Synthesis, Characterization, and Properties of Poly(aryl)phosphinoboranes Formed via Iron-Catalyzed Dehydropolymerization

Dehydropolymerization of Amine-Boranes using Bis(imino)pyridine Rhodium Pre-Catalysis: σ-Amine-Borane Complexes, Nanoparticles, and Low Residual-Metal BN-Polymers that can be Chemically Repurposed

The sigma amine-borane complexes [Rh(L1)(η2 :η2 -H3 B⋅NRH2 )][OTf] (L1=2,6-bis-[1-(2,6-diisopropylphenylimino)ethyl]pyridine, R=Me, Et, n Pr) are described, alongside [Rh(L1)(NMeH2 )][OTf]. Using R=Me as a pre-catalyst (1 mol %) the dehydropolymerization of H3 B ⋅ NMeH2 gives [H2 BNMeH]n selectively. Added NMeH2 , or the direct use of [Rh(L1)(NMeH2 )][OTf], is required for initiation of catalysis, which is suggested to operate through the formation of a neutral hydride complex, Rh(L1)H. The formation of small (1-5 nm) nanoparticles is observed at the end of catalysis, but studies are ambiguous as to whether the catalysis is solely nanoparticle promoted or if there is a molecular homogeneous component. [Rh(L1)(NMeH2 )][OTf] is shown to operate at 0.025 mol % loadings on a 2 g scale of H3 B ⋅ NMeH2 to give polyaminoborane [H2 BNMeH]n [Mn =30,900 g/mol, Ð=1.8] that can be purified to a low residual [Rh] (6 μg/g). Addition of Na[N(SiMe3 )2 ] to [H2 BNMeH]n results in selective depolymerization to form the eee-isomer of N,N,N-trimethylcyclotriborazane [H2 BNMeH]3 : the chemical repurposing of a main-group polymer.

Three- and Five-Membered Anionic Chains of Pnictogenylboranes

An unprecedented family of three- and five-membered substituted anionic derivatives of parent pnictogenylboranes is herein reported. Reacting various combinations of the pnictogenylboranes H₂ E'-BH₂ -NMe₃ (E'=P, As) with pnictogen-based nucleophiles MER1R2 (E=P, As; R1=H, R2=^t Bu; R1=R2=Ph; M=Na, K) allows for the isolation of the unsymmetrical products [Na(18-crown-6)][H₂ E'-BH₂ -EH^t Bu] (3: E=E'=P; 4: E=E'=As; 5: E=As, E'=P) and [M(C)][H₂ E'-BH₂ -EPh₂ ] (7: E=E'=P, M=Na, C=18-crown-6; 8: E=E'=As; M=K, C=[2.2.2]cryptand; 9: E=P, E'=As, M=Na, C=[2.2.2]cryptand; 10: E=As, E'=P, M=K, C=[2.2.2]cryptand). [Na(18-crown-6)][H₂ As-BH₂ -^t BuPH-BH₃ ] (6) is only accessible by a different pathway, using ^t BuPH₂ , BH₃  ⋅ SMe₂ and NaNH₂ as starting materials. Additionally, the synthesis of symmetrical diphenyl-substituted compounds [M(18-crown-6)][Ph₂ E-BH₂ -EPh₂ ] (11: E=P, M=Na; 12: E=As, M=K) is reported which can be regarded as isostructural inorganic, negatively charged analogs of dppm (1,1-bis(diphenylphosphino)methane) and dpam (1,1-bis(diphenylarsino)methane). Furthermore, an elongation of the pnictogen boron backbone in compounds 3, 7 and 9' (similar compound to 9, stabilized however by 18-crown-6), is attainable by reacting them with the pnictogenylboranes H₂ E'-BH₂ -NMe₃ leading to corresponding five-membered chain-like compounds [Na(18-crown-6)][H₂ E-BH₂ -R1R2P-BH₂ -E'H₂ ] (E=E'=P, R1=H, R2=^t Bu (13); E=E'=P, R1=R2=Ph (14); E=E'=As, R1=R2=Ph (15); E=P, E'=As, R1=R2=Ph (16)). Finally, the thermodynamics of the reaction pathways were evaluated by quantum chemical computations.

Polyphosphinoborane Block Copolymer Synthesis Using Catalytic Reversible Chain-Transfer Dehydropolymerization

An amphiphilic block copolymer of polyphosphinoborane has been prepared by a mechanism-led strategy of the sequential catalytic dehydropolymerization of precursor monomers, H₃ B ⋅ PRH₂ (R=Ph, n-hexyl), using the simple pre-catalyst [Rh(Ph₂ PCH₂ CH₂ PPh₂ )₂ ]Cl. Speciation, mechanism and polymer chain growth studies support a step-growth process where reversible chain transfer occurs, i.e. H₃ B ⋅ PRH₂ /oligomer/polymer can all coordinate with, and be activated by, the catalyst. Block copolymer [H₂ BPPhH]₁₁₀ -b-[H₂ BP(n-hexyl)H]₁₁ can be synthesized and self-assembles in solution to form either rod-like micelles or vesicles depending on solvent polarity.

Transition-Metal-Free Dehydropolymerization of Phosphine-Boranes at Ambient Temperature

Stoichiometric reaction of phosphine-borane adducts RR'PH⋅BH₃ (R=Ph, R'=H, Ph, Et, and R=R'=^t Bu) with the strong acid HNTf₂ (Tf=SO₂ CF₃ ) leads to H₂ elimination and the formation of the triflimido derivatives, RR'PH⋅BH₂ (NTf₂ ). Subsequent deprotonation by using bases, such as diisopropylethylamine or the carbene IPr (IPr=N,N'-bis(2,6-diisopropylphenyl)imidazol-2-ylidene), led to the formation of P-mono- or -disubstituted polyphosphinoboranes [RR'P-BH₂ ]_n . Evidence for the intermediacy of transient phosphinoborane monomers, RR'PBH₂ , was provided by trapping reactions.

Calix[4]pyrrolato Aluminate Catalyzes the Dehydrocoupling of Phenylphosphine Borane to High Molar Weight Polymers

High molar weight polyphosphinoboranes represent materials with auspicious properties, but their preparation requires transition metal‐based catalysts. Here, calix[4]pyrrolato aluminate is shown to induce the dehydropolymerization of phosphine boranes to high molar mass polyphosphinoboranes (up to M_n=43 000 Da). Combined GPC and ³¹P DOSY NMR spectroscopic analyses, quantum chemical computations, and stoichiometric reactions disclose a P−H bond activation by the cooperative action of the square‐planar aluminate and the electron‐rich ligand framework. This first transition metal‐free catalyst for P−B dehydrocoupling overcomes the problem of residual d‐block metal impurities in the resulting polymers that might interfere with the reproducibility of the properties for this emerging class of inorganic materials.

Dehydropolymerisation of methylamine borane using highly active rhodium(iii) bis(thiophosphinite) pincer complexes: catalytic and mechanistic insights

The bis(thiophosphinite) pincer complexes [(^RPSCSP^R)Rh(py)(H)(Cl)] (^RPSCSP^R = C₆H₄–2,6-(SPR₂)₂ with R = ⁱPr, 2a and R = Ph, 2b) are highly active precatalysts for the dehydropolymerisation of methylamine borane.

Phosphinoborane interception at magnesium by borane-assisted phosphine-borane dehydrogenation

Ph₂PBH₂ is generated and trapped on-metal by addition of B(C₆F₅)₃ to a β-diketiminato magnesium phospidoborane complex, similar reactivity is meanwhile prevented for the analogous calcium-based system by formation of a stable η⁶-toluene complex.

Synthesis and Post-Polymerization Functionalization of Halogen-Substituted Polyphosphinoboranes to Access Alkyne-Functionalized Derivatives

Catalytic dehydropolymerization of halogen-functionalized phosphine-boranes (4-X-C₆ H₄ )PH₂ ⋅BH₃ (1a: X = Br, 1b: X = I) with [CpFe(CO)₂ (OTf)] at 100 °C provides convenient access to halogen-functionalized polyphosphinoboranes [(4-X-C₆ H₄ )PH-BH₂ ]_n (2a: X = Br, 2b: X = I). These polymers are useful precursors for post-polymerization functionalization, which is demonstrated by Sonogashira coupling under mild conditions to yield the alkynyl-functionalized polyphosphinoborane [(4-PhCC-C₆ H₄ )PH-BH₂ ]_n (3).

Photolytic, radical-mediated hydrophosphination: a convenient post-polymerisation modification route to P-di(organosubstituted) polyphosphinoboranes [RR'PBH2] n

Polymers with a phosphorus-boron main chain have attracted interest as novel inorganic materials with potentially useful properties since the 1950s. Although examples have recently been shown to be accessible via several routes, the materials reported so far have been limited to P-mono(organosubstituted) materials, [RHPBH2] n , containing P-H groups. Here we report a general route for the post-polymerisation modification of such polyphosphinoboranes giving access to a large range of previously unknown examples featuring P-disubstituted units. Insertion of alkenes, R'CH[double bond, length as m-dash]CH2 into the P-H bonds of poly(phenylphosphinoborane), [PhHPBH2] n was facilitated by irradiation under UV light in the presence of the photoinitiator 2,2-dimethoxy-2-phenylacetophenone (DMPAP) and (2,2,6,6-tetramethylpiperidin-1-yl)oxyl (TEMPO) under benchtop conditions giving high molar mass, air-stable polymers [PhR'PBH2] n with controlled functionalisation and tunable material properties. The mechanistic explanation for the favourable effect of the addition of TEMPO was also investigated and was proposed to be a consequence of reversible binding to radical species formed from the photolysis of DMPAP. This new methodology was also extended to the formation of crosslinked gels and to water-soluble bottlebrush copolymers showcasing applicability to form a wide range of polyphosphinoborane-based soft materials with tunable properties.

Amine-Borane Dehydropolymerization: Challenges and Opportunities

The dehydropolymerization of amine-boranes, exemplified as H2 RB⋅NR'H2 , to produce polyaminoboranes (HRBNR'H)n that are inorganic analogues of polyolefins with alternating main-chain B-N units, is an area with significant potential, stemming from both fundamental (mechanism, catalyst development, main-group hetero-cross-coupling) and technological (new polymeric materials) opportunities. This Concept article outlines recent advances in the field, covering catalyst development and performance, current mechanistic models, and alternative non-catalytic routes for polymer production. The substrate scope, polymer properties and applications of these exciting materials are also outlined. Challenges and opportunities in the field are suggested, as a way of providing focus for future investigations.

Boron–nitrogen main chain analogues of polystyrene: poly(B-aryl)aminoboranes via catalytic dehydrocoupling

High molecular weight B-arylated polyaminoboranes are obtained via catalytic dehydropolymerisation of B-aryl amine–boranes and represent the first inorganic polystyrene analogues with a B–N main chain.