Synthesis and Self-Assembly of pH-Responsive Amphiphilic Poly(dimethylaminoethyl methacrylate)-block-Poly(pentafluorostyrene) Block Copolymer in Aqueous Solution

Smart Starch-Poly( N-isopropylacrylamide) Hybrid Microgels: Synthesis, Structure, and Swelling Behavior

In this study, we present hybrid microgels made of starch nanoparticles (SNPs) and poly( N-isopropylacrylamide) [p(NIPAM)]. SNPs were formed through nanoprecipitation. Hybrid microgels were prepared by surfactant-free precipitation polymerization (SFPP) or in the presence of surfactant precipitation polymerization (PP) at different NIPAM/SNP ratios. Dynamic light scattering results of hybrid microgels synthesized by SFPP revealed changes in volume phase transition temperature according to SNP amount, where the increase in the hydrophilic content caused small shifts in the lower critical solution temperature (LCST), reaching nearly 35 °C. Colloidal stability was improved with the SNP content, leading to increased stability because of the hydroxyl groups. Small-angle X-ray scattering indicates a core-shell structure above the LCST, where SNPs chains cover a p(NIPAM) core. Swelling curves experimentally obtained were analyzed using the Flory-Rehner model, where the interaction parameter (χ) has been modeled either by a series expansion of the swelling ratio or by a Hill-like equation for a cooperative thermotropic transition.

Surface Modification of Polydivinylbenzene Microspheres with a Fluorinated Glycopolymer Using Thiol-Halogen Click Chemistry

Distillation-precipitation polymerization of divinylbenzene was applied to obtain uniform-sized polymeric microspheres. The microspheres were then modified with polypentafluorostyrene chains utilizing surface-initiated atom transfer radical polymerization techniques. The hydrophobic fluoropolymer-coated microsphere was then converted to a hydrophilic biopolymer by performing thiol-halogen click chemistry between polypentafluorostyrene and 1-thio-β-D-glucose sodium salt. The semi-fluorinated glycopolymer showed good binding ability with Concanavalin A as determined by confocal microscopy and turbidity experiments.

Reproducible Access to Tunable Morphologies via the Self-Assembly of an Amphiphilic Diblock Copolymer in Water

We report on the preparation of positively charged crew-cut nanoaggregates in water with various nonspherical (i.e., worm, flower, and large compound) and spherical (i.e., vesicle and sphere) morphologies by the self-assembly of a single diblock copolymer in water. Our facile procedure for preparing positively charged nanoparticles, when combined with the techniques for obtaining negatively charged and neutral nanoaggregates already established by Eisenberg et al., provides a versatile toolbox for the reproducible production of uniformly nanostructured particles with control over both morphology and surface chemistry. Such nanoparticles offer opportunities for the fundamental study of nanobio interactions and may open the door to novel drug and gene delivery applications.

Synthesis of a cationic fluorinated polyacrylate emulsifier-free emulsion via ab initio RAFT emulsion polymerization and its hydrophobic properties of coating films

Cationic fluorinated polyacrylate emulsifier-free emulsion was synthesized by RAFT emulsifier-free emulsion polymerization.

Fluorinated amphiphilic block copolymers via RAFT polymerization and their application as surf-RAFT agent in miniemulsion polymerization

Preparation of an amphiphilic block copolymer (Am-BCP) based on poly(ethylene glycol) methyl ether methacrylate (PEGMA) and heptafluorobutyl acrylate (HFBA) via RAFT polymerization and application of this Am-BCP as surf-RAFT agent for polymerization of styrene.

"On-off-on" switchable sensor: a fluorescent spiropyran responds to extreme pH conditions and its bioimaging applications

A novel spiropyran that responds to both extreme acid and extreme alkali and has an "on-off-on" switch is reported. Benzoic acid at the indole N-position and carboxyl group at the indole 6-position contribute to the extreme acid response. The ionizations of carboxyl and phenolic hydroxyl groups cause the extreme alkali response. Moreover, the fluorescent imaging in bacterial cells under extreme pH conditions supports the mechanism of pH response.

Hierarchical self-assembly of polyhedral oligomeric silsesquioxane end-capped stimuli-responsive polymer: from single micelle to complex micelle

Responsive polymeric micelles have been widely studied because of their potential use in nanocontainers and nanocarriers. In this study, polyhedral oligomeric silsesquioxane (POSS) end-capped poly[2-(dimethylamino)ethyl methacrylate] (POSS-PDMAEMA), a stimuli-responsive organic-inorganic hybrid polymer, was synthesized via atom transfer radical polymerization (ATRP) using POSS-Br as a macroinitiator. The self-assembly behaviors of POSS-PDMAEMA in aqueous solution were studied by fluorescence probe, transmission electron microscopy (TEM), dynamic light scattering (DLS), high-resolution transmission electron microscopy (HRTEM), and X-ray diffraction (XRD). The results revealed two self-assembly processes of POSS-PDMAEMA. First they self-assembled into a single micelle with the POSS molecules forming a crystal core and the PDMAEMA chains stretching as a corona. Then the single micelles, as building blocks, were able to reversibly form a hierarchical micelle-on-micelle structure (complex micelle) under external stimuli.

Calcium phosphate growth beneath a polycationic monolayer at the air-water interface: effects of oscillating surface pressure on mineralization

The self-assembly of the amphiphilic block copolymer poly(butadiene)-block-poly[2-(dimethylamino)ethyl methacrylate] at the air-water interface and the mineralization of the monolayers with calcium phosphate was investigated at different pH values. As expected for polyelectrolytes, the subphase pH strongly affects the monolayer properties. The focus of the current study, however, is on the effect of an oscillating (instead of a static) polymer monolayer on calcium phosphate mineralization. Monitoring of the surface pressure vs. mineralization time shows that the monolayer is quite stable if the mineralization is performed at pH 8. In contrast, the monolayer at pH 5 shows a measurable decrease of the surface pressure already after ca. 2 h of mineralization. Transmission electron microscopy reveals that mineralization at low pH under constant oscillation leads to small particles, which are arranged in circular features and larger entities with holes of ca. 200 nm. The larger features with the holes disappear as the mineralization is continued in favor of the smaller particles. These grow with time and form necklace-like architectures of spherical particles with a uniform diameter. In contrast, mineralization at pH 8 leads to very uniform particle morphologies already after 2 h. The mineralization products consist of a circular feature with a dark dot in the center. The increasing contrast of the precipitates in the electron micrographs with mineralization time indicates an increasing degree of mineralization vs. reaction time. The study therefore shows that mechanical effects on mineralization at interfaces are quite complex.

Micelle formation and gelation of (PEG-P(MA-POSS)) amphiphilic block copolymers via associative hydrophobic effects

A series of well-defined amphiphilic di- and triblock copolymers have been synthesized, using atom transfer radical polymerization, with poly(ethylene glycol) (PEG) and poly(methacrylisobutyl polyhedral oligomeric silsesquioxane) P(MA-POSS) as the hydrophilic and hydrophobic blocks, respectively. The detailed self-assembly behavior of the amphiphilic macromolecules in aqueous media was studied using both static and dynamic light scattering (SLS and DLS) techniques. The evolution of block copolymer micelle formation in THF/water mixture (20/80 v/v) was monitored as the THF evaporated from the solvent mixture. Initially the block copolymer chains existed as unimers in solution, followed by the formation of smaller aggregates (R(h) < 2 nm) after 30 min, eventually growing in size to reach an equilibrium size when all the THF evaporated within 24 h. The micelles formed by the block copolymers were found to be kinetically unstable (not frozen); i.e., they tended to revert to individual copolymer chains on dilution. The hydrodynamic radii, R(h), of the micelles varied with the degree of polymerization (DP) of the hydrophobic P(MA-POSS); for example, for PEG(5K)-b-P(MA-POSS), an increase from R(h) approximately 13.3 +/- 1.1 nm to R(h) approximately 17.5 +/- 1.4 nm was observed with a nominal change in the DP of P(MA-POSS) from 4 to 6. The micelles formed by the triblock copolymers (P(MA-POSS)-b-PEG(10K)-b-P(MA-POSS)) were comparable in size to the diblock copolymer micelles; e.g., R(h) approximately 14.0 +/- 1.3 nm was found for P(MA-POSS)(4)-b-PEG(10K)-b-P(MA-POSS)(4). The micellar structures created by the triblocks in aqueous media were "flowerlike", where the PEG middle block adopted a loop conformation in the micelle corona. In addition to micelles, larger aggregates formed by P(MA-POSS)-b-PEG(10K)-b-P(MA-POSS) were also detected in solution. The larger aggregates may suggest a contribution from some PEG blocks adopting an extended conformation with one end dangling in solution, causing gelation at higher copolymer concentrations via intermicellar interactions. The P(MA-POSS)(4)-b-PEG(10K)-b- P(MA-POSS)(4) formed a gel in water at approximately 8.8 wt % copolymer concentration. No gel formation by diblock copolymers was observed; however, the addition of a small amount of triblock copolymer to an aqueous solution of diblock copolymer results in gel formation. Finally, rheological behavior of the obtained gels was also investigated.