Alternating Terpolymers through Cyclopolymerization and Subsequent Orthogonal Functionalization

A method for the synthesis of functionalized alternating copolymers by reversible deactivation radical polymerization was developed. Copolymerization by reversible addition-fragmentation chain transfer of hexenyl vinyl ether with a novel fluorinated divinyl monomer yields alternating cyclopolymers that can be chemoselectively modified by three distinct orthogonal functionalization reactions. Along the thiol-ene click reaction and amidation, a third functionalization was achieved via NHC-catalyzed transesterification or acylation resulting in a small library of ABC-type alternating terpolymers.

Unprecedented Sequence Control and Sequence-Driven Properties in a Series of AB-Alternating Copolymers Consisting Solely of Acrylamide Units

Herein, we report a method to synthesize a series of alternating copolymers that consist exclusively of acrylamide units. Crucial to realizing this polymer synthesis is the design of a divinyl monomer that contains acrylate and acrylamide moieties connected by two activated ester bonds. This design, which is based on the reactivity ratio of the embedded vinyl groups, allows a "selective" cyclopolymerization, wherein the intramolecular and intermolecular propagation are repeated alternately under dilute conditions. The addition of an amine to the resulting cyclopolymers afforded two different acryl amide units, i.e., an amine-substituted acryl amide and a 2-hydroxy-ethyl-substituted acryl amide in alternating sequence. Using this method, we could furnish ten types of alternating copolymers; some of these exhibit unique properties in solution and in the bulk, which are different from those of the corresponding random copolymers, and we attributed the differences to the alternating sequence.

Saccharin-pendant methacrylamide as a unique monomer in radical copolymerization: peculiar alternating copolymerization with styrene

A saccharin metharylamide was found to uniquely induce alternating copolymerization with styrene.

Controlled Radical Polymerization of Ethylene Using Organotellurium Compounds

The first successfully controlled radical polymerization (CRP) of ethylene is reported using several organotellurium chain-transfer agents (CTAs) under mild conditions (70 °C, 200 bar of ethylene) within the concept of organotellurium-mediated radical polymerization (TERP). In contrast to preceding works on CRPs of ethylene applying reversible addition-fragmentation chain-transfer (RAFT), the TERP system provided a high livingness and chain-end functionalization of polyethylene chains. Molar-mass distributions with dispersities between 1.3 and 2.1 were obtained up to average molar masses of 5000 g mol^-1 . As in the RAFT system, the high reactivity of the growing polyethylenyl radical led to an inherent side reaction. For the presented TERP systems, however, this side reaction did not result in dead chains, while it could even be effectively suppressed by a good choice of the CTA.

One-shot controlled/living copolymerization for various comonomer sequence distributions via dual radical and cationic active species from RAFT terminals

One-shot control of comonomer sequence distributions was demonstrated by dual radical and cationic copolymerization using RAFT mediator.

Nitroxide-Mediated Alternating Copolymerization of Vinyl Acetate with tert-Butyl-2-trifluoromethacrylate Using a SG1-Based Alkoxyamine

Unique alternating copolymers based on vinyl acetate (VAc) and tert-butyl-2-trifluoromethacrylate (MAF-TBE, a nonhomopolymerizable monomer under radical conditions) have been synthesized by nitroxide-mediated polymerization (NMP) using a SG1-based BlocBuilder alkoxyamine (MAMA-SG1) at moderate temperature (at 40 °C) in dimethyl sulfoxide. First-order kinetics and linear evolutions of the molecular weight (up to 17100 g mol^-1), maintaining low dispersity values (Đ ≤ 1.33), confirmed the controlled nature of the copolymerization. Interestingly, none of the starting monomers could undergo homopolymerization under the NMP condition initiated by MAMA-SG1. The resulting alternating copolymers were characterized by ¹H, ¹³C, ¹⁹F, and ³¹P NMR spectroscopies and size exclusion chromatography (SEC). The poly(VAc-alt-MAF-TBE) copolymer is amorphous and exhibited a single glass transition temperature of 59 °C. This is the first report of nitroxide-mediated (co)polymerization of VAc leading to well-defined copolymers with satisfactory yields. The results presented in this study established a new route via NMP toward the synthesis of strictly 1:1 alternating fluorocopolymers that can display diverse functionalities.

Synthesis of Multivalent Organotellurium Chain-Transfer Agents by Post-modification and Their Applications in Living Radical Polymerization

Functionalized or multivalent organotellurium chain-transfer agents (CTAs) for living radical polymerization were synthesized by post-modification, which involved the condensation between a carboxylic-acid-functionalized CTA and various amines in excellent yields without affecting the reactive tellurium moiety. The CTAs exhibited high synthetic versatility for radical polymerization and gave structurally well-controlled polymers, such as multiarmed polymers, from various monomers. Because all new CTAs are easily available on a large scale by simple purification, the current method significantly facilitates macromolecular engineering based on organotellurium-mediated radical polymerization (TERP).

A well-defined block copolymer synthesis via living cationic polymerization and nitroxide-mediated polymerization using carboxylic acid-based alkoxyamines as a dual initiator

A series of carboxylic acid-based alkoxyamines associated with SnBr₄, a Lewis acid, have been used as protonic acids of a binary initiating system to control the cationic polymerization of vinyl ether.

Alternating copolymerization by nitroxide-mediated polymerization and subsequent orthogonal functionalization

A novel method for the preparation of functionalized alternating copolymers is presented. Nitroxide-mediated polymerization of hexafluoroisopropyl acrylate with 7-octenyl vinyl ether provides the corresponding alternating polymer, which can be chemically modified using two orthogonal polymer-analogous reactions. A thiol-ene click reaction followed by amidation provides dual-functionalized alternating copolymers. The potential of this method is illustrated by the preparation of a small library (15 examples) of functionalized alternating copolymers.

Expanding the Scope of Controlled Radical Polymerization via Cobalt-Tellurium Radical Exchange Reaction

Cobalt-mediated radical polymerization (CMRP) and tellurium-mediated radical polymerization (TERP) were combined for the first time, offering new perspectives in the precision design of macromolecular structures. In particular, the present work highlights the benefits of this strategy for the synthesis of novel poly(vinyl acetate)-based block copolymers. A range of well-defined poly(vinyl acetate)s (PVAc) were first produced via CMRP using the bis(acetylacetonato)cobalt(II) complex (Co(acac)₂) as a regulating agent. Substitution of a methyltellanyl moiety for Co(acac)₂ at the ω-chain end of the precursor was then achieved upon treatment with dimethylditelluride. In contrast to the PVAc prepared by TERP, the ones produced by sequential CMRP and Co/Te exchange reaction almost exclusively consist of regular head-to-tail-TeMe chain-end species that can be activated by TERP. Ultimately, a series of monomers problematic in Co(acac)₂-mediated radical polymerization including N-isopropylacrylamide (NIPAM), 2-(dimethylamino)ethyl acrylate (ADAME), n-butyl acrylate (BA), isoprene (IP), and vinylimidazole (NVIm) were polymerized by TERP from the PVAc-TeMe macroinitiators leading to novel diblock copolymers that cannot be made by each technique used separately.

Organotellurium-mediated living radical polymerization under photoirradiation by a low-intensity light-emitting diode

A low-intensity (6 W) light-emitting diode (LED) effectively activated an organotellurium chain transfer agent and the dormant species, promoting well-controlled radical polymerization. The use of the LED provided many advantages over the previously reported high-intensity Hg lamp, including high energy efficiency during the polymerization, and easy availability of the low-cost light source. Structurally well-defined poly(methyl methacrylate), poly(methyl acrylate), and polystyrene, with narrow molecular weight distributions, were synthesized under LED irradiation with or without a neutral density filter.

Highly Controlled Organotellurium-Mediated Living Radical Polymerization (TERP) in Ionic Liquids (ILs). The New Role of ILs in Radical Reactions

Ionic liquids (ILs) served perfectly as solvents for the organotellurium-mediated living radical polymerization (TERP) of methyl methacrylate (MMA), methyl acrylate (MA), and styrene. The reaction rate of polymerizing MMA and MA was significantly increased as previously reported, and the controllability of the polydispersity index (PDI) was also improved by a great margin. The TERP of MMA can now give poly(methyl methacrylates) (PMMAs) with PDIs less than 1.1 and nearly full conversion in a half hour without the presence of (TeMe)₂. The kinetic study revealed that the improved control could be ascribed to a faster degenerative chain transfer (DT) reaction which plays a key role in the control of PDI for TERP. Besides the polar effect of ILs, the existence of Lewis acid-base interaction between ILs and the Te atom was proven by UV-vis spectroscopy and ¹²⁵Te NMR results. Such positive interaction lowered the activation energy of the DT process.