One-Pot Synthesis of Colloidal Nanobowls and Hybrid Multipod-like Nanoparticles by Radiation Miniemulsion Polymerization

Polymeric Bowl-Shaped Nanoparticles: Hollow Structures with a Large Opening on the Surface

Polymeric bowl-shaped nanoparticles (BNPs) are anisotropic hollow structures with large openings on the surface, which have shown advantages such as high specific area and efficient encapsulation, delivery and release of large-sized cargoes on demand compared to solid nanoparticles or closed hollow structures. Several strategies have been developed to prepare BNPs based on either template or template-free methods. For instance, despite the widely used self-assembly strategy, alternative methods including emulsion polymerization, swelling and freeze-drying of polymeric spheres, and template-assisted approaches have also been developed. It is attractive but still challenging to fabricate BNPs due to their unique structural features. However, there is still no comprehensive summary of BNPs up to now, which significantly hinders the further development of this field. In this review, the recent progress of BNPs will be highlighted from the perspectives of design strategies, preparation methods, formation mechanisms, and emerging applications. Moreover, the future perspectives of BNPs will also be proposed.

Synthetic Strategies for Polymer Particles with Surface Concavities

Over the past decade or so, there has been increasing interest in the synthesis of polymer particles with surface concavities, which mainly include golf ball-like, dimpled and surface-wrinkled polymer particles. Such syntheses generally can be classified into direct polymerization and post-treatment on preformed polymer particles. This review aims to provide an overview of the synthetic strategies of such particles. Some selected examples are given to present the formation mechanisms of the surface concavities. The applications and future development of these concave polymer particles are also briefly discussed. This article is protected by copyright. All rights reserved.

Core-Shell Interface-Oriented Synthesis of Bowl-Structured Hollow Silica Nanospheres Using Self-Assembled ABC Triblock Copolymeric Micelles

Hollow porous silica nanospheres (HSNs) are emerging classes of cutting-edge nanostructured materials. They have elicited much interest as carriers of active molecule delivery due to their amorphous chemical structure, nontoxic nature, and biocompatibility. Structural development with hierarchical morphology is mostly required to obtain the desired performance. In this context, large through-holes or pore openings on shells are desired so that the postsynthesis loading of active-molecule onto HSNs via a simple immersion method can be facilitated. This study reports the synthesis of HSNs with large through-holes or pore openings on shells, which are subsequently termed bowl-structured hollow porous silica nanospheres (BHSNs). The synthesis of BHSNs was mediated by the core-shell interfaces of the core-shell corona-structured micelles obtained from a commercially available ABC triblock copolymer (polystyrene- b-poly(2-vinylpyridine)- b-poly(ethylene oxide) (PS-P2VP-PEO)). In this synthesis process, polymer@SiO₂ composite structure was formed because of the deposition of silica (SiO₂) on the micelles' core. The P2VP block played a significant role in the hydrolysis and condensation of the silica precursor, i.e., tetraethylorthosilicate (TEOS) and then maintaining the shell's growth. The PS core of the micelles built the void spaces. Transmission electron microscopy (TEM) images revealed a spherical hollow structure with an average particle size of 41.87 ± 3.28 nm. The average diameter of void spaces was 21.71 ± 1.22 nm, and the shell thickness was 10.17 ± 1.68 nm. According to the TEM image analysis, the average large pore was determined to be 15.95 nm. Scanning electron microscopy (SEM) images further confirmed the presence of large single pores or openings in shells. These were formed as a result of the accumulated ethanol on the PS core acting to prevent the growth of silica.

Facile fabrication of bowl-shaped microparticles for oral curcumin delivery to ulcerative colitis tissue

Oral microparticles (MPs) have been considered as promising drug carriers in the treatment of ulcerative colitis (UC). Here, a facile strategy based on a conventional emulsion-solvent evaporation technique was used to fabricate bowl-shaped MPs (BMPs), and these MPs loaded with anti-inflammatory drug (curcumin, CUR) during the fabrication process. The physicochemical properties of the resultant BMPs were characterized by dynamic light scattering, scanning electron microscope, confocal laser scanning microscope and X-ray diffraction as well as contact angle goniometer. Results indicated that BMPs had a desirable hydrodynamic diameter (1.84 ± 0.20 μm), a negative zeta potential (-26.5 ± 1.13 mV), smooth surface morphology, high CUR encapsulation efficiency and controlled drug release profile. It was found that CUR molecules were dispersed in an amorphous state within the polymeric matrixes. In addition, BMPs showed excellent hydrophilicity due to the presence of Pluronic F127 and poly(vinyl alcohol) on their surface. More importantly, orally administered BMPs could efficiently alleviate UC based on a dextran sulfate sodium-induced mouse model. These results collectively suggest that BMP can be exploited as a readily scalable oral drug delivery system for UC therapy.

Syntheses and biomedical applications of hollow micro-/nano-spheres with large-through-holes

This review mainly discussed the syntheses and biomedical applications of hollow micro-/nano-spheres with large-through-holes in shells.

Facile Fabrication of Antibacterial Core–Shell Nanoparticles Based on PHMG Oligomers and PAA Networks via Template Polymerization

Antibacterial core–shell nanoparticles based on poly(hexamethylene guanidine hydrochloride) (PHMG) oligomers and poly(acrylic acid) (PAA) networks are efficiently fabricated via a facile one-step co-polymerization of acrylic acid and N,N′-methylenebisacrylamide on PHMG templates in aqueous solution. Dynamic light scattering, Fourier-transform infrared spectroscopy, and transmission electron microscopy observations were used to characterize the size, morphology, and structure of the nanoparticles, as well as the interactions between the components. Also, the stability of the nanoparticle dispersion against storage, pH value, salt, and temperature was investigated. The results show that the crosslinked PAA/PHMG nanoparticles are stabilized by electrostatic interactions. The core–shell structure of the nanoparticles was confirmed by transmission electron microscopy observation. The size of the nanoparticles increases substantially with extension of storage or with increase of the salt concentration. The nanoparticle dispersion is stable in a pH range of 2.0–4.0. The size change of the nanoparticles with pH of the medium is parabolic, and the minimum size is reached at pH 3.0. A rise of temperature leads to a slight and recoverable size increase of the nanoparticles. Antibacterial efficiency was evaluated quantitatively against Escherichia coli and Staphylococcus aureus by the plating method according to Standard JC/T 897–2002. The antibacterial activity against these two bacteria are both above 99.0 % at a nanoparticle concentration of 5 mg mL–1. This makes the nanoparticle dispersion a good candidate for the application of antibacterial water-based coatings and textiles coating.