Highly Sensitive Dual-Mode Fluorescence Detection of Lead Ion in Water Using Aggregation-Induced Emissive Polymers

Hyaluronic Acid Methacrylate Hydrogel-Modified Electrochemical Device for Adsorptive Removal of Lead(II)

This paper presents the development of a compact, three-electrode electrochemical device functionalized by a biocompatible layer of hyaluronic acid methacrylate (HAMA) hydrogel for the adsorptive removal of detrimental lead (Pb(II)) ions in aqueous solutions. An adsorption mechanism pertaining to the observed analytical performance of the device is proposed and further experimentally corroborated. It is demonstrated that both the molecular interactions originating from the HAMA hydrogel and electrochemical accumulation originating from the electrode beneath contribute to the adsorption capability of the device. Infrared spectral analysis reveals that the molecular interaction is mainly induced by the amide functional group of the HAMA hydrogel, which is capable of forming the Pb(II)–amide complex. In addition, inductively coupled plasma mass spectrometric (ICP-MS) analysis indicates that the electrochemical accumulation is particularly valuable in facilitating the adsorption rate of the device by maintaining a high ion-concentration gradient between the solution and the hydrogel layer. ICP-MS measurements show that 94.08% of Pb(II) ions present in the test solution can be adsorbed by the device within 30 min. The HAMA hydrogel-modified electrochemical devices exhibit reproducible performance in the aspect of Pb(II) removal from tap water, with a relative standard deviation (RSD) of 1.28% (for n = 8). The experimental results suggest that the HAMA hydrogel-modified electrochemical device can potentially be used for the rapid, on-field remediation of Pb(II) contamination.

Aggregation-Induced Emission Properties in Fully π-Conjugated Polymers, Dendrimers, and Oligomers

Aggregation-Induced Emission (AIE) in organic molecules has recently attracted the attention of the scientific community because of their potential applications in different fields. Compared to small molecules, little attention has been paid to polymers and oligomers that exhibit AIE, despite having excellent properties such as high emission efficiency in aggregate and solid states, signal amplification effect, good processability and the availability of multiple functionalization sites. In addition to these features, if the molecular structure is fully conjugated, intramolecular electronic interactions between the composing chromophores may appear, thus giving rise to a wealth of new photophysical properties. In this review, we focus on selected fully conjugated oligomers, dendrimers and polymers, and briefly summarize their synthetic routes, fluorescence properties and potential applications. An exhaustive comparison between spectroscopic results in solution and aggregates or in solid state has been collected in almost all examples, and an opinion on the future direction of the field is briefly stated.

Diels-Alder Polymer Networks with Temperature-Reversible Cross-Linking-Induced Emission

A novel synthetic strategy gives reversible cross-linked polymeric materials with tunable fluorescence properties. Dimaleimide-substituted tetraphenylethene (TPE-2MI), which is non-emissive owing to the photo-induced electron transfer (PET) between maleimide (MI) and tetraphenylethene (TPE) groups, was used to cross-link random copolymers of methyl (MM), decyl (DM) or lauryl (LM) methacrylate with furfuryl methacrylate (FM). The mixture of copolymer and TPE-2MI in DMF showed reversible fluorescence with "on/off" behavior depending on the Diels-Alder (DA)/retro-DA process, which is easily adjusted by temperature. At high temperatures, the retro-DA reaction is dominant, and the fluorescence is quenched by the photo-induced electron transfer (PET) mechanism. In contrast, at low temperatures, the emission recovers as the DA reaction takes over. A transparent PMFM/TPE-2MI polymer film was prepared which shows an accurate response to the external temperature and exhibited tunable fluorescent "turn on/off" behavior. These results suggest the possible application in areas including information security and transmission. An example of invisible/visible writing is given.

A water-soluble molecular probe with aggregation-induced emission for discriminative detection of Al3+ and Pb2+ and imaging in seedling root of Arabidopsis

Luminogens with aggregation-induced emission (AIE) have been used to develop a new type of molecular probes based on analyte-triggered aggregation, but it still remains a challenge to design water-soluble AIE-active probe for specific detection of metal ions. Herein, we designed and synthesized a water-soluble molecular probe with AIE property for discriminative detection of aluminum ion and lead ion. Four carboxylic acid groups were incorporated into a tetraphenylethylene unit to enhance the coordination affinity and increase water-solubility in aqueous solution. The designed probe can be selectively lighted up by aluminum ion and lead ion via coordination-triggered AIE process. Discrimination of aluminum ion and lead ions based on the probe can be achieved in quantitative manner with the assistance of suitable masking reagents. This probe was further used to image aluminum ions in living cells of seedling roots of Arabidopsis, and the results showed that this probe is capable of imaging aluminum ions in living cells avoiding the interference of lead ions, and is suited for long-term imaging due to its excellent photostability. This work expands the application scope of AIE-active probes in discriminative detection of metal ions, and provides a design direction for water-soluble AIE probes to avoid the false signals from self-precipitation under physiological conditions.

Multicomponent Polymerizations of Alkynes, Sulfonyl Azides, and 2-Hydroxybenzonitrile/2-Aminobenzonitrile toward Multifunctional Iminocoumarin/Quinoline-Containing Poly(N-sulfonylimine)s

Multicomponent polymerizations (MCPs) provide a powerful synthetic tool for the construction of polymers with complex structures and multifunctionalities, owing to their great structural diversity, mild condition, high efficiency, simple procedure, and environmental benefit. They possess significant advantages in synthesizing heteroatom-rich or heterocycle-containing functional polymers through directly constructing fused heterocycles from the MCP. In this work, the MCPs of diynes, disulfonyl azides, and 2-hydroxybenzonitrile or 2-aminobenzonitrile were reported under the catalysis of CuCl and Et₃N, generating iminocoumarin/quinoline-containing poly(N-sulfonylimine)s with high molecular weights (up to 37700 g/mol) and high yields (up to 96%). The MCPs enjoy a wide monomer scope and high atom economy, releasing N₂ as the only byproduct. The fluorescent poly(N-sulfonylimine) can be utilized for sensitive and selective detection of Ru³⁺, which also possesses antibacterial properties. The efficient MCPs could produce polymers with unique structures and functionalities, thereby accelerating the development of polymer materials.

Photoluminescent polymeric micelles from poly(ethylene oxide)-block-poly(((4-vinylphenyl)ethene-1,1,2-triyl)tribenzene) diblock copolymers

We report the synthesis of poly(ethylene oxide)-block-poly(((4-vinylphenyl)ethene-1,1,2-triyl)tribenzene) diblock copolymers via RAFT polymerization. The diblock copolymers were capable of self-assembling into photoluminescent micelles in aqueous media.

Polyurethanes with aggregation-enhanced emission characteristics: preparation and properties

An amino-terminated poly(propylene glycol)-modified tetraaryl-buta-1,3-diene derivative (TABDAA) was introduced to synthesize polyurethanes with different ratios of soft/hard segments. A mixture of TABDAA and poly(tetrahydrofuran) 1000 as the soft segments was reacted with 4,4-diphenylmethane diisocyanate and 1,4-butanediol as the hard segments in molar ratios of 1 : 2 : 1, 2 : 3 : 1, and 3 : 4 : 1 to give the desired polyurethanes named TMPU-211, TMPU-321 and TMPU-431, respectively. The three polyurethanes exhibited different aggregation-enhanced emission (AEE) behaviors because of their different soft/hard segment ratios. The polyurethanes with a higher soft segment content tended to form bigger particles in a DMF/water mixture solution, thus causing a sharper increase in their fluorescence intensity. In addition, the polyurethane films exhibited different fluorescence intensities after different heat treatments. After a quenching treatment of the soft segments in the polyurethane films, the fluorescence intensity dropped greatly. When these quenched polyurethane films were thermally annealed at 60 °C for 24 hours, their fluorescence intensity exceeded the initial intensity of the as-prepared films. Differential scanning calorimetry results showed that the polyurethane films in the quenched condition did not present the endothermal melting peak of the soft segments, and the melting peaks appeared again after thermal annealing. AFM experiments showed that an ordered arrangement was achieved after the heat treatment of these AEE polyurethane films. These results demonstrated that the polymer structure had a significant effect on the AEE properties of the polyurethane films, and more importantly, it is of great significance in improving the fluorescence emission of the AEE polymers and also for their potential application in fluorescent probes, stimuli-responsive materials, PLED devices and so on.