High Glass Transition Temperature Renewable Polymers via Biginelli Multicomponent Polymerization

Biodegradable polyester copolymers: synthesis based on the Biginelli reaction, characterization, and evaluation of their application properties

The Biginelli reaction, a three-component cyclocondensation reaction, is an important member of the multicomponent reaction (MCR) family. In this study, we conducted end-group modifications on a variety of biodegradable polyesters, including poly(1,4-butylene adipate) (PBA), poly(ε-caprolactone) (PCL), polylactic acid (PLA), and poly(p-dioxanone) (PPDO), based on the precursor polyethylene glycol (PEG). By combining two polymers through the Biginelli multi-component reaction, four new biodegradable polyester copolymers, namely DHPM-PBA, DHPM-PCL, DHPM-PLA, and DHPM-PPDO, were formed. These Biginelli reactions demonstrated exceptional completeness, validating the efficiency of the synthesis strategy. Although the introduction of various polyesters lead to different properties, such as crystallinity and cytotoxicity, the newly synthesized 3,4-dihydro-2(H)-pyrimidinone compounds (DHPMs) exhibit enhanced hydrophilicity and can self-assemble in water and N,N-dimethylformamide (DMF) solution to form micelles with a controllable size. Furthermore, DHPM-PPDO promotes cellular growth and has potential applications in wound healing and tissue engineering. In conclusion, this method demonstrates great universality and methodological significance and offers insights into the medical applications of polyethylene glycol.

Copper(II) nanodots stabilized on Cassia fistula galactomannan: preparation and catalytic application towards fast solvent-free Biginelli reactions

New Cu(II) nanodots have been developed using biopolymeric polysaccharide galactomannan. The nanocatalyst Cu(II)NDs@CFG has been developed through a one-step clean and sustainable reaction of Cassia fistula galactomannan and CuSO4·5H2O in an aqueous medium. The catalyst Cu(II)NDs@CFG is well characterized by FT-IR, FE-SEM, EDS, ICP-MS, HR-TEM, XPS, XRD, TGA and BET analysis. This is the first example of preparing copper nanodots by using polysaccharide galactomannan as a supporting template to form copper nanodots in water. Moreover, the copper nanodots act as a potential nanocatalyst for multicomponent Biginelli reactions. A simple, one pot, efficient and environmentally benign synthesis of 3,4-dihydropyrimidin-2(1H)-ones/thiones has been achieved with wide variety of aldehydes, β-dicarbonyl compounds and urea or thiourea indicating the good tolerance of the catalyst towards various functionalities. The presented work has several merits in terms of economy which include easy operation, complete avoidance of toxic organic solvents and expensive catalysts, simple work-up, less reaction time, and excellent yields.

Recent Developments in Functional Polymers via the Kabachnik-Fields Reaction: The State of the Art

Recently, multicomponent reactions (MCRs) have attracted much attention in polymer synthesis. As one of the most well-known MCRs, the Kabachnik-Fields (KF) reaction has been widely used in the development of new functional polymers. The KF reaction can efficiently introduce functional groups into polymer structures; thus, polymers prepared via the KF reaction have unique α-aminophosphonates and show important bioactivity, metal chelating abilities, and flame-retardant properties. In this mini-review, we mainly summarize the latest advances in the KF reaction to synthesize functional polymers for the preparation of heavy metal adsorbents, multifunctional hydrogels, flame retardants, and bioimaging probes. We also discuss some emerging applications of functional polymers prepared by means of the KF reaction. Finally, we put forward our perspectives on the further development of the KF reaction in polymer chemistry.

Thiocarbohydrazone and Chalcone-Derived 3,4-Dihydropyrimidinethione as Lipid Peroxidation and Soybean Lipoxygenase Inhibitors

The potential of the 4,6-diphenyl-3,4-dihydropyrimidine-2(1H)-thione (abbreviated as KKII5) and (E)-N'-benzylidenehydrazinecarbothiohydrazide (abbreviated as DKI5) compounds as possible drug leads is investigated. KKII5 and DKI5 are synthesized in high yield of up to 97%. Their structure, binding in the active site of the LOX-1 enzyme, and their toxicity are studied via joint experimental and computational methodologies. Specifically, the structure assignment and conformational analysis were achieved by applying homonuclear and heteronuclear 2D nuclear magnetic resonance (NMR) spectroscopy (2D-COSY, 2D-NOESY, 2D-HSQC, and 2D-HMBC) and density functional theory (DFT). The obtained DFT lowest energy conformers were in agreement with the NOE correlations observed in the 2D-NOESY spectra. Additionally, docking and molecular dynamics simulations were performed to discover their ability to bind and remain stabile in the active site of the LOX-1 enzyme. These in silico experiments and DFT calculations indicated favorable binding for the enzyme under study. The strongest binding energy, -9.60 kcal/mol, was observed for dihydropyrimidinethione KKII5 in the active site of LOX-1. ADMET calculations showed that the two molecules lack major toxicities and could serve as possible drug leads. The redox potential of the active center of LOX-1 with the binding molecules was calculated via DFT methodology. The results showed a significantly smaller energy attachment of 2.8 eV with KKII5 binding in comparison to DKI5. Thus, KKII5 enhanced the ability of the active center to receive electrons compared to DKI5. This is related to the stronger binding interaction of KKII5 relative to that of DK15 to LOX-1. The two very potent LOX-1 inhibitors exerted IC₅₀ 19 μΜ (KKII5) and 22.5 μΜ (DKI5). Furthermore, they both strongly inhibit lipid peroxidation, namely, 98% for KKII5 and 94% for DKI5.

Stepping Further from Coupling Tools: Development of Functional Polymers via the Biginelli Reaction

Multicomponent reactions (MCRs) have been used to prepare polymers with appealing functions. The Biginelli reaction, one of the oldest and most famous MCRs, has sparked new scientific discoveries in polymer chemistry since 2013. Recent years have seen the Biginelli reaction stepping further from simple coupling tools; for example, the functions of the Biginelli product 3,4-dihydropyrimidin-2(1H)-(thi)ones (DHPM(T)) have been gradually exploited to develop new functional polymers. In this mini-review, we mainly summarize the recent progress of using the Biginelli reaction to identify polymers for biomedical applications. These polymers have been documented as antioxidants, anticancer agents, and bio-imaging probes. Moreover, we also provide a brief introduction to some emerging applications of the Biginelli reaction in materials and polymer science. Finally, we present our perspectives for the further development of the Biginelli reaction in polymer chemistry.

Synthesis, properties and catalysis of quantum dots in C–C and C-heteroatom bond formations

Luminescent quantum dots (QDs) represent a new form of carbon nanomaterials which have gained widespread attention in recent years, especially in the area of chemical sensing, bioimaging, nanomedicine, solar cells, light-emitting diode (LED), and electrocatalysis. Their extremely small size renders some unusual properties such as quantum confinement effects, good surface binding properties, high surface‐to‐volume ratios, broad and intense absorption spectra in the visible region, optical and electronic properties different from those of bulk materials. Apart from, during the past few years, QDs offer new and versatile ways to serve as photocatalysts in organic synthesis. Quantum dots (QD) have band gaps that could be nicely controlled by a number of factors in a complicated way, mentioned in the article. Processing, structure, properties and applications are also reviewed for semiconducting quantum dots. Overall, this review aims to summarize the recent innovative applications of QD or its modified nanohybrid as efficient, robust, photoassisted redox catalysts in C–C and C-heteroatom bond forming reactions. The recent structural modifications of QD or its core structure in the development of new synthetic methodologies are also highlighted. Following a primer on the structure, properties, and bio-functionalization of QDs, herein selected examples of QD as a recoverable sustainable nanocatalyst in various green media are embodied for future reference.

Synthesis of High Performance Thiophene-Aromatic Polyesters from Bio-Sourced Organic Acids and Polysaccharide-Derived Diol: Characterization and Degradability Studies

In this work, the feasibility of replacing petroleum-based poly(ethylene terephthalate) (PET) with fully bio-based copolyesters derived from dimethyl 2,5-thiophenedicarboxylate (DMTD), dimethyl 2,5-dimethoxyterephthalate (DMDMT), and polysaccharide-derived 1,6-hexanediol (HDO) was investigated. A systematic study of structure-property relationship revealed that the properties of these poly(thiophene-aromatic) copolyesters (PHS(20-90)) can be tailored by varying the ratio of diester monomers in the reaction, whereby an increase in DMTD content noticeably shortened the reaction time in the transesterification step due to its higher reactivity as compared with DMDMT. The copolyesters had weight-average molar masses (Mw) between 27,500 and 38,800 g/mol, and dispersity Đ of 2.0-2.5. The different polarity and stability of heterocyclic DMTD provided an efficient mean to tailor the crystallization ability of the copolyesters, which in turn affected the thermal and mechanical performance. The glass transition temperature (Tg) could be tuned from 70-100 °C, while the tensile strength was in a range of 23-80 MPa. The obtained results confirmed that the co-monomers were successfully inserted into the copolyester chains. As compared with commercial poly(ethylene terephthalate), the copolyesters displayed not only enhanced susceptibility to hydrolysis, but also appreciable biodegradability by lipases, with weight losses of up to 16% by weight after 28 weeks of incubation.

A new procedure for the preparation of 3,4-dihydropyrimidin-2(1H)-one and octahydroquinazolinone derivatives catalyzed by SCMNPs@CA-EA-SO3H under solvent-free conditions

Abstract:

Catalyzed with SCMNPs@CA-EA-SO3H, as a green and heterogeneous solid acid catalyst, 3,4-dihydropyrimidin-2(1H)-one and octahydroquinazolinone derivatives were obtained in high-to-excellent yields and in short reaction times via the one-pot multi-component condensation of ethyl acetoacetate or dimedone, urea, and aldehyde compounds under solvent-free conditions. More importantly, the green catalytic system could be easily collected from the reaction solution utilizing an external magnet and reused for five runs with a negligible decrease in yields and reaction rate.

Three-Component Dynamic Covalent Chemistry: From Janus Small Molecules to Functional Polymers

A new multicomponent reaction involving 2-hydroxybenzaldehyde, amine, and 2-mercaptobenzaldehyde (HAM reaction) has been developed and applied to multicomponent polymerization and controlled radical polymerization for the construction of random and block copolymers. This chemistry features mild reaction conditions, high yield, simple isolation, and water as the only byproduct. With the advantages of the distinct nucleophilicity of thiol and hydroxyl groups, the chemistry could be used for stepwise labeling and modifications on primary amines. The Janus chemical joint formed from this reaction exhibits degradability in buffers and generates the corresponding starting reagents, allowing amine release. Interestingly, the chemical joint exhibits thermally activated reversibility with water as the catalyst. This multicomponent dynamic covalent feature has been applied to the metamorphosis of random and block copolymers, generating polymers with diverse architectures. This chemistry is expected to be broadly applicable to synthetic polymer chemistry and materials science.

Room-Temperature Metal-Free Multicomponent Polymerizations of Elemental Selenium toward Stable Alicyclic Poly(oxaselenolane)s with High Refractive Index

Selenium-containing polymers are a group of fascinating functional polymers with unique structures, properties, and applications, which have been developed recently but only with limited examples. The challenges of developing selenium-containing polymers with structural and functional diversity include the lack of economic and safe monomers, lack of efficient and convenient synthetic approaches, and poor stability of selenium-involving covalent bonds. In this work, room-temperature metal-free multicomponent polymerizations (MCPs) of elemental selenium, diisocyanides, and dipropargyl alcohols were developed, and polymers with a selenium-containing aliphatic heterocycle, 1,3-oxaselenolane, were synthesized through these MCPs directly from elemental selenium. The alicyclic poly(oxaselenolane)s enjoyed high yields (up to 93%), high molecular weights (up to 15 600 g/mol), high thermal and chemical stability, good solubility and processability. With the structural design of the poly(oxaselenolane)s and their high selenium contents of up to 33.7 wt %, the refractive indices of their spin-coated thin films could reach 1.8026 at 633 nm and maintain 1.7770 at 1700 nm. It is anticipated that these efficient, convenient, mild, and economic multicomponent polymerizations of elemental selenium can promote the selenium-related polymer chemistry and accelerate the exploration of diversified selenium-containing functional polymer materials.

Stimuli-Responsive Multifunctional Phenylboronic Acid Polymers Via Multicomponent Reactions: From Synthesis to Application

Stimuli-responsive polymers undergo changes under different environmental conditions. Among them, phenylboronic acid (PBA) containing polymers (PBA-polymers) are unique, because they can selectively react with diols to generate borates that are sensitive to pH, sugars, and H₂ O₂ , and can be effectively used to synthesize smart drug carriers and self-healing hydrogels. Recently, multifunctional PBA-polymers (MF-PBA-polymers) have been developed using multicomponent reactions (MCRs) to introduce PBA groups into polymer structures. These MF-PBA-polymers have features similar to those of traditional PBA-polymers; moreover, they exhibit additional properties, such as fluorescence, antimicrobial activity, and antioxidant capability, when different MCRs are used. In this mini review, the preparation of these MF-PBA-polymers are summarized and the new properties/functions that have been introduced into these polymers using different MCRs are discussed. The uses of these MF-PBA-polymers as fluorescent cell anticoagulants, drug carriers, and gelators of functional self-healing hydrogels have been discussed. Additionally, the challenges encountered during their preparation are discussed and also the future developments in this field are touched upon.

Synthesis, crystal structure and antibacterial studies of dihydropyrimidines and their regioselectively oxidized products

The syntheses and investigations of new biologically active derivatives of dihydropyrimidines by Biginelli reaction in the presence of copper triflate are reported. Due to the fact that salicylaldehyde and its derivatives under Biginelli reaction conditions can lead to the formation of 2 types of dihydropyrimidines, the influence of copper triflate on product formation was also investigated. In addition to this, regioselective oxidation of dihydropyrimidines was performed in the presence of cerium ammonium nitrate and novel oxidized dihydropyrimidines were obtained. Single crystals of some of them were obtained and as a result, the structures of them were investigated by X-ray diffraction method, which allows determining the presence of hydrogen bonds in their structures. In addition to this, the presence of hydrogen bonds in their structures affects the formation of the corresponding tautomer during oxidizing of dihydropyrimidines. Since dihydropyrimidines are claimed to be biologically active compounds, activities of the synthesized compounds were studied against Acinetobacter baumanii, Escherichia coli, Pseudomonas aeruginosa, Klebsiella pneumoniae and Staphylococcus aureus bacteria.

Known methods of synthesis of dihydropyrimidines and their oxidized products were modified, the impact of hydrogen bonds on stabilization of preferred tautomer and biological activities were studied.

The solvent-free one-pot multicomponent tandem polymerization of 3,4-dihydropyrimidin-2(1H)-ones (DHPMs) catalyzed by ionic-liquid@Fe3O4 NPs: the development of polyamide gels

Solvent-free MCTP via Biginelli DHPMs catalyzed by a non-toxic magnetic catalyst (IL1–2@ Fe₃O₄) in a one-pot reaction was illustrated for the development of fluorescent non-conjugated polyamide gels.

Facile Multicomponent Polymerization and Postpolymerization Modification via an Effective Meldrum's Acid-Based Three-Component Reaction

Providing access to highly diverse polymer structures by multicomponent reactions is highly desirable; efficient Meldrum's acid-based multicomponent reactions, however, have been rarely highlighted in polymer chemistry. Here, the three-component reaction of Meldrum's acid, indole, and aldehyde is introduced into polymer synthesis. Direct multicomponent polymerization of Meldrum's acid, dialdehyde, and diindole can perform under mild conditions, resulting in complex Meldrum's acid-containing polymers with well-defined structures, and high molecular weights. Additionally, nearly quantitative postpolymerization modification can also perform via this Meldrum's acid-based multicomponent reaction. These results indicate that Meldrum's acid-based multicomponent reaction will be a potential tool to prepare novel polymers.

The Hantzsch Reaction in Polymer Chemistry: From Synthetic Methods to Applications

The Hantzcsh reaction is a robust four-component reaction for the efficient generation of 1,4-dihydropyridine (1,4-DHP) derivatives. Recently, this reaction has been introduced into polymer chemistry in order to develop polymers having 1,4-DHP structures in the main and/or side chains. The 1,4-DHP groups confer new properties/functions to the polymers. This mini-review summarizes the recent studies on the development of new functional polymers by using the Hantzsch reaction. Several synthetic approaches, including polycondensation, post-polymerization modification (PPM), monomer to polymer strategy, and one-pot strategy are introduced; different applications (protein conjugation, formaldehyde detection, drug carrier, and anti-bacterial adhesion) of the resulting polymers are emphasized. Meanwhile, the future development of the Hantzsch reaction in exploring new functional polymers is also discussed.

Catalyst-Free Multicomponent Cyclopolymerizations of Diisocyanides, Activated Alkynes, and 1,4-Dibromo-2,3-Butanedione: a Facile Strategy toward Functional Polyiminofurans Containing Bromomethyl Groups

Polymers containing iminofuran (PIFs) are rarely reported due to the lack of simple and effective synthesis methods. In this work, a novel multicomponent cyclopolymerization (MCCP) of diisocyanides, activated alkynes, and 1,4-dibromo-2,3-butanedione using catalyst-free one-pot reactions under mild conditions to prepare PIFs containing bromomethyl groups is reported. PIFs with good solubility and thermal stability are obtained with high M_w s (up to 19 600) and good yields (up to 89.5%) under optimized polymerization conditions. The structure of the PIFs is characterized by nuclear magnetic resonance, Fourier transform infrared spectroscopy, and gel permeation chromatography. The photophysical properties indicate that polymers P1a2b3 and P1c2b3 have cluster-triggered emission characteristics. Thin films made from PIFs quickly degrade under UV irradiation. Moreover, the obtained polymers are decorated with bromomethyl and carboxylate groups in the side chain, which can be postfunctionalized to prepare multifunctional materials, such as star branched polymers and biomedical carrier materials. Thus, this work not only enriches the field of polymerization based on isocyanates and activated alkynes but also provides a facile strategy toward functional iminofuran polymers.

Using One Photoredox Catalyst to Simultaneously Mediate Two Different Polymerizations for Photo-Triggered Multi-Component Orthogonal Polymerizations

The development of multi-component orthogonal polymerizations (MOPs) with simple procedure and high efficiency is crucial for rational polymer synthesis. In this work, photo-triggered Cu(I)-catalyzed azide-alkyne cycloaddition (CuAAC) polymerization are first investigated, employing copper(II) thioxanthone carboxylate (Cu(TX)₂ ) as photoredox catalyst and sunlight as stimuli. Then, the novel MOPs using one photoredox catalyst, Cu(TX)₂ to simultaneously mediate two different photopolymerizations, are successfully realized in one-pot, where photo-induced electron transfer atom transfer radical polymerization and photo-activated CuAAC polymerization can effectively proceed in a one-pot and non-interfering fashion to afford predetermined copolymers with well-defined structure.

Multicomponent Radziszewski Emulsion Polymerization toward Macroporous Poly(ionic liquid) Catalysts

Interconnected macroporous imidazolium-based monoliths are produced via the modified Radziszewski multicomponent reaction (MCR) applied to triamines under high internal phase emulsion (HIPE) conditions. This straightforward one-pot synthesis combines the efficiency and versatility of MCRs with the ease of implementation of the emulsion templating polymerization process. The characterization of the chemical structure and morphology of the resulting materials confirms the formation of the expected macroporous poly(ionic liquid)s (PILs) networks. The promising catalytic activity and recyclability of these porous PIL monoliths are illustrated for the transesterification reaction and the decarboxylation of caffeic acid. In these cases, almost complete conversion is reached while benefiting from the advantages associated with a heterogeneous catalyst.

Modification of Starch via the Biginelli Multicomponent Reaction

An efficient and straightforward modification of starch using renewable and commercially available aromatic aldehydes (benzaldehyde, vanillin, and p-anisaldehyde) and urea via the Biginelli multicomponent reaction is reported in this work. First, starch acetoacetate (SAA) with a degree of substitution ranging from 1.4 to 2.5, depending on the reaction time or the molar ratio of reactants, is prepared. SAA is then modified with different aromatic aldehydes and urea via the Biginelli reaction. The modified products are characterized by ATR-IR, NMR, and gel permeation chromatography (GPC). The processability of the products is also investigated using a hot press instrument, revealing that glycerol is a suitable and renewable plasticizer for the Biginelli products.

Synthesis of Pluri-Functional Amine Hardeners from Bio-Based Aromatic Aldehydes for Epoxy Amine Thermosets

Most of the current amine hardeners are petro-sourced and only a few studies have focused on the research of bio-based substitutes. Hence, in an eco-friendly context, our team proposed the design of bio-based amine monomers with aromatic structures. This work described the use of the reductive amination with imine intermediate in order to obtain bio-based pluri-functional amines exhibiting low viscosity. The effect of the nature of initial aldehyde reactant on the hardener properties was studied, as well as the reaction conditions. Then, these pluri-functional amines were added to petro-sourced (diglycidyl ether of bisphenol A, DGEBA) or bio-based (diglycidyl ether of vanillin alcohol, DGEVA) epoxy monomers to form thermosets by step growth polymerization. Due to their low viscosity, the epoxy-amine mixtures were easily homogenized and cured more rapidly compared to the use of more viscous hardeners (<0.6 Pa s at 22 °C). After curing, the thermo-mechanical properties of the epoxy thermosets were determined and compared. The isophthalatetetramine (IPTA) hardener, with a higher number of amine active H, led to thermosets with higher thermo-mechanical properties (glass transition temperatures (T_g and T_α) were around 95 °C for DGEBA-based thermosets against 60 °C for DGEVA-based thermosets) than materials from benzylamine (BDA) or furfurylamine (FDA) that contained less active hydrogens (T_g and T_α around 77 °C for DGEBA-based thermosets and T_g and T_α around 45 °C for DGEVA-based thermosets). By comparing to industrial hardener references, IPTA possesses six active hydrogens which obtain high cross-linked systems, similar to industrial references, and longer molecular length due to the presence of two alkyl chains, leading respectively to high mechanical strength with lower T_g.

Ferrocene-Containing Polymer via the Biginelli Reaction for In Vivo Treatment of Oxidative Stress Damage

Small molecule antioxidants have little impact on oxidative stress in vivo because of their poor bioavailability. To explore an antioxidant for in vivo applications, a polymeric antioxidant containing a ferrocene moiety was developed. The ferrocene-containing monomer was synthesized through the robust tricomponent Biginelli reaction with a high yield. The corresponding water-soluble copolymer was conveniently prepared via radical polymerization. Both the ferrocene moiety and the Biginelli structure (dihydropyrimidin-2(H)-one) contributed to the remarkable radical scavenging ability of this highly biocompatible copolymer. It was more efficient than traditional small molecule antioxidants at protecting cells against fatal oxidative stress. This copolymer also showed clear therapeutic activity in counteracting oxidation-induced acute liver damage in a live mouse model. Our study into functional organometallic polymers resulted in a promising polymeric biomaterial that may find therapeutic applications and have important implications in the fields of organic chemistry and polymer chemistry.

Ugi Three-Component Polymerization Toward Poly(α-amino amide)s

Due to their great modularity, ease of implementation, and atom economy, multicomponent reactions (MCRs) are becoming increasingly popular macromolecular engineering tools. In this context, MCRs suitable in polymer synthesis are eagerly searched for. This work demonstrates the potential of the Ugi-three component reaction (Ugi-3CR) for the design of polymers and, in particular, of poly(α-amino amide)s. A series of polymers containing amino and amido groups within their backbone were obtained through a one-pot process by reacting aliphatic or aromatic diamines, diisocyanides, and aldehydes. The impact of temperature, concentration, catalyst loading, and substrates on polymerization efficiency is discussed. A preliminary study on the thermal properties and the solution behavior of these poly(α-amino amide)s was carried out. An aliphatic-rich derivative notably showed some pH-responsiveness in water via protonation-deprotonation of its amino groups.

Highly Efficient Synthesis of Substituted 3,4-Dihydropyrimidin-2-(1H)-ones (DHPMs) Catalyzed by Hf(OTf)₄: Mechanistic Insights into Reaction Pathways under Metal Lewis Acid Catalysis and Solvent-Free Conditions

In our studies on the catalytic activity of Group IVB transition metal Lewis acids, Hf(OTf)₄ was identified as a highly potent catalyst for "one-pot, three-component" Biginelli reaction. More importantly, it was found that solvent-free conditions, in contrast to solvent-based conditions, could dramatically promote the Hf(OTf)₄-catalyzed formation of 3,4-dihydro-pyrimidin-2-(1H)-ones. To provide a mechanistic explanation, we closely examined the catalytic effects of Hf(OTf)₄ on all three potential reaction pathways in both "sequential bimolecular condensations" and "one-pot, three-component" manners. The experimental results showed that the synergistic effects of solvent-free conditions and Hf(OTf)₄ catalysis not only drastically accelerate Biginelli reaction by enhancing the imine route and activating the enamine route but also avoid the formation of Knoevenagel adduct, which may lead to an undesired byproduct. In addition, ¹H-MMR tracing of the H-D exchange reaction of methyl acetoacetate in MeOH-d₄ indicated that Hf(IV) cation may significantly accelerate ketone-enol tautomerization and activate the β-ketone moiety, thereby contributing to the overall reaction rate.

Synthesis of selenide-containing polymers by multicomponent polymerization based on γ-butyroselenolactone

A versatile protocol for the synthesis of various multiresponsive selenide-containing polymeric architectures was developed by multicomponent polymerization (MCP) of primary diamines, γ-butyroselenolactone and electrophilic reagents.

Multi-component post-polymerization modification reactions of polymers featuring lignin-model compounds

Biomass derived aromatic aldehydes, vanillin and syringaldehyde, were integrated with multicomponent reaction based polymer synthesis.

Synthesis of copolymers with an exact alternating sequence using the cationic polymerization of pre-sequenced monomers

Alternating copolymers of styrene/methyl vinyl ether and styrene/vinyl alcohol were synthesized. The effect of an alternating sequence on the fluorescence emissions of the products was investigated.