Synthesis and Characterization of Poly(acrylic acid) Brushes: “Grafting-Onto” Route

Grafted chitosan thin films of various degrees of acetylation as a reusable platform for the investigation of biological interactions

Surface treatment by adhesive polymers is a promising solution to immobilize and study bacteria cells through microscopic assays and, for example, control their growth or determine their susceptibility to antibiotic treatment. The stability of such functional films in wet conditions is crucial, as the film degradation would compromise a persistent use of the coated devices. In this work, low roughness chitosan thin films of degrees of acetylation (DA) ranging from 0.5 % to 49 % were chemically grafted onto silicon and glass substrates and we have demonstrated how the physicochemical properties of the surfaces and the bacterial response were DA-dependent. A fully deacetylated chitosan film presented an anhydrous crystalline structure while the hydrated crystalline allomorph was the preferred structure at higher DA. Moreover, their hydrophilicity increased at higher DA, leading to higher film swelling. Low DA chitosan-grafted substrate favored bacterial growth away from the surface and could be envisioned as bacteriostatic surfaces. Contrarily, an optimum of Escherichia coli adhesion was found for substrates modified with chitosan of DA = 35 %: these surfaces are adapted for the study of bacterial growth and antibiotic testing, with the possibility of reusing the substrates without affecting the grafted film - ideal for limiting single-use devices.

Preparation of highly stable and ultrasmooth chemically grafted thin films of chitosan

Chitosan-coated surfaces are of great interest for biomedical applications (antibacterial coatings, implants, would healing, single-cell microfluidics…). However, one major limitation of chitosan-based systems is the high solubility of the polymer under acidic aqueous conditions. Herein, we describe a simple procedure to prepare extremely smooth and stable chitosan coatings. In detail, chitosan films with a low degree of N-acetylation and of thicknesses varying from 40 nm to 10 μm were grafted onto epoxy-functionalized silicon wafers via an optimized water-temperature treatment (WTT). The formation of a grafted chitosan network insoluble in acidic aqueous media (pH 3.5) was evidenced and the films were stable for at least 2 days at pH 3.5. The film morphology and the swelling behavior were characterized by atomic force microscopy (AFM) and neutron reflectivity, which showed that the film roughness was extremely low. The physical cross-linking of the films was demonstrated using infrared spectroscopy, dynamic mechanical analysis (DMA) and wide-angle X-ray scattering (WAXS). Finally, we show that the swelling behavior of such films was largely influenced by the environmental conditions, such as the pH or ionic strength of the solution.

Responsive Adsorption of N-Isopropylacrylamide Based Copolymers on Polymer Brushes

We investigate the adsorption of pH- or temperature-responsive polymer systems by ellipsometry and neutron reflectivity. To this end, temperature-responsive poly (N-isopropylacrylamide) (PNIPAM) brushes and pH-responsive poly (acrylic acid) (PAA) brushes have been prepared using the "grafting onto" method to investigate the adsorption process of polymers and its reversibility under controlled environment. To that purpose, macromolecular brushes were designed with various chain lengths and a wide range of grafting density. Below the transition temperature (LCST), the characterization of PNIPAM brushes by neutron reflectivity shows that the swelling behavior of brushes is in good agreement with the scaling models before they collapse above the LCST. The reversible adsorption on PNIPAM brushes was carried out with linear copolymers of N-isopropylacrylamide and acrylic acid, P(NIPAM-co-AA). While these copolymers remain fully soluble in water over the whole range of temperature investigated, a quantitative adsorption driven by solvophobic interactions was shown to proceed only above the LCST of the brush and to be totally reversible upon cooling. Similarly, the pH-responsive adsorption driven by electrostatic interactions on PAA brushes was studied with copolymers of NIPAM and N,N-dimethylaminopropylmethacrylamide, P(NIPAM-co-MADAP). In this case, the adsorption of weak polycations was shown to increase with the ionization of the PAA brush with interactions mainly located in the upper part of the brush at pH 7 and more deeply adsorbed within the brush at pH 9.

Synthesis of naturally-derived macromolecules through simplified electrochemically mediated ATRP

The flavonoid-based macroinitiator was received for the first time by the transesterification reaction of quercetin with 2-bromoisobutyryl bromide. In accordance with the "grafting from" strategy, a naturally-occurring star-like polymer with a polar 3,3',4',5,6-pentahydroxyflavone core and hydrophobic poly(tert-butyl acrylate) (PtBA) side arms was synthesized via a simplified electrochemically mediated ATRP (seATRP), utilizing only 78 ppm by weight (wt) of a catalytic CuII complex. To demonstrate the possibility of temporal control, seATRP was carried out utilizing a multiple-step potential electrolysis. The rate of the polymerizations was well-controlled by applying optimal potential values during preparative electrolysis to prevent the possibility of intermolecular coupling of the growing polymer arms. This appears to be the first report using on-demand seATRP for the synthesis of QC-(PtBA-Br)5pseudo-star polymers. The naturally-derived macromolecules showed narrow MWDs (Đ = 1.08-1.11). 1H NMR spectral results confirm the formation of quercetin-based polymers. These new flavonoid-based polymer materials may find applications as antifouling coatings and drug delivery systems.

Hysteretic memory in pH-response of water contact angle on poly(acrylic acid) brushes

We investigated the pH-dependent response of flat polyacid brushes of varying length and dispersity in the extended brush regime. Our model system consisted of poly(acrylic acid) brushes, which change from hydrophobic and neutral at low pH to hydrophilic and negatively charged at high pH, synthesized on silicon substrates using a grafting-from approach at constant grafting density. We observed three trends in the pH-response: first, the dry brush thickness increased as the pH was increased for brushes above a critical length, and this effect was magnified as the dispersity increased; second, the water contact angle measured at low pH was larger for brushes of greater dispersity; and third, brushes of sufficient dispersity exhibited hysteretic memory behavior in the pH-dependence of the contact angle, in which the contact angle upon increasing and decreasing pH differed. As a consequence, the pKa of the brushes measured upon increasing pH was consistently higher than that measured upon decreasing pH. The observed pH response is consistent with proposed changes in the conformation and charge distribution of the polyelectrolyte brushes that depend on the direction of pH change and the dispersity of the brushes.

Probing pH-responsive interactions between polymer brushes and hydrogels by neutron reflectivity

We investigated the effect of specific interactions on the structure of interfaces between a brush and a hydrogel on the polymer chain length scale. We used a model system for which the interactions between the brush and the gel are switchable. We synthesized weak polyelectrolyte brushes of poly(acrylic acid) and hydrogels of polyacrylamide and poly(N,N-dimethylacrylamide) which interact solely when the poly(acrylic acid) is mainly in its acidic form. The monomer density profiles of the poly(acrylic acid) brush immersed in pure deuterium oxide (D2O) or in contact with a D2O-swollen gel were determined by neutron reflectivity. At pH 2 when the brush is in its neutral form, it interacts with the gel by hydrogen bonds while at pH 9 when the brush is a polyelectrolyte it is not interacting with the gel. Our results show that the presence of interactions with the gel at pH 2 increases the swelling ratio of the brush relative to that in pure D2O, meaning that the brushes exhibit conformations which are more extended from the surface than in the absence of interactions.

Structure of surfaces and interfaces of poly(N,N-dimethylacrylamide) hydrogels

We investigated the surface structure of hydrogels of poly(N,N-dimethylacrylamide) (PDMA) hydrogels synthesized and cross-linked simultaneously by redox free radical polymerization. We demonstrate the existence of a less cross-linked layer at the surface of the gel at least at two different length scales characterized by shear rheology and by neutron reflectivity, suggesting the existence of a gradient in cross-linking. The composition of the layer is shown to depend on the degree of hydrophobicity of the mold surface and is weaker for more hydrophobic molds. While the macroscopic tests proved the existence of a relatively thick under-cross-linked layer, we also demonstrated by neutron reflectivity that the gel surface at the submicrometric scale (500 nm) was also affected by the surface treatment of the mold. These results should have important implications for the measurement of macroscopic surface properties of these hydrogels such as friction or adhesion.