used, as well as the iterative cycle and functionalization for resultant side chains, to lead to sequence-controlled vinyl polymers (or oligomers).

Synthesis and Controlled Release Behavior of Biodegradable Polymers with Pendant Ibuprofen Group

The continuous use of nonsteroidal anti-inflammatory drugs such as ibuprofen frequently leads to some serious side-effects including stomach ulcers and bleeding. In this paper, two kinds of new biocompatible polyesters (PIGB, PIGH) and polyester-amide (PIGA) comprising biodegradable components (L-glutamic acid,1,4-butanediol, and1,6-hexanediol and6-amino hexanol) and ibuprofen as pendant group have been prepared by the melting polycondensation. The chemical structures of the monomer and polymers are characterized by FTIR,1H NMR spectrum, GPC, and contact angle measurements. The drug loading of ibuprofen reaches very high level (35–37%) for PIGB, PIGH, and PIGA carriers. The free ibuprofen molecules are releasedin vitrofrom polymer carriers in a controlled manner without a burst release, different from the release pattern observed in the other drug-encapsulated systems. It is also found that the different hydrophilicity among PIGB, PIGH, and PIGA plays a key role in the time-controlled release of ibuprofen. In addition, the viability of HeLa cells after 48 h of incubation reaches more than 100%, indicating no cytotoxicity for PIGB, PIGH, and PIGA carriers.

Functional α,ω-dienes via thiol-Michael chemistry: synthesis, oxidative protection, acyclic diene metathesis (ADMET) polymerization and radical thiol–ene modification

The synthesis of the novel α,ω-diene 2-(undec-10-en-1-yl)tridec-12-en-1-yl acrylate is described.