Soft Fiber Electronics Based on Semiconducting Polymer

Fibers, originating from nature and mastered by human, have woven their way throughout the entire history of human civilization. Recent developments in semiconducting polymer materials have further endowed fibers and textiles with various electronic functions, which are attractive in applications such as information interfacing, personalized medicine, and clean energy. Owing to their ability to be easily integrated into daily life, soft fiber electronics based on semiconducting polymers have gained popularity recently for wearable and implantable applications. Herein, we present a review of the previous and current progress in semiconducting polymer-based fiber electronics, particularly focusing on smart-wearable and implantable areas. First, we provide a brief overview of semiconducting polymers from the viewpoint of materials based on the basic concepts and functionality requirements of different devices. Then we analyze the existing applications and associated devices such as information interfaces, healthcare and medicine, and energy conversion and storage. The working principle and performance of semiconducting polymer-based fiber devices are summarized. Furthermore, we focus on the fabrication techniques of fiber devices. Based on the continuous fabrication of one-dimensional fiber and yarn, we introduce two- and three-dimensional fabric fabricating methods. Finally, we review challenges and relevant perspectives and potential solutions to address the related problems.

Recent Progress in Electrospun Polyacrylonitrile Nanofiber-Based Wound Dressing

Bleeding control plays a very important role in worldwide healthcare, which also promotes research and development of wound dressings. The wound healing process involves four stages of hemostasis, inflammation, proliferation and remodeling, which is a complex process, and wound dressings play a huge role in it. Electrospinning technology is simple to operate. Electrospun nanofibers have a high specific surface area, high porosity, high oxygen permeability, and excellent mechanical properties, which show great utilization value in the manufacture of wound dressings. As one of the most popular reactive and functional synthetic polymers, polyacrylonitrile (PAN) is frequently explored to create nanofibers for a wide variety of applications. In recent years, researchers have invested in the application of PAN nanofibers in wound dressings. Research on spun nanofibers is reviewed, and future development directions and prospects of electrospun PAN nanofibers for wound dressings are proposed.

Electrospun Nanofibers for Integrated Sensing, Storage, and Computing Applications

Electrospun nanofibers have become the most promising building blocks for future high-performance electronic devices because of the advantages of larger specific surface area, higher porosity, more flexibility, and stronger mechanical strength over conventional film-based materials. Moreover, along with the properties of ease of fabrication and cost-effectiveness, a broad range of applications based on nanomaterials by electrospinning have sprung up. In this review, we aim to summarize basic principles, influence factors, and advanced methods of electrospinning to produce hundreds of nanofibers with different structures and arrangements. In addition, electrospun nanofiber based electronics composed of both two-terminal and three-terminal devices and their practical applications are discussed in the fields of sensing, storage, and computing, which give rise to the further integration to realize a comprehensive and brain-like system. Last but not least, the emulation of biological synapses through artificial synaptic transistors and additionally optoelectronics in recent years are included as an important step toward the construction of large-scale, multifunctional systems.

Functionalized single-walled carbon-nanotube-blended P3HT-based high performance memory behavior thin-film transistor devices

We report on the fabrication and transport properties of single-walled carbon nanotubes (SWCNT) blended with P3HT (poly 3-hexyl thiophene-2, 5-diyl). The composite is used as a hybrid organic active channel transistor. The performances of the fabricated devices were investigated as a function of the SWCNTs' loads in the composite, and their response evaluated under white light illumination. Our results show that for SWCNT loads ≤1.5 wt%, all the devices behave as p-type transistors, exhibiting excellent performance, with an I _on /I _off ratio of 10⁴ and a maximum on-state current (I _on) exceeding 80 μA. Moreover, compared with pristine transistors with a P3HT channel, the Hall mobility of these hybrid TFTs was found to increase by more than one order of magnitude, i.e. increasing from 0.062 to 1.54 cm² V^-1 s^-1. Finally, under light illumination, the transfer characteristics (i.e. I _DS as a function of V _GS) were found to systematically undergo a typical shift together with a fully-reversible memory behavior. A fundamental understanding of this work can assist in providing new routes for the development of reliable efficient hybrid organic-based optoelectronic devices.

Deformable Organic Nanowire Field-Effect Transistors

Deformable electronic devices that are impervious to mechanical influence when mounted on surfaces of dynamically changing soft matters have great potential for next-generation implantable bioelectronic devices. Here, deformable field-effect transistors (FETs) composed of single organic nanowires (NWs) as the semiconductor are presented. The NWs are composed of fused thiophene diketopyrrolopyrrole based polymer semiconductor and high-molecular-weight polyethylene oxide as both the molecular binder and deformability enhancer. The obtained transistors show high field-effect mobility >8 cm² V^-1 s^-1 with poly(vinylidenefluoride-co-trifluoroethylene) polymer dielectric and can easily be deformed by applied strains (both 100% tensile and compressive strains). The electrical reliability and mechanical durability of the NWs can be significantly enhanced by forming serpentine-like structures of the NWs. Remarkably, the fully deformable NW FETs withstand 3D volume changes (>1700% and reverting back to original state) of a rubber balloon with constant current output, on the surface of which it is attached. The deformable transistors can robustly operate without noticeable degradation on a mechanically dynamic soft matter surface, e.g., a pulsating balloon (pulse rate: 40 min^-1 (0.67 Hz) and 40% volume expansion) that mimics a beating heart, which underscores its potential for future biomedical applications.

Crystallization of Poly(3-hexylthiophene) Nanofiber in a Narrow Groove

Whisker-type poly(3-hexylthiophene-2,5-diyl) (P3HT) nanofibers were aligned by restricting their growth direction using an approximately 100⁻1000 nm wide narrow groove fabricated by thermal nanoimprinting. In grooves made of an amorphous fluoropolymer (CYTOP™) with widths of less than 1500 nm, the nanofibers oriented uniaxially perpendicular to the groove and their length was limited to the width of the groove. This result indicates that the nucleation of nanofibers tends to be selectively promoted near the interface of CYTOP™ with fluoro-groups, and nanofiber growth perpendicular to the wall is promoted because P3HT molecules are supplied more frequently from the center of the groove. Furthermore, the orientation induced anisotropic conductivity, and the conductivity parallel to the oriented nanofibers was more than an order of magnitude higher than that perpendicular to the oriented nanofibers.

Tunable Percolation in Semiconducting Binary Polymer Nanoparticle Glasses

Binary polymer nanoparticle glasses provide opportunities to realize the facile assembly of disparate components, with control over nanoscale and mesoscale domains, for the development of functional materials. This work demonstrates that tunable electrical percolation can be achieved through semiconducting/insulating polymer nanoparticle glasses by varying the relative percentages of equal-sized nanoparticle constituents of the binary assembly. Using time-of-flight charge carrier mobility measurements and conducting atomic force microscopy, we show that these systems exhibit power law scaling percolation behavior with percolation thresholds of ∼24-30%. We develop a simple resistor network model, which can reproduce the experimental data, and can be used to predict percolation trends in binary polymer nanoparticle glasses. Finally, we analyze the cluster statistics of simulated binary nanoparticle glasses, and characterize them according to their predominant local motifs as (p(i), p(1-i))-connected networks that can be used as a supramolecular toolbox for rational material design based on polymer nanoparticles.

Work Function Modification in P3HT H/J Aggregate Nanostructures Revealed by Kelvin Probe Force Microscopy and Photoluminescence Imaging

We show that surface electronic properties of poly-3-hexylthiophene (P3HT) crystalline nanofibers as probed by Kelvin probe force microscopy (KPFM) depends sensitively on the degree of polymer packing order and dominant coupling type (e.g., H- or J-aggregate) as signaled by absorption or photoluminescence spectroscopy. Nominal HOMO energies between high molecular weight (J-aggregate) nanofibers and low-molecular weight (H-aggregate) nanofibers differ by ≈160 meV. This is consistent with shifts expected from H-type charge-transfer (CT) interactions that lower HOMO energies according to registration between thiophene moieties on adjacent polymer chains. These results show how KPFM combined with wavelength-resolved photoluminescence imaging can be used to extract information on "dark" (CT) interactions in polymer assemblies.

Electrospun Polymer Fibers for Electronic Applications

Nano- and micro- fibers of conjugated polymer semiconductors are particularly interesting both for applications and for fundamental research. They allow an investigation into how electronic properties are influenced by size confinement and chain orientation within microstructures that are not readily accessible within thin films. Moreover, they open the way to many applications in organic electronics, optoelectronics and sensing. Electro-spinning, the technique subject of this review, is a simple method to effectively form and control conjugated polymer fibers. We provide the basics of the technique and its recent advancements for the formation of highly conducting and high mobility polymer fibers towards their adoption in electronic applications.

Cross-linked functionalized poly(3-hexylthiophene) nanofibers with tunable excitonic coupling

We show that mechanically and chemically robust functionalized poly(3-hexylthiophene) (P3HT) nanofibers can be made via chemical cross-linking. Dramatically different photophysical properties are observed depending on the choice of functionalizing moiety and cross-linking strategy. Starting with two different nanofiber families formed from (a) P3HT-b-P3MT or (b) P3HT-b-P3ST diblock copolymers, cross-linking to form robust nanowire structures was readily achieved by either a third-party cross-linking agent (hexamethylene diisocyanate, HDI) which links methoxy side chains on the P3MT system, or direct disulfide cross-link for the P3ST system. Although the nanofiber families have similar gross structure (and almost identical pre-cross-linked absorption spectra), they have completely different photophysics as signaled by ensemble and single nanofiber wavelength- and time-resolved photoluminescence as well as transient absorption (visible and near-IR) probes. For the P3ST diblock nanofibers, excitonic coupling appears to be essentially unchanged before and after cross-linking. In contrast, cross-linked P3MT nanofibers show photoluminescence similar in electronic origin, vibronic structure, and lifetime to unaggregated P3HT molecules, e.g., dissolved in an inert polymer matrix, suggesting almost complete extinction of excitonic coupling. We hypothesize that the different photophysical properties can be understood from structural perturbations resulting from the cross-linking: For the P3MT system, the DIC linker induces a high degree of strain on the P3HT aggregate block, thus disrupting both intra- and interchain coupling. For the P3ST system, the spatial extent of the cross-linking is approximately commensurate with the interlamellar spacing, resulting in a minimally perturbed aggregate structure.

Thermal annealing effect on poly(3-hexylthiophene): fullerene:copper-phthalocyanine ternary photoactive layer

We have fabricated poly(3-hexylthiophene) (P3HT)/copper phthalocyanine (CuPc)/fullerene (C60) ternary blend films. This photoactive layer is sandwiched between an indium tin oxide (ITO)/poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT/PSS) photoanode and a bathocuproine (BCP)/aluminium photocathode. The thin films have been characterized by atomic force microscope (AFM) and ultraviolet/visible spectroscopy in order to study the influence of P3HT doping on the morphological and optical properties of the photoactive layer. We have also compared the I-V characteristics of three different organic solar cells: ITO/PEDOT:PSS/CuPc_0.5:C60_0.5/BCP/Al and ITO/PEDOT:PSS/P3HT_0.3:CuPc_0.3:C60_0.4/BCP/Al with and without annealing. Both structures show good photovoltaic behaviour. Indeed, the incorporation of P3HT into CuPc:C60 thin film improves all the photovoltaic characteristics. We have also seen that thermal annealing significantly improves the optical absorption ability and stabilizes the organic solar cells making it more robust to chemical degradation.