Photocontrolled Living Polymerization Systems with Reversible Deactivations through Electron and Energy Transfer

Nanosheet-Assembled Zirconium-Porphyrin Frameworks Enabling Surface-Confined, Initiator-Free Photosynthesis of Ultrahigh Molecular Weight Polymers

Metal-organic frameworks with well-organized low-dimensional architectures provide significant thermodynamic and/or kinetic benefits for diverse applications. We present here the controlled synthesis of a novel class of hierarchical zirconium-porphyrin frameworks (ZrPHPs) with nanosheet-assembled hexagonal prism morphology. The crystal growth behaviors and structural evolution of ZrPHPs in an additive-modulated solvothermal synthesis are examined, showing an "assembly-hydrolysis-reassembly" mechanism towards the formation of 2D nanosheets with ordered arrangement. Because of the highly-accessible active sites harvesting broadband photons, ZrPHPs serve as adaptable photocatalysts to regulate macromolecular synthesis under full-range visible light and natural sunlight. An initiator-free, oxygen-tolerant photopolymerization system is established, following a distinctive mechanism involving direct photo-induced electron transfer to dormant species and hole-mediated reversible deactivation. Specifically, ZrPHPs provide a surface-confined effect towards the propagating chains which inhibits their recombination termination, enabling the highly-efficient synthesis of ultrahigh molecular weight polymers (Mn >1,500,000) with relatively low dispersity (Đ≈1.5).

Sample illumination device facilitates in situ light-coupled NMR spectroscopy without fibre optics

In situ illumination of liquid-state nuclear magnetic resonance (NMR) samples makes it possible for a wide range of light-dependent chemical and biological phenomena to be studied by the powerful analytical technique. However, the position of an NMR sample deep within the bore of the spectrometer magnet renders such illumination challenging. Here, we demonstrate the working principles of a sample illumination device (NMRtorch) where a lighthead containing an LED array is positioned directly at the top of an NMRtorch tube which is inserted into the NMR spectrometer. The wall of the tube itself acts as a light guide, illuminating the sample from the outside. We explore how this new setup performs in a number of photo-NMR applications, including photoisomerisation and photo-chemically induced dynamic nuclear polarisation (photo-CIDNP), and demonstrate the potential for ultraviolet (UV) degradation studies with continuous online NMR assessment. This setup enables users of any typical liquid-state spectrometer to easily perform in situ photo-NMR experiments, using a wide range of wavelengths.

Photoinduced Controlled/Living Polymerizations

The application of photochemistry in polymer synthesis is of interest due to the unique possibilities offered compared to thermochemistry, including topological and temporal control, rapid polymerization, sustainable low-energy processes, and environmentally benign features leading to established and emerging applications in adhesives, coatings, adaptive manufacturing, etc. In particular, the utilization of photochemistry in controlled/living polymerizations often offers the capability for precise control over the macromolecular structure and chain length in addition to the associated advantages of photochemistry. Herein, the latest developments in photocontrolled living radical and cationic polymerizations and their combinations for application in polymer syntheses are discussed. This Review summarizes and highlights recent studies in the emerging area of photoinduced controlled/living polymerizations. A discussion of mechanistic details highlights differences as well as parallels between different systems for different polymerization methods and monomer applicability.

Simple Full-Spectrum Heterogeneous Photocatalyst for Photo-induced Atom Transfer Radical Polymerization (ATRP) under UV/vis/NIR and its Application for the Preparation of Dual Mode Curing Injectable Photoluminescence Hydrogel

The utilizing light with broadband range has attracted lots of research interest for the photo induced reversible-deactivation radical polymerization (RDRP). However, it is still a challenge for a single catalyst to simultaneously respond to various lights with highly varied wavelengths. Here, we proposed a simple strategy for the preparation of a heterogeneous photocatalyst suitable for photo induced atom transfer radical polymerization (photoATRP) under full spectrum (from UV/vis light to NIR), by combining pyridine nitrogen doped carbon dots (N-CDs) and upconversion nanoparticles (UCNPs). In the presence of these robust UCNP@SiO₂@N-CDs composite particles, the photoATRP could be carried on under the different irradiations of UV, blue, green, red, white, and 980 nm NIR light, with a low loading of part per million concentrations of the CuBr₂/L catalyst. Moreover, the excellent solvent and aqueous compatibility allow UCNP@SiO₂@N-CDs to be capable for photoATRP in both organic solvents and aqueous media, providing well-defined hydrophobic and hydrophilic polymers with low dispersity and excellent chain-end fidelity. In addition, the photoATRP with 980 nm NIR exhibited excellent penetrations through visible-light-proof barriers. The system could be used for the preparation of an injectable hydrogel that had dual curing and photoluminescence modes. Owing to the "living" characteristics of polymer chains achieved through ATRP, the hydrogel was capable to be easily repaired by using monomer as the binder.

Red-Light-Induced, Copper-Catalyzed Atom Transfer Radical Polymerization

Despite advances in photochemical atom transfer radical polymerization (photoATRP), these systems often rely on the use of UV light for the activation/generation of the copper-based catalytic species. To circumvent the problems associated with the UV light, we developed a dual photoredox catalytic system to mediate photoinduced ATRP under red-light irradiation. The catalytic system is comprised of a Cu catalyst to control the polymerization via ATRP equilibrium and a photocatalyst, such as zinc(II) tetraphenylporphine or zinc(II) phthalocyanine, to generate the activator Cu^I species under red-light irradiation. In addition, this system showed oxygen tolerance due to the consumption of oxygen in the photoredox reactions, yielding well-controlled polymerizations without the need for deoxygenation processes.

Photoinduced Organocatalyzed Atom Transfer Radical Polymerization (O-ATRP): Precision Polymer Synthesis Using Organic Photoredox Catalysis

The development of photoinduced organocatalyzed atom transfer radical polymerization (O-ATRP) has received considerable attention since its introduction in 2014. Expanding on many of the advantages of traditional ATRP, O-ATRP allows well-defined polymers to be produced under mild reaction conditions using organic photoredox catalysts. As a result, O-ATRP has opened access to a range of sensitive applications where the use of a metal catalyst could be of concern, such as electronics, certain biological applications, and the polymerization of coordinating monomers. However, key limitations of this method remain and necessitate further investigation to continue the development of this field. As such, this review details the achievements made to-date as well as future research directions that will continue to expand the capabilities and application landscape of O-ATRP.

End-functionalized polymers by controlled/living radical polymerizations: synthesis and applications

This review focuses on end-functionalized polymers synthesized by controlled/living radical polymerizations and the applications in fields including bioconjugate formation, surface modification, topology construction, and self-assembly.

Acridinium salts as photoredox organocatalysts for photomediated cationic RAFT and DT polymerizations of vinyl ethers

A series of acridinium salts with high excited-state oxidative power are employed as photoredox organocatalysts for photomediated cationic RAFT and DT polymerizations under visible light.

Organocatalytic PET-RAFT polymerization with a low ppm of organic photocatalyst under visible light

The development of light-mediated controlled radical polymerization has benefited from the discovery of novel photocatalysts, which could allow precise light control over the polymerization process and the production of well-defined polymers.

Aqueous broadband photopolymerization on microreactor arrays: from high throughput polymerization to fabricating artificial cells

Microreactor arrays combining ZnO and polyaniline are fabricated onto the bottom of multi-well plates to catalyze broadband sunlight-driven open-to-air polymerization in aqueous media.

Reusable polymer brush-based photocatalysts for PET-RAFT polymerization

Fluorescein polymer-brush functionalized glass beads synthesize polymers via photoelectron reversible addition fragmentation chain transfer (PET-RAFT) polymerization. These shelf stable heterogeneous catalysts can be recycled after simple filtration.

Organocatalytic, Stereoselective, Cationic Reversible Addition-Fragmentation Chain-Transfer Polymerization of Vinyl Ethers

Tacticity is a crucial factor affecting the properties of synthetic polymer materials. Here, we introduce a type of chiral organic Brønsted acid catalyst, 1,1'-bi-2-naphthol-derived N,N'-bis(triflyl)phosphoramidimidates (PADIs), for the cationic polymerization of vinyl ethers, which enables the development of the first organocatalytic, highly stereoselective, cationic reversible addition-fragmentation chain-transfer (RAFT) polymerization of vinyl ethers with a trithiocarbonate chain-transfer agent. This metal-free RAFT process could afford isotactic poly(vinyl ethers) with high stereoselectivity, controllable molecular mass, and narrow dispersity at low catalyst loadings (as low as 200 ppm). Moreover, the trithiocarbonate chain-end allows for chain extension to synthesize diblock copolymers comprising an isotactic poly(vinyl ether) block, by a mechanistic switching from stereoselective cationic RAFT polymerization to visible-light-regulated cationic and radical RAFT polymerization.

Recent advances in externally controlled ring-opening polymerisations

Switchable catalysis is a powerful tool in the polymer chemist's toolbox as it allows on demand access to a variety of polymer architectures. Switchable catalysts operate by the generation of a species which is chemically distinct in behaviour and structure to the precursor. This difference in catalytic activity has been exploited to allow spatiotemporal control over polymerisations in the synthesis of (co)polymers. Although switchable methodologies have been applied to other polymerisation mechanisms for quite some time, for ring opening polymerisation (ROP) reactions it is a relatively young area of research. Despite its infancy, the field is accelerating rapidly. Here, we review recent developments for selected external stimuli for ROP, including redox chemistry, light, allosteric and mechanical control. Furthermore, a brief review on switch catalysis involving exogeneous gases will also be provided, although this area differs from traditional switchable catalysis techniques. An outlook on the future of switchable catalysis is also provided.

Phenacyl Phenothiazinium Salt as a New Broad-Wavelength-Absorbing Photoinitiator for Cationic and Free Radical Polymerizations

A novel broad-wavelength-absorbing photoinitiator based on phenacyl phenothiazinium hexafluroantimonate (P-PTh) possessing both phenacyl and phenothiazine chromophoric groups was reported. P-PTh absorbs light at UV, Visible and Near-IR region. Photophysical, photochemical, and computational investigations revealed that P-PTh in solution decomposes at all wavelengths by homolytic and heterolytic cleavages and generates cationic and radical species, which could efficiently initiate cationic and free radical polymerizations. It is anticipated that the photoinitiator with such wavelength flexibility may open up new pathways in curing applications of formulations of pigment systems.

Metal-Free Organocatalyzed Atom Transfer Radical Polymerization: Synthesis, Applications, and Future Perspectives

Reversible deactivation radical polymerization (RDRP) is a class of powerful techniques capable of synthesizing polymers with a well-defined structure, properties, and functionalities. Among the available RDRPs, ATRP is the most investigated. However, the necessity of a metal catalyst represents a drawback and limits its use for some applications. O-ATRP emerged as an alternative to traditional ATRP that uses organic compounds that catalyze polymerization under light irradiation instead of metal. The friendly nature and the robustness of O-ATRP allow its use in the synthesis of tailorable advanced materials with unique properties. In this review, the fundamental aspects of the reductive and oxidative quenching mechanism of O-ATRP are provided, as well as insights into each component and its role in the reaction. Besides, the breakthrough recent studies that applied O-ATRP for the synthesis of functional materials are presented, which illustrate the significant potential and impact of this technique across diverse fields.

Photopolymerization performed under dark conditions using long-stored electrons in carbon nitride

In nature, the chemical energy and electrons stored in ATP and NADPH generated during irradiation can facilitate biochemical reactions under dark conditions. However, in artificial photoreaction systems, it is still very difficult to perform photoreactions under dark conditions due to the fact that the photogenerated charge pairs can recombine immediately upon ceasing the irradiation. Preventing the recombination of photogenerated charge pairs still constitutes a major challenge at present. Here, it is reported that functionalized carbon nitride nanomaterials having many heptazine rings with a positive charge distribution, which can tightly trap photogenerated electrons, efficiently prevent the recombination of photogenerated charges. These stored charges are exceedingly long-lived (up to months) and can drive photopolymerization without light irradiation, even after one month. The system introduced here demonstrates a new approach for storing light energy as long-lived radicals, enabling photoreactions under dark conditions.

Visible-Light Photocatalytic Oxidation of DMSO for RAFT Polymerization†

The solvent is an important, yet often forgotten part of a reaction mechanism. Many photochemical polymerizations are carried out using dimethyl sulfoxide (DMSO) as a way to promote the solubility of both the reactants and products, but its reactivity is rarely considered when initiation mechanisms are proposed. Herein, the oxidation of DMSO by an excited-state quinone is used to form initiating radicals resulting in the polymerization of methacrylate monomers, and the polymerization can be controlled with the addition of a chain transfer agent. This process leads to the formation of polymers with narrow molecular weight distribution, and the polymerization is able to be carried out in the presence of oxygen. A visible light absorbing substituted anthraquinone is synthesized, and nanosecond transient absorption spectroscopy is used to monitor the intermediates involved in the initiation mechanism. Photoproduct analysis indicates formation of methyl radicals as a result of DMSO oxidation. Furthermore, we show that the solvent outcompetes the chain transfer agent for interacting with the excited-state anthraquinone. These observations have a broad impact on photoinduced polymerizations performed in DMSO as many photocatalysts are strong oxidants in the excited state and are capable of reacting with the solvent. Therefore, the role of the solvent needs to be more carefully considered when proposing mechanisms for photoinduced polymerizations in DMSO.

Metal-free atom transfer radical polymerization with ppm catalyst loading under sunlight

Organocatalytic atom transfer radical polymerization (O-ATRP) is recently emerging as an appealing method for the synthesis of metal-free polymer materials with well-defined microstructures and architectures. However, the development of highly effective catalysts that can be employed at a practical low loading are still a challenging task. Herein, we introduce a catalyst design logic based on heteroatom-doping of polycyclic arenes, which leads to the discovery of oxygen-doped anthanthrene (ODA) as highly effective organic photoredox catalysts for O-ATRP. In comparison with known organocatalysts, ODAs feature strong visible-light absorption together with high molar extinction coefficient (ε455nm up to 23,950 M-1 cm-1), which allow for the establishment of a controlled polymerization under sunlight at low ppm levels of catalyst loading.

Screening RAFT agents and photocatalysts to mediate PET-RAFT polymerization using a high throughput approach

We report a high throughput approach for the screening of RAFT agents and photocatalysts to mediate photoinduced electron/energy transfer-reversible addition–fragmentation chain transfer (PET-RAFT) polymerization.

Initiation of RAFT Polymerization: Electrochemically Initiated RAFT Polymerization in Emulsion (Emulsion eRAFT), and Direct PhotoRAFT Polymerization of Liquid Crystalline Monomers

We report on two important advances in radical polymerization with reversible addition–fragmentation chain transfer (RAFT polymerization). (1) Electrochemically initiated emulsion RAFT (eRAFT) polymerization provides rapid polymerization of styrene at ambient temperature. The electrolytes and mediators required for eRAFT are located in the aqueous continuous phase separate from the low-molar-mass-dispersity macroRAFT agent mediator and product in the dispersed phase. Use of a poly(N,N-dimethylacrylamide)-block-poly(butyl acrylate) amphiphilic macroRAFT agent composition means that no added surfactant is required for colloidal stability. (2) Direct photoinitiated (visible light) RAFT polymerization provides an effective route to high-purity, low-molar-mass-dispersity, side chain liquid-crystalline polymers (specifically, poly(4-biphenyl acrylate)) at high monomer conversion. Photoinitiation gives a product free from low-molar-mass initiator-derived by-products and with minimal termination. The process is compared with thermal dialkyldiazene initiation in various solvents. Numerical simulation was found to be an important tool in discriminating between the processes and in selecting optimal polymerization conditions.

Light-mediated controlled and classical polymerizations of less-activated monomers under high-pressure conditions

An entirely new robust setup combining light and high pressure was applied to polymerize less-activated monomers via three different “green” polymerization protocols.

Heterogeneous photocatalytic reversible deactivation radical polymerization

Photocatalytic reversible deactivation radical polymerization (RDRP) permits the use of sustainable solar light for spatiotemporal regulation of radical polymerization under mild conditions.