Combining RAFT Radical Polymerization and Click/Highly Efficient Coupling Chemistries: A Powerful Strategy for the Preparation of Novel Materials

Linear Block Copolymer Synthesis

Block copolymers form the basis of the most ubiquitous materials such as thermoplastic elastomers, bridge interphases in polymer blends, and are fundamental for the development of high-performance materials. The driving force to further advance these materials is the accessibility of block copolymers, which have a wide variety in composition, functional group content, and precision of their structure. To advance and broaden the application of block copolymers will depend on the nature of combined segmented blocks, guided through the combination of polymerization techniques to reach a high versatility in block copolymer architecture and function. This review provides the most comprehensive overview of techniques to prepare linear block copolymers and is intended to serve as a guideline on how polymerization techniques can work together to result in desired block combinations. As the review will give an account of the relevant procedures and access areas, the sections will include orthogonal approaches or sequentially combined polymerization techniques, which increases the synthetic options for these materials.

A Study on the Dual Thermo- and pH-Responsive Behaviors of Well-Defined Star-like Block Copolymers Synthesize by Combining of RAFT Polymerization and Thiol-Ene Click Reaction

A series of stimuli-responsive star-like block copolymers are synthesized via the combination of reversible addition, fragmentation chain transfer (RAFT) polymerization, and photo-initiated thiol-ene (PITE) click reaction. The controllable block ratio and block sequence, narrow distribution of molecular weight, and customized arm numbers of the star-shaped copolymers reveal the feasibility and benefits of combination of RAFT polymerization and PITE click reaction for synthesis of well-defined star-like (co)polymers. A clear insight into the relationship among the arm number, block sequence, and block ratio of the star-like block copolymers and their stimuli-responsive aggregation behavior was achieved via dynamic light scattering and UV-vis spectroscopy study. Notably, the star-like poly(acrylic acid)-b-poly(2-(dimethylamino) ethyl methacrylate) (star-PAA-b-PDMAEMA) shows higher lower critical solution temperature (LCST) compared to star-PDMAEMA-b-PAA with the same arm number and block ratio due to the inner charged PAA segments at pH > IEP. In addition, for star-like PAA-b-PDMAEMA, higher PAA content enhances the hydrophilicity of the polymer in basic solution and leads to the LCST increase, except for star-PAA1-b-PDMAEMA4 at pH = 9.0 (≈IEP). For star-PDMAEMA-b-PAA, the PAA content shows minimal effect on their LCSTs, except for the polymer in solution with pH = 9.5, which is far from their IEP. The star-like block copolymers with well-defined structure and tunable composition, especially the facile-controlled block sequence, bring us a challenging opportunity to control the stimuli-responsive properties of star-like block copolymers.

RAFT-Based Polymers for Click Reactions

The parallel development of reversible deactivation radical polymerization and click reaction concepts significantly enriches the toolbox of synthetic polymer chemistry. The synergistic effect of combining these approaches manifests itself in a growth of interest to the design of well-defined functional polymers and their controlled conjugation with biomolecules, drugs, and inorganic surfaces. In this review, we discuss the results obtained with reversible addition–fragmentation chain transfer (RAFT) polymerization and different types of click reactions on low- and high-molar-mass reactants. Our classification of literature sources is based on the typical structure of macromolecules produced by the RAFT technique. The review addresses click reactions, immediate or preceded by a modification of another type, on the leaving and stabilizing groups inherited by a growing macromolecule from the chain transfer agent, as well as on the side groups coming from monomers entering the polymerization process. Architecture and self-assembling properties of the resulting polymers are briefly discussed with regard to their potential functional applications, which include drug delivery, protein recognition, anti-fouling and anti-corrosion coatings, the compatibilization of polymer blends, the modification of fillers to increase their dispersibility in polymer matrices, etc.

A comparison of RAFT and ATRP methods for controlled radical polymerization

Reversible addition-fragmentation chain-transfer (RAFT) polymerization and atom transfer radical polymerization (ATRP) are the two most common controlled radical polymerization methods. Both methods afford functional polymers with a predefined length, composition, dispersity and end group. Further, RAFT and ATRP tame radicals by reversibly converting active polymeric radicals into dormant chains. However, the mechanisms by which the ATRP and RAFT methods control chain growth are distinct, so each method presents unique opportunities and challenges, depending on the desired application. This Perspective compares RAFT and ATRP by identifying their mechanistic strengths and weaknesses, and their latest synthetic applications.

Amphiphilic copolymers in biomedical applications: Synthesis routes and property control

The request of new materials, matching strict requirements to be applied in precision and patient-specific medicine, is pushing for the synthesis of more and more complex block copolymers. Amphiphilic block copolymers are emerging in the biomedical field due to their great potential in terms of stimuli responsiveness, drug loading capabilities and reversible thermal gelation. Amphiphilicity guarantees self-assembly and thermoreversibility, while grafting polymers offers the possibility of combining blocks with various properties in one single material. These features make amphiphilic block copolymers excellent candidates for fine tuning drug delivery, gene therapy and for designing injectable hydrogels for tissue engineering. This manuscript revises the main techniques developed in the last decade for the synthesis of amphiphilic block copolymers for biomedical application. Strategies for fine tuning the properties of these novel materials during synthesis are discussed. A deep knowledge of the synthesis techniques and their effect on the performance and the biocompatibility of these polymers is the first step to move them from the lab to the bench. Current results predict a bright future for these materials in paving the way towards a smarter, less invasive, while more effective, medicine.

Formation of a Thiol-Ene Addition Product of Asthma Medication Montelukast Caused by a Widespread Tin-Based Thermal Stabilizer

We report the formation and characterization of two diastereomeric thiol-ene addition products of the asthma medication Montelukast within chewing tablets. Widespread tin-based thermal stabilizers dioctyltin bis(2-ethylhexyl thioglycolate) and monooctyltin tris(2-ethylhexyl thioglycolate), used in the manufacturing process of the medication's forming foil, were identified as the source of the thiol reactant, showing that these stabilizers may play a part in the degradation of Montelukast and APIs with functionalities similar to those of Montelukast, which should be considered during development of medication. The isolation and analysis of these impurities was performed by HPLC and UV-vis spectroscopy. HRMS and NMR data were collected to characterize and determine the structures of these compounds.

Optimizing Mannose "Click" Conjugation to Polymeric Nanoparticles for Targeted siRNA Delivery to Human and Murine Macrophages

"Smart", dual pH-responsive, and endosomolytic polymeric nanoparticles have demonstrated great potential for localized drug delivery, especially for siRNA delivery to the cytoplasm of cells. However, targeted delivery to a specific cell phenotype requires an additional level of functionality. Copper-catalyzed azide-alkyne cycloaddition (CuAAC) is a highly selective bioconjugation reaction that can be performed in conjunction with other polymerization techniques without adversely affecting reaction kinetics, but there exists some concern for residual copper causing cytotoxicity. To alleviate these concerns, we evaluated conjugation efficiency, residual copper content, and cell viability in relation to copper catalyst concentration. Our results demonstrated an optimal range for minimizing cytotoxicity while maintaining high levels of conjugation efficiency, and these conditions produced polymers with increased targeting to M2-polarized macrophages, as well as successful delivery of therapeutic siRNA that reprogrammed the macrophages to a proinflammatory phenotype.

Synthesis of a Heterotelechelic Helical Poly(methacrylamide) and its Incorporation into a Supramolecular Triblock Copolymer

We report the first heterotelechelic helical poly(methacrylamide) (PMAc) bearing orthogonal supramolecular binding sites on its chain-ends synthesized through a combination of reversible addition-fragmentation chain-transfer (RAFT) polymerization and thiol-bromo "click" chemistry. The heterotelechelic PMAc was assembled with two monotelechelic polymers featuring different secondary structures, namely a coil-like poly(styrene) and a helical poly(isocyanide), resulting in the formation of a coil-helix-helix supramolecular triblock copolymer through orthogonal metal coordination and hydrogen bonding interactions. Triblock assembly was confirmed through 1H NMR spectroscopy, isothermal titration calorimetry (ITC) and viscometry. The individual polymer blocks retained their secondary structures in the final triblock copolymer, as evidenced by circular dichroism (CD) spectroscopy. Our synthetic strategy expands the toolbox of triblock copolymers featuring structural motifs similar to the ones found in proteins and provides the potential for the development of other complex multifunctional polymeric ensembles.

Labeling of native proteins with fluorescent RAFT polymer probes: application to the detection of a cell surface protein using flow cytometry

Fluorescent RAFT polymer probes with an activated ester reactive end-group can be advantageously used to label native proteins.

Addressing the mid-point of polymer chains for multiple functionalization purposes through sequential thiol–epoxy ‘click’ and esterification reactions

A synthetic strategy is devised for the preparation of mid-chain multifunctional polymers.

Preparation of Well-Defined Propargyl-Terminated Tetra-Arm Poly(N-isopropylacrylamide)s and Their Click Hydrogels Crosslinked with β-cyclodextrin

As an important class of reversible deactivation radical polymerization (RDRP), reversible addition fragmentation chain transfer (RAFT) polymerization has attracted great attention attributed to its facile and flexible features to prepare well-defined polymers with different complex structures. In addition, the combination of RAFT with click chemistry provides more effective strategies to fabricate advanced functional materials. In this work, a series of temperature responsive tetra-arm telechelic poly(N-isopropylacrylamide)s (PNIPAs) with propargyl end groups were prepared for the first time through RAFT and subsequent aminolysis/Michael addition modification. The temperature sensitivities of their aqueous solutions were researched via turbidity measurement. It was found that the phase transition temperature of obtained PNIPAs increased with their molecular weights ascribed to their distinctions in the hydrophobic/hydrophilic balance. Subsequently, β-cyclodextrin (β-CD) functionalized with azide moieties was used to crosslink the prepared propargyl-terminated tetra-arm PNIPAs through click chemistry, fabricating corresponding hydrogels with thermoresponse. Similar to their precursors, the hydrogels demonstrated the same dependence of volume phase transition temperature (VPTT) on their molecular weights. In addition, the incorporation of β-CD and the residual groups besides crosslinking may provide a platform for imparting additional functions such as inclusion and adsorption as well as further functionalization.

Orthogonal Modification of Polymers via Thio-Bromo "Click" Reaction and Supramolecular Chemistry: An Easy Method Toward Head-to-Tail Self-Assembled Supramolecular Polymers

Heterotelechelic poly(n-butyl acrylate)s (PnBuA) bearing two different and complementing supramolecular groups (namely, barbiturate (Ba) and the Hamilton wedge (HW)) at their α-end and ω-end (Ba-PnBuA-HW) were prepared by a combination of the reversible addition-fragmentation chain transfer (RAFT) process and the thio-bromo click reaction. The successful synthesis of the heterotelechelic H-bonding polymer Ba-PnBuA-HW (M_n,NMR = 7700 g/mol, M_n,SEC = 7500 g/mol, PDI = 1.25) was proven by a combination of ¹H NMR and MALDI-TOF mass spectrometry. Self-assembly of the resulting heterotelechelic H-bonding polymers (Ba-PnBuA-HW) in a head-to-tail fashion driven by multiple H-bondings in solution and in the bulk was proven by temperature-dependent ¹H NMR, concentration-dependent DOSY NMR studies, and rheological measurements.

One-pot synthesis and self-assembly of supramolecular dendritic polymers

A X–Y₂ type heterotropic single-chain polymer, Ba-(PnBuA-HW)₂, is prepared in a one-pot two-step reaction, subsequently self-assembling into supramolecular dendrimers, which are displaying solvent-dependent disc-like hierarchical nanoscopic structures as evidenced by AFM.

A bifunctional amorphous polymer exhibiting equal linear and circular photoinduced birefringences

The large and reversible photoinduced linear and circular birefringences in azo-compounds are at the basis of the interest in these materials, which are potentially useful for several applications. Since the onset of the linear and circular anisotropies relies on orientational processes, which typically occur on the molecular and supramolecular length scale, respectively, a circular birefringence at least one order of magnitude lower than the linear one is usually observed. Here, the synthesis and characterization of an amorphous polymer with a dimeric repeating unit containing a cyanoazobenzene and a cyanobiphenyl moiety are reported, in which identical optical linear and circular birefringences are induced for proper light dose and ellipticity. A pump-probe technique and an analytical method based on the Stokes-Mueller formalism are used to investigate the photoinduced effects and to evaluate the anisotropies. The peculiar photoresponse of the polymer makes it a good candidate for applications in smart functional devices.

A guide to the synthesis of block copolymers using reversible-addition fragmentation chain transfer (RAFT) polymerization

The discovery of reversible-deactivation radical polymerization (RDRP) has provided an avenue for the synthesis of a vast array of polymers with a rich variety of functionality and architecture. The preparation of block copolymers has received significant focus in this burgeoning research field, due to their diverse properties and potential in a wide range of research environments. This tutorial review will address the important concepts behind the design and synthesis of block copolymers using reversible addition-fragmentation chain transfer (RAFT) polymerization. RAFT polymerization is arguably the most versatile of the RDRP methods due to its compatibility with a wide range of functional monomers and reaction media along with its relative ease of use. With an ever increasing array of researchers that possess a variety of backgrounds now turning to RDRP, and RAFT in particular, to prepare their required polymeric materials, it is pertinent to discuss the important points which enable the preparation of high purity functional block copolymers with targeted molar mass and narrow molar mass distribution using RAFT polymerization. The key principles of appropriate RAFT agent selection, the order of monomer addition in block synthesis and potential issues with maintaining high end-group fidelity are addressed. Additionally, techniques which allow block copolymers to be accessed using a combination of RAFT polymerization and complementary techniques are touched upon.

Thermoresponsive PNIPAAM bottlebrush polymers with tailored side-chain length and end-group structure

We explore the phase behaviour, solution conformation, and interfacial properties of bottlebrush polymers with side-chains comprised of poly(N-isopropylacrylamide) (PNIPAAM), a thermally responsive polymer that exhibits a lower critical solution temperature (LCST) in water. PNIPAAM bottlebrush polymers with controlled side-chain length and side-chain end-group structure are prepared using a "grafting-through" technique. Due to reduced flexibility of bottlebrush polymer side-chains, side-chain end-groups have a disproportionate effect on bottlebrush polymer solubility and phase behaviour. Bottlebrush polymers with a hydrophobic end-group have poor water solubilities and depressed LCSTs, whereas bottlebrush polymers with thiol-terminated side-chains are fully water-soluble and exhibit an LCST greater than that of PNIPAAM homopolymers. The temperature-dependent solution conformation of PNIPAAM bottlebrush polymers in D2O is analyzed by small-angle neutron scattering (SANS), and data analysis using the Guinier-Porod model shows that the bottlebrush polymer radius decreases as the temperature increases towards the LCST for PNIPAAM bottlebrush polymers with relatively long 9 kg mol(-1) side-chains. Above the LCST, PNIPAAM bottlebrush polymers can form a lyotropic liquid crystal phase in water. Interfacial tension measurements show that bottlebrush polymers reduce the interfacial tension between chloroform and water to levels comparable to PNIPAAM homopolymers without the formation of microemulsions, suggesting that bottlebrush polymers are unable to stabilize highly curved interfaces. These results demonstrate that bottlebrush polymer side-chain length and flexibility impact phase behavior, solubility, and interfacial properties.

Poly(N-isopropylacrylamide) hydrogels fabricated via click chemistry: well-defined α,ω-bis propargyl linear poly(N-isopropylacrylamide)s as crosslinkers

This work provides a facile method to regulate swelling properties and/or to impart special functions for click poly(N-isopropylacrylamide) (PNIPA) hydrogels, by adjusting the chain length of crosslinkers or by introducing other functional groups.

Thiol–ene “click” reactions and recent applications in polymer and materials synthesis: a first update

This contribution serves as an update to a previous review (Polym. Chem.2010,1, 17–36) and highlights recent applications of thiol–ene ‘click’ chemistry as an efficient tool for both polymer/materials synthesis as well as modification.

Straightforward RAFT procedure for the synthesis of heterotelechelic poly(acrylamide)s

Heterotelechelic, hydrophilic polymers with a primary amine and thiol group at the α- and ω-chain end, respectively, are synthesized via reversible addition-fragmentation chain transfer (RAFT) polymerization in a straightforward and versatile way and subsequently used for the design of dual-responsive polymer/gold nanohybrids. Therefore, a phthalimido-containing chain transfer agent (CTA) is synthesized and used for the polymerization of the hydrophilic monomers N-isopropylacrylamide (NIPAM) and N,N-dimethylacrylamide (DMA). After polymerization, the trithiocarbonate functionality at the ω-chain end, originating from the CTA, is converted into a thiol upon aminolysis. In the next step, the phthalimido α-chain end is hydrolyzed into a primary amine, resulting in heterotelechelic, hydrophilic polymers. End-group conversions are monitored by (1)H NMR spectroscopy, MALDI-TOF MS analysis, and UV-Vis spectroscopy, confirming that quantitative modifications are obtained during each stage. The amino groups of these heterotelechelic polymer chains are modified with citraconic anhydride, after which the obtained polymers are grafted with the thiol group onto citrate-stabilized gold nanoparticles resulting in the creation of dual-temperature- and pH-responsive gold particles.

One-pot RAFT/"click" chemistry via isocyanates: efficient synthesis of α-end-functionalized polymers

A new methodology has been developed for preparing α-functional polymers in a one-pot simultaneous polymerization/isocyanate "click" reaction. Our original synthetic strategy is based on the preparation of a carbonyl-azide chain transfer agent (CTA) precursor that undergoes the Curtius rearrangement in situ during reversible addition-fragmentation chain transfer (RAFT) polymerization yielding well-controlled α-isocyanate modified polymers. This strategy overcomes numerous difficulties associated with the synthesis of a polymerization mediator bearing an isocyanate at the R group and with the handling of such a reactive functionality. This new carbonyl-azide CTA can control the polymerization of a wide range of monomers, including (meth)acrylates, acrylamides, and styrenes (M(n) = 2-30 kDa; Đ = 1.16-1.38). We also show that this carbonyl-azide CTA can be used as a universal platform for the synthesis of α-end-functionalized polymers in a one-pot RAFT polymerization/isocyanate "click" procedure.

Living Radical Polymerization by the RAFT Process – A Third Update

This paper provides a third update to the review of reversible deactivation radical polymerization (RDRP) achieved with thiocarbonylthio compounds (ZC(=S)SR) by a mechanism of reversible addition-fragmentation chain transfer (RAFT) that was published in June 2005 (Aust. J. Chem. 2005, 58, 379). The first update was published in November 2006 (Aust. J. Chem. 2006, 59, 669) and the second in December 2009 (Aust. J. Chem. 2009, 62, 1402). This review cites over 700 publications that appeared during the period mid 2009 to early 2012 covering various aspects of RAFT polymerization which include reagent synthesis and properties, kinetics and mechanism of polymerization, novel polymer syntheses, and a diverse range of applications. This period has witnessed further significant developments, particularly in the areas of novel RAFT agents, techniques for end-group transformation, the production of micro/nanoparticles and modified surfaces, and biopolymer conjugates both for therapeutic and diagnostic applications.