Three/Four-Dimensional Printed PLA Nano/Microstructures: Crystallization Principles and Practical Applications

Compared to traditional methods, three/four-dimensional (3D/4D) printing technologies allow rapid prototyping and mass customization, which are ideal for preparing nano/microstructures of soft polymer materials. Poly (lactic acid) (PLA) is a biopolymer material widely used in additive manufacturing (AM) because of its biocompatibility and biodegradability. Unfortunately, owing to its intrinsically poor nucleation ability, a PLA product is usually in an amorphous state after industrial processing, leading to some undesirable properties such as a barrier property and low thermal resistance. Crystallization mediation offers a most practical way to improve the properties of PLA products. Herein, we summarize and discuss 3D/4D printing technologies in the processing of PLA nano/microstructures, focusing on crystallization principles and practical applications including bio-inspired structures, flexible electronics and biomedical engineering mainly reported in the last five years. Moreover, the challenges and prospects of 3D/4D printing technologies in the fabrication of high-performance PLA materials nano/microstructures will also be discussed.

Convergence of 3D Bioprinting and Nanotechnology in Tissue Engineering Scaffolds

Three-dimensional (3D) bioprinting has emerged as a promising scaffold fabrication strategy for tissue engineering with excellent control over scaffold geometry and microstructure. Nanobiomaterials as bioinks play a key role in manipulating the cellular microenvironment to alter its growth and development. This review first introduces the commonly used nanomaterials in tissue engineering scaffolds, including natural polymers, synthetic polymers, and polymer derivatives, and reveals the improvement of nanomaterials on scaffold performance. Second, the 3D bioprinting technologies of inkjet-based bioprinting, extrusion-based bioprinting, laser-assisted bioprinting, and stereolithography bioprinting are comprehensively itemized, and the advantages and underlying mechanisms are revealed. Then the convergence of 3D bioprinting and nanotechnology applications in tissue engineering scaffolds, such as bone, nerve, blood vessel, tendon, and internal organs, are discussed. Finally, the challenges and perspectives of convergence of 3D bioprinting and nanotechnology are proposed. This review will provide scientific guidance to develop 3D bioprinting tissue engineering scaffolds by nanotechnology.

Wetting of Superhydrophobic Polylactic Acid Micropillared Patterns

Superhydrophobic (SH) polylactic acid (PLA) surfaces were previously produced by various methods and used especially in biomedical applications and oil/water separation processes after 2008. However, the wettability of SH-PLA patterns containing micropillars has not been investigated before. In this study, PLA patterns having regular microstructured pillars with 12 different pillar diameters and pillar-to-pillar distances were prepared by hot pressing pre-flattened PLA sheets onto preformed polydimethylsiloxane (PDMS) soft molds having micro-sized pits. PDMS templates were previously prepared by photolithography using SU-8 molds. Apparent, advancing, and receding water contact angle measurements were carried out on the PLA patterns containing micropillars, and the morphology of the patterns was examined by optical and SEM microscopy. The largest contact angle obtained without the surface modification of the pure PLA pattern was 139°. Then, PLA micropatterns were hydrophobized using three types of silanes via chemical vapor deposition method, and SH-PLA patterns were obtained having θs of up to 167°. It was found that the highest θ values could be obtained when PLA pattern samples were coated with a silane containing a fluorine atom in its chemical structure. Washing and service life stability tests were also performed on the coated pattern samples and all of the silane coatings on the PLA patterns were found to be resistant over a 6 month period.

Synergistic Poly(lactic acid) Antibacterial Surface Combining Superhydrophobicity for Antiadhesion and Chlorophyll for Photodynamic Therapy

The problem of nosocomial infections caused by bacterial growth on material surfaces is an urgent threat to public health. Although numerous materials and methods have been explored to fight against infections, the methods are complicated and the materials are slightly toxic. It is highly desirable to develop an antibacterial strategy that kills bacteria effectively without drug resistance and cytotoxicity. Herein, we present a synergistic antibacterial polylactic acid (PLA) surface with superhydrophobic antibacterial adhesion and photodynamic bactericidal activity. Initially, the surface displayed low-adhesion superhydrophobicity and resisted most bacterial adhesion. Furthermore, completely non-toxic chlorophyll possessed excellent photodynamic bactericidal properties under non-toxic visible light, which was incorporated into micro-/nanoscale PLA surfaces. We achieved efficient antibacterial activity using completely non-toxic materials and a facile non-solvent-induced phase separation process. This non-toxic, simple, good biocompatible, and no drug-resistant strategy has great advantages in combating bacterial infections.